Universal Wireless Repeater

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6 ... 24, 25, 26  Next
Author Message
JohnnyPrimus
DD-WRT User


Joined: 26 Oct 2006
Posts: 369

PostPosted: Tue Dec 05, 2006 12:27    Post subject: Reply with quote
WEP version posted....

Didn't get a chance to test it very much, let me know of any issues....
Sponsor
marcjohnson
DD-WRT User


Joined: 23 Nov 2006
Posts: 71

PostPosted: Tue Dec 05, 2006 14:27    Post subject: Reply with quote
JohnnyPrimus: thanks for the autoap firmware updates. I will flash and test tonite. I have updated the wiki to point to the autoap firmware (if you want testers).

louis: I think earlier you were asking about MAC addresses... SNMP shows this: http://www.dd-wrt.com/wiki/index.php/SNMP
...Not the level of logging requested, but maybe it will help with testing.
aubade
DD-WRT Novice


Joined: 11 Oct 2006
Posts: 23

PostPosted: Wed Dec 06, 2006 1:42    Post subject: Reply with quote
thank you very much for the wiki, mj

i just set-up a repeater..

first of all, the latest beta version (12-02) did not work properly. i couldnt select a wireless channel and wireless then didnt work at all. with the 09-11 version thinks worked smoothly.

my only problem is, that i cant seem to get WPA-PSK to work in the repeater

my setup:

[AP] <- WPA-PSK (works fine) -> [REPEATER] <- WPA-PSK (not working) -> [LAPTOP]

the connection repeater <-> laptop wont seem to work in WPA-PSK :-(

anyone having similar problems?
aubade
DD-WRT Novice


Joined: 11 Oct 2006
Posts: 23

PostPosted: Wed Dec 06, 2006 11:17    Post subject: Reply with quote
... it works when i use WEP for the connection REPEATER <-> Laptop....
marcjohnson
DD-WRT User


Joined: 23 Nov 2006
Posts: 71

PostPosted: Wed Dec 06, 2006 13:02    Post subject: Reply with quote
aubade: thanks for testing and posting your results.

Using v9-11, I have gotten WPA-PSK working on both physical and virtual interfaces simultaneously; some users go through a few iterations with the security settings, though.

I notice v12-06 was just posted in quick succession to v12-02. If anyone tests the latest version in repeater mode, please let us know how it goes.
aubade
DD-WRT Novice


Joined: 11 Oct 2006
Posts: 23

PostPosted: Wed Dec 06, 2006 15:23    Post subject: Reply with quote
just flashed the 12-06 and got it working so far.... WPA-PSK i will try next...

just a general question upfront: do the repeater and AP need to run on the same channel? and if not, where can i change it? i have my AP on channel 1, want the router to use a diff channel though (to reduce interference). i went the wireless tab and changed the channel of the physical interface to channel 12 - didnt result in any changes though...
marcjohnson
DD-WRT User


Joined: 23 Nov 2006
Posts: 71

PostPosted: Wed Dec 06, 2006 15:29    Post subject: Reply with quote
autoblade: Thats great news regarding 12-06. I have added this compatibility info to the wiki. About the channel: I simply set the channel to "auto" per the wiki (see step 4). Works for me. Smile
aubade
DD-WRT Novice


Joined: 11 Oct 2006
Posts: 23

PostPosted: Wed Dec 06, 2006 16:24    Post subject: Reply with quote
i still cant get WPA-PSK (TKIP) to work, but at least the repeater runs stable in WEP (12-06)
marcjohnson
DD-WRT User


Joined: 23 Nov 2006
Posts: 71

PostPosted: Thu Dec 07, 2006 14:15    Post subject: Reply with quote
Repeater mode seems to run with latest build (2006-1207).

Last edited by marcjohnson on Sun Dec 10, 2006 2:47; edited 1 time in total
rigbyorange
DD-WRT Novice


Joined: 08 Dec 2006
Posts: 12

PostPosted: Fri Dec 08, 2006 4:54    Post subject: Reply with quote
Hello,
Is there a way to set up the repeater so that the same ssid of the "main" network can be repeated? Also would like to know if the repeater can pass dhcp from the "main"network so that when a user roams between the repeater and the ap, that usere will not need to switch to a new subnet.
Thanks
marcjohnson
DD-WRT User


Joined: 23 Nov 2006
Posts: 71

PostPosted: Fri Dec 08, 2006 14:18    Post subject: Reply with quote
rigbyorange: yes, you can use the same ssid on the repeated network. using a different subnet is required now... haven't gotten it to work on the same subnet, but maybe that will change in the future.

Your requirements sound like WDS; have you tried that?
sufrano63
DD-WRT User


Joined: 06 Jun 2006
Posts: 488

PostPosted: Fri Dec 08, 2006 15:38    Post subject: Reply with quote
Is using UWR require both primary and repeater routers running the same v24 build? I'm running v23 on my primary router and don't want to change the settings, but still want to implement your UWR. Can the primary router runs v23 and repeater using v24.

Thanks
Good job and great write-ups

_________________
блог путешественника
marcjohnson
DD-WRT User


Joined: 23 Nov 2006
Posts: 71

PostPosted: Fri Dec 08, 2006 16:33    Post subject: Reply with quote
sufrano63: only the repeater requires dd-wrt 24 or newer. all other devices (client and devices repeated) do not require dd-wrt (could be other vendor / version even).
Spudz777
DD-WRT Novice


Joined: 28 Nov 2006
Posts: 17

PostPosted: Fri Dec 08, 2006 16:37    Post subject: Reply with quote
sufrano63 wrote:
Is using UWR require both primary and repeater routers running the same v24 build? I'm running v23 on my primary router and don't want to change the settings, but still want to implement your UWR. Can the primary router runs v23 and repeater using v24.

Thanks
Good job and great write-ups


The universal repeater mode described here doesn't depend at all on the main router. My main router is a D-link, running D-link firmware, but my WR850G running dd-wrt v24 has no trouble picking up the signal and repeating it. The only issues are a) you have to set up a different subnet for clients of the repeater and b) there are issues with the security settings (see the bug tracker here).
chrisjwhite
DD-WRT Novice


Joined: 09 Dec 2006
Posts: 4

PostPosted: Sat Dec 09, 2006 4:44    Post subject: Help please Reply with quote
I'm having a heck of a time getting this to work.
Main Router is a USR8054, IP of 192.168.123.254

repeater is WRT54GL v1.1 useing 'dd-wrt.v24_generic.bin'
I set the IP as 192.168.1.1,
Everything else is exactly as it is in the Wiki. It's just not repeting the USR's signal. The USR shows it connecting in it's logs, but it doesn't get an IP address.
Here is a small sample of the USR log
Dec/08/2006 23:19:08 DHCP lease IP 192.168.123.100 to athlon64 00-0f-ea-0b-2b-1b
Dec/08/2006 23:19:04 DHCP lease IP 192.168.123.100 to athlon64 00-0f-ea-0b-2b-1b
Dec/08/2006 23:19:03 Wireless PC connected 00-0f-ea-0b-2b-1b
Dec/08/2006 23:17:20 Wireless PC connected 00-18-39-ed-0b-6d
Dec/08/2006 23:13:57 DHCP Request success 24.24.xx.xxx
Dec/08/2006 23:13:57 DHCP Request 24.24.xx.xxx
Dec/08/2006 23:13:57 DHCP Discover
Dec/08/2006 23:13:55 IP with zero length Detect 0.0.0.0:0 0.0.0.0:0 Packet Dropped
Dec/08/2006 23:13:55 Wireless PC connected 00-0f-ea-0b-2b-1b
Dec/08/2006 23:13:53 AP mode Ready. Channel : 6 SSID : USR8054

the "00-18-39-ed-0b-6d" is the linksys

If anyone has any ideas on how to get this working, it'd be much appreciated.
Goto page Previous  1, 2, 3, 4, 5, 6 ... 24, 25, 26  Next Display posts from previous:    Page 5 of 26
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum