Posted: Sun Jul 04, 2010 1:41 Post subject: WRT160NL Repeater
I have a WRT160NL set up as my primary router, and I just purchased another one to use as a repeater.
I have the latest firmware for the repeater and followed the instructions on the sticky thread for configuring the atheros-based router as a repeater, but when I run the site survey and connect to my primary router, nothing happens, I don't get connected to the LAN and pull an IP.
Are the instructions wrong or is there a step I may have missed?
Attached are the wireless settings which are what connects to the primary router.
Joined: 27 Dec 2007 Posts: 932 Location: Orange, MA
Posted: Mon Jul 05, 2010 13:21 Post subject:
I sent you a reply to your PM. _________________
6 X WRT54G-TM
1 X WRT54G V1.0
1 X WRT54G V2.2
1 X WRT54G V5.0
2 X WRT54GS V1.0
2 X WRT54GS V1.1
1 X WRT54GS V2.0
1 X WRT160NL v1.0
1 X WRT320N
2 X WRT350N
1 X WRT600N v1.0
2 X WRT610N v1.0
1 X E1500
i believe i have the same problem
can you post the solution here
or please pm me thank you
and one another question
after i set the repeter's(160nl) ip to 192.168.2.199 and hit apply
i cant access the configuration page by any ip
my primary router ip is 192.168.2.1 and gives ip from 192.168.2.100 to .199