Eko 14583/14584 06/09/10 - w/ fixes for some 14569 issues.

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
edrikk
DD-WRT User


Joined: 31 Oct 2009
Posts: 186
Location: Canada

PostPosted: Wed Jun 09, 2010 17:41    Post subject: Eko 14583/14584 06/09/10 - w/ fixes for some 14569 issues. Reply with quote
NEWD/NEWD2/VINT 14583 is also out:


http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Fothers%2Feko%2FV24_TNG%2Fsvn14583/

K26 14584 is out... Fixing the issue:

http://www.dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FV24-K26%2Fsvn14584%2F
Sponsor
Phonism
DD-WRT User


Joined: 27 Sep 2008
Posts: 449
Location: Norway

PostPosted: Wed Jun 09, 2010 18:27    Post subject: Reply with quote
Please note that these are K2.6 builds - not K2.4.

[EDIT-redhawk] V24 are also now available....14583

So, is this another selling point to the wife to upgrade to a new E3000? I need a new router that supports K2.6 builds Razz

_________________

Asus RT-AC66U DD-WRT v24-sp2 giga - build 25015 [Main]
Linksys E3000 DD-WRT v24-sp2 mega - build 15962 [Backup]
Linksys WRT600N v1.1 DD-WRT v24-sp2 (08/12/10) mega - build 14929 [Retired]
Linksys WRT54GS v4 DD-WRT v24-sp2 mini - build 15747 [Retired]
E3000 Info | WRT600N Info | Know-it-all thread
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11478
Location: Wherever the wind blows- North America

PostPosted: Wed Jun 09, 2010 19:59    Post subject: Reply with quote
Confirmed...the GUI problem on the status tab is now fixed with this build.

But my other reported problem with R mode in the 14569 thread is still present.

redhawk

_________________
I do NOT provide personal assistance through chat or phone....so please don't ask.
jumran
DD-WRT User


Joined: 31 Jul 2009
Posts: 492
Location: Toronto, ON, CA

PostPosted: Wed Jun 09, 2010 21:16    Post subject: Reply with quote
Is the K2.6 UPNP bug fixed?
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11478
Location: Wherever the wind blows- North America

PostPosted: Wed Jun 09, 2010 22:07    Post subject: Reply with quote
I installed 14583 NEWD_Micro_plus_ssh on a V8 unit...It took over 10 minutes for the CPU load average to settle down.

"httpd -p 80" process hogging CPU cycles during this time.

After 10 minutes, it settled down to 0.24...during the 10 minutes it was as high as 2.11

redhawk

_________________
I do NOT provide personal assistance through chat or phone....so please don't ask.
luckman212
DD-WRT User


Joined: 20 Jul 2006
Posts: 211

PostPosted: Wed Jun 09, 2010 22:26    Post subject: Reply with quote
flashed my RT-N16 up to 14584M big, up from BS 14473. Didn't do nvram reset, all settings were properly kept and no issues to report. Very Happy Load avg is nice and low, upnp running. Will continue to monitor. So far in the past 14473 had been the best build for me in terms of stability & wireless performance.
jumran
DD-WRT User


Joined: 31 Jul 2009
Posts: 492
Location: Toronto, ON, CA

PostPosted: Wed Jun 09, 2010 22:36    Post subject: Reply with quote
luckman212 wrote:
flashed my RT-N16 up to 14584M big, up from BS 14473. Didn't do nvram reset, all settings were properly kept and no issues to report. Very Happy Load avg is nice and low, upnp running. Will continue to monitor. So far in the past 14473 had been the best build for me in terms of stability & wireless performance.


Please post if UPNP stops working after 24 hours.
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Wed Jun 09, 2010 22:39    Post subject: Reply with quote
jumran wrote:
luckman212 wrote:
flashed my RT-N16 up to 14584M big, up from BS 14473. Didn't do nvram reset, all settings were properly kept and no issues to report. Very Happy Load avg is nice and low, upnp running. Will continue to monitor. So far in the past 14473 had been the best build for me in terms of stability & wireless performance.


Please post if UPNP stops working after 24 hours.


the results won't count due to no reset. or at least will not be conclusive one way or the other. you must start with a clean slate.. what if an nvram variable (no matter if it was entered or part of the firmware default) is causing the issue...

_________________
[Moderator Deleted] Shocked
SpyrosB
DD-WRT User


Joined: 12 Apr 2010
Posts: 136
Location: Greece

PostPosted: Wed Jun 09, 2010 22:46    Post subject: Reply with quote
1.[strike]I have selected NG-Mixed and 20MHz, status page reports a rate of 300Mbps and im sure that in previous version that was 144Mbps. [/strike]

Solved: Radio was Off, turned on and now reports 144Mbps

2. There is still a line in HTB script (/usr/sbin/svqos) that doesn't do anything

http://svn.dd-wrt.com:8000/dd-wrt/ticket/1508

Code:
$TC qdisc add dev $3 parent 1:50 handle 50: sfq perturb 10

_________________
WRT320N converted to E2000 : DD-WRT v24-sp2 (11/21/10) std-usb-nas - build 15778
edrikk
DD-WRT User


Joined: 31 Oct 2009
Posts: 186
Location: Canada

PostPosted: Wed Jun 09, 2010 23:25    Post subject: Reply with quote
barryware wrote:
jumran wrote:
luckman212 wrote:
flashed my RT-N16 up to 14584M big, up from BS 14473. Didn't do nvram reset, all settings were properly kept and no issues to report. Very Happy Load avg is nice and low, upnp running. Will continue to monitor. So far in the past 14473 had been the best build for me in terms of stability & wireless performance.


Please post if UPNP stops working after 24 hours.


the results won't count due to no reset. or at least will not be conclusive one way or the other. you must start with a clean slate.. what if an nvram variable (no matter if it was entered or part of the firmware default) is causing the issue...



Is your issue that the upnp daemon actually crashes, or that it's up but not forwarding ports?

I've run K26 on WRT610Nv2 for a while now (upgrading to almost all releases), and haven't noted a UPNP issue...

That is using uTorrent, PS3, Skype, etc.

I always do a "Reset to Defaults" and run iMacros to automatically reset my values.

Let me know which of the above you're experiencing, and I'll post back tomorrow.
jumran
DD-WRT User


Joined: 31 Jul 2009
Posts: 492
Location: Toronto, ON, CA

PostPosted: Thu Jun 10, 2010 0:21    Post subject: Reply with quote
edrikk wrote:
barryware wrote:
jumran wrote:
luckman212 wrote:
flashed my RT-N16 up to 14584M big, up from BS 14473. Didn't do nvram reset, all settings were properly kept and no issues to report. Very Happy Load avg is nice and low, upnp running. Will continue to monitor. So far in the past 14473 had been the best build for me in terms of stability & wireless performance.


Please post if UPNP stops working after 24 hours.


the results won't count due to no reset. or at least will not be conclusive one way or the other. you must start with a clean slate.. what if an nvram variable (no matter if it was entered or part of the firmware default) is causing the issue...



Is your issue that the upnp daemon actually crashes, or that it's up but not forwarding ports?

I've run K26 on WRT610Nv2 for a while now (upgrading to almost all releases), and haven't noted a UPNP issue...

That is using uTorrent, PS3, Skype, etc.

I always do a "Reset to Defaults" and run iMacros to automatically reset my values.

Let me know which of the above you're experiencing, and I'll post back tomorrow.


See the following ticket.

http://svn.dd-wrt.com:8000/dd-wrt/ticket/1526
edrikk
DD-WRT User


Joined: 31 Oct 2009
Posts: 186
Location: Canada

PostPosted: Thu Jun 10, 2010 16:01    Post subject: Reply with quote
Running K26 on WRT610Nv2:

Uptime 22:00 (hours)


UPnP seems to be still working fine for me...



upnp_up.jpg
 Description:
 Filesize:  3.54 KB
 Viewed:  14351 Time(s)

upnp_up.jpg



upnp.jpg
 Description:
 Filesize:  57.58 KB
 Viewed:  14351 Time(s)

upnp.jpg


geloczigeri
DD-WRT Novice


Joined: 10 Jun 2010
Posts: 4

PostPosted: Thu Jun 10, 2010 18:54    Post subject: Reply with quote
Im using a Linksys WRT320N updated with this firmware: dd-wrt.v24-14584_NEWD-2_K2.6_big.bin

Build 14584 is still working for me, but...
Anyone have issues with CPU usage? My download speed is 30Mbps. Im using uTorrent. After uTorrent started, the CPU load started growing with ~0.1 steps. After a few minutes it was 0.80, but did not exceed this value. I waited a few minutes and usage is around 0.50, constantly downloading at 3.5MB/s.
I think that these values are too high while downloading at 3.5MB/s using P2P. I limited the connections to 500 in uTorrent. In dd-wrt, the TCP timeout is 900ms, UDP is the default 120ms.

Is these values are normal?
Phonism
DD-WRT User


Joined: 27 Sep 2008
Posts: 449
Location: Norway

PostPosted: Thu Jun 10, 2010 19:27    Post subject: Reply with quote
I'm also seeing the httpd using quite some CPU, and I'm not even doing anything.

This is an hour after upgrade:


_________________

Asus RT-AC66U DD-WRT v24-sp2 giga - build 25015 [Main]
Linksys E3000 DD-WRT v24-sp2 mega - build 15962 [Backup]
Linksys WRT600N v1.1 DD-WRT v24-sp2 (08/12/10) mega - build 14929 [Retired]
Linksys WRT54GS v4 DD-WRT v24-sp2 mini - build 15747 [Retired]
E3000 Info | WRT600N Info | Know-it-all thread
FarmerBob
DD-WRT User


Joined: 09 Aug 2009
Posts: 86
Location: The Beach...

PostPosted: Thu Jun 10, 2010 19:42    Post subject: Static Lease Issue with 14583 Reply with quote
Just installed dd-wrt.v24-14583_NEWD_std-nokaid_nohotspot_nostor on a WNDR3300 and in my time after time mindless resetting all the info, this time after setting up the Static Leases and clicking "Apply Settings" the page went blank. I tried to do just one and I got a drop down that said the lease was already set. None of this information shows up in where in any of the pages it should.

Status > LAN page shows Active Clients that are accessing listed with IP and MAC addresses, but not Host Names. -None- listed in DHCP Clients.

UPDATE:
Reloaded with the dd-wrt.v24-14583_NEWD_std-nokaid, and all went as it usually does. I have all the Static Leases how and where they should be now. When I get a chance I will try the other again and see what happens.


Last edited by FarmerBob on Fri Jun 11, 2010 19:38; edited 2 times in total
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum