Joined: 24 Feb 2009 Posts: 2026 Location: Sol System > Earth > USA > Arkansas
Posted: Wed May 26, 2010 5:06 Post subject:
Router updated. Everything seems to work as it should. No problems with start-up scripts or anything like that. Appears to work as it should. Wireless 'almost' seems faster too. Further testing ensues. Will report more tomorrow after some time has passed. _________________ E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]
Try Dropbox for syncing files - get 2.5gb online for free by signing up.
Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support.
Joined: 26 Nov 2008 Posts: 700 Location: Toronto, Canada
Posted: Wed May 26, 2010 18:51 Post subject: NG Mixed not working right
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.
As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2. _________________
Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
Posted: Wed May 26, 2010 20:17 Post subject: Re: NG Mixed not working right
Macgyver wrote:
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.
As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.
I just installed build 14473 mega on all the WDS routers (see signature)
On the 610n_v2 I have wl0 set to NG-Mixed, channel 1, 40Mhz width, lower with WPA2/AES. All my G & N devices connect with no problem. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 26 Nov 2008 Posts: 700 Location: Toronto, Canada
Posted: Wed May 26, 2010 20:20 Post subject: Re: NG Mixed not working right
mac913 wrote:
Macgyver wrote:
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.
As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.
I just installed build 14473 mega on all the WDS routers (see signature)
On the 610n_v2 I have wl0 set to NG-Mixed, channel 1, 40Mhz width, lower with WPA2/AES. All my G & N devices connect with no problem.
At first it was ok....after a few hours the wireless clients are unable to connect...I have not flashed my WDS 610Ns yet...saving that for last...too much to reconfigure and they have 14471 on them...but mine do the same on 14471...channel 6 no problem _________________
Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
I finished installing build 14473 mega K2.6 on the WDS network.
I still had reboot issues with the 610n_v2; under-clocking to 400Mhz has stopped that issue.
When I use the Start-Up Command:
sleep 20
echo "16384" > /sys/module/nf_conntrack/parameters/hashsize
echo "16384" > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
The GUI shows a MAX of 4096 connections, but telnet commands show that the hashsize is 16384 and ip_conntrack_max is 16384. With Build 14144 I would see the correct GUI max of 16384 connections. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Posted: Wed May 26, 2010 20:40 Post subject: Re: NG Mixed not working right
Macgyver wrote:
mac913 wrote:
Macgyver wrote:
When I select NG-Mixed mode, lower channel 1, 40MHz, nothing can connect to the router....If I select Channel 6 it works like a charm...why can't it use channel 1? This is a bug not only on WRT610Nv2, but also on WRT310N, 320N...seems to be definitely a bug with the implementation of 'NG-Mixed' and should be easy to reproduce this bug.
As for 3G/UMTS option, the ZTE668 still not working for Rogers HSPA+ network...no dice on WRT610Nv2.
I just installed build 14473 mega on all the WDS routers (see signature)
On the 610n_v2 I have wl0 set to NG-Mixed, channel 1, 40Mhz width, lower with WPA2/AES. All my G & N devices connect with no problem.
At first it was ok....after a few hours the wireless clients are unable to connect...I have not flashed
my WDS 610Ns yet...saving that for last...too much to reconfigure and they have 14471 on them...but mine do the same on 14471...channel 6 no problem
The WDS is N-5Ghz on all 320 and wl1 on the 610_v2. I'll see how the network will be after a couple of hours. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Thu May 27, 2010 0:46 Post subject:
mac913 wrote:
I finished installing build 14473 mega K2.6 on the WDS network.
I still had reboot issues with the 610n_v2; under-clocking to 400Mhz has stopped that issue.
When I use the Start-Up Command:
sleep 20
echo "16384" > /sys/module/nf_conntrack/parameters/hashsize
echo "16384" > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
The GUI shows a MAX of 4096 connections, but telnet commands show that the hashsize is 16384 and ip_conntrack_max is 16384. With Build 14144 I would see the correct GUI max of 16384 connections.
Are you sure the startup script is running...try running those commands from the command line and then check your nvram variables again.
, except for