wrt54g2 resistor replacement

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods
Author Message
alstair
DD-WRT Novice


Joined: 13 May 2010
Posts: 5

PostPosted: Thu May 13, 2010 2:45    Post subject: wrt54g2 resistor replacement Reply with quote
Slight problem, I'm somewhat new to smd soldering and accidentally ruined a small, SMALL, smd resistor. The resistor has since been removed, but I'm having trouble figuring out exactly what type it is - It's the same as CB29 on the board. (you can see that CB66 is missing.)




Any help would be GREATLY appreciated.
Sponsor
Borage
DD-WRT User


Joined: 26 Nov 2006
Posts: 422

PostPosted: Thu May 13, 2010 2:55    Post subject: Reply with quote
It is a capacitor.
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7628

PostPosted: Thu May 13, 2010 9:57    Post subject: Reply with quote
It is a decoupling capacitor between + and ground to prevent noise from the dram on the + supply.

The router will work without, you will not notice any difference.
I guess it is a 10nF capacitor in case you can't live with knowing that it is missing Smile

_________________
Kernel panic: Aiee, killing interrupt handler!
alstair
DD-WRT Novice


Joined: 13 May 2010
Posts: 5

PostPosted: Thu May 13, 2010 20:57    Post subject: Reply with quote
Hey, if it'll work without it then that's okay by me; one less thing to worry about. Thank you both so much for your help!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum