How do I access 192.168.100.1 via WRT54GL?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
s54
DD-WRT Novice


Joined: 14 Mar 2010
Posts: 1

PostPosted: Sun Mar 14, 2010 18:26    Post subject: How do I access 192.168.100.1 via WRT54GL? Reply with quote
Hi guys,

I have a WRT54GL wireless router with DD-WRT v24-sp2 (10/10/09) std(SVN revision 13064) hooked up to a Motorola Surfboard SB5101 modem.

Long story short, I can never access the modem's 192.168.100.1 address. If I want to access this page, I have to swap ethernet cables every time so that my computer is directly connected to the modem (and not the router). Only then I can access 192.168.100.1.

However, at my buddy's house, we are always able to access 192.168.100.1. He has a WRT54G router with oem (original, non-ddwrt) firmware.

Is this a limitation of the WRT54GL, the dd-wrt firmware, or both? Also, is there anything I can do that will allow me to access the modem's page without swapping cables?

Thanks in advance!
Sponsor
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Sun Mar 14, 2010 21:24    Post subject: Reply with quote
http://www.dd-wrt.com/wiki/index.php/Access_To_Modem_Configuration
_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
norouter34
DD-WRT Novice


Joined: 11 Mar 2019
Posts: 1

PostPosted: Mon Mar 11, 2019 15:55    Post subject: Reply with quote
Try the following steps to login into the 192.168.100.1 :

1. Open the local browser on your system. We recommend that you use Google Chrome.

2. In the address bar, just like you enter a URL, you need to enter the https://192.168.100.1, before doing so make sure it is the correct IP to be used when accessing your default router login IP. You can get it checked from the router’s manufacturers site.

3. In case you wish to change this IP address due to address clash.There are two ways to change it

Using the web page settings

Using a setup CD

There area also other similar router ip address like 192.168.1.254


Last edited by norouter34 on Sat Mar 30, 2019 2:58; edited 1 time in total
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11451
Location: Wherever the wind blows- North America

PostPosted: Tue Mar 12, 2019 21:25    Post subject: Reply with quote
Also, make sure you have the SB connected to the GL's WAN port...not LAN port. I got burned by that once upon a time.

redhawk

_________________
I do NOT provide personal assistance through chat or phone....so please don't ask.
stoneec
DD-WRT Novice


Joined: 12 Feb 2015
Posts: 6

PostPosted: Wed Mar 13, 2019 4:29    Post subject: Reply with quote
in startup should have something like this.

Code:
ifconfig `nvram get wan_ifname`:0 192.168.100.2 netmask 255.255.255.0
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum