Correct me if I'm wrong (users with WRT320N), but uPnP works (I remember the last time I used it on there) - it just gave me over 100% load, but the ports were shown in the uPnP list...
miniupnp should now be working perfectly. Run a program that uses uPnP and then type "iptables -L MINIUPNPD" into the telnet window and you should see an entry for your uPnP program.
Thank you very much autobot for your hard work and eko for the awesome dd-wrt build 13491M NEWD-2 K2.6 Eko.
I can now play cod:mw2 and altitude without a problem ;)
Joined: 01 May 2009 Posts: 274 Location: San Jose, Ca
Posted: Sat Dec 26, 2009 0:20 Post subject:
ok so i ran the code that autobot sent to me through a pm and it is working fine! thanks man!
EDIT: ok so my xbox 360 cant not connect to live because it says it is having MTU issues...my ps3 works fine though so i dont get it....any suggestions? _________________ E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
miniupnp should now be working perfectly. Run a program that uses uPnP and then type "iptables -L MINIUPNPD" into the telnet window and you should see an entry for your uPnP program.
Thank you very much autobot for your hard work and eko for the awesome dd-wrt build 13491M NEWD-2 K2.6 Eko.
I can now play cod:mw2 and altitude without a problem ;)
Ok I did this and it works great, but do I need to do anything else to make sure this persists through reboots? I assume that resetting the router will require me to redo this but does power cycling and rebooting require me to redo this?
You guys need to read the thread and you will see it points to my miniupnpd installation thread which tells you in the first line to save the following as a firewall script and why.
Joined: 01 May 2009 Posts: 274 Location: San Jose, Ca
Posted: Sat Dec 26, 2009 21:16 Post subject:
autobot wrote:
You guys need to read the thread and you will see it points to my miniupnpd installation thread which tells you in the first line to save the following as a firewall script and why.
i do so but i still have issues with my xbox saying the MTU or NAT isnt open....ps3 is fine though _________________ E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
You guys need to read the thread and you will see it points to my miniupnpd installation thread which tells you in the first line to save the following as a firewall script and why.
i do so but i still have issues with my xbox saying the MTU or NAT isnt open....ps3 is fine though
There was a little error I think in the IPTable rules. It's nothing major, so no need to worry. Wait until Autobot is able to take a look at my note on the miniupnp thread (which he has mentioned above).
Once he has done that, all that will be needed is a reboot of your router, and things should be good to go.
Joined: 01 May 2009 Posts: 274 Location: San Jose, Ca
Posted: Sat Dec 26, 2009 23:39 Post subject:
ah ok i had no clue...ill be patient _________________ E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
For anyone only reading this thread. The miniupnp 'issue' is fixed. If you reboot your router (if you have added the firewall script already) you will get the latest iptables ruleset, and you'll be good to go. :)