Posted: Sat Jun 17, 2023 20:10 Post subject: New Build - 06/17/2023 - r53001
Welcome to Broadcom r53001 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Linksys E1200 v2
DD-WRT v3.0-r53001 mega (06/17/23)
Linux 4.4.302-st40 #24463 Sat Jun 17 15:17:01 +06 2023 mips
GUI install over r52955
'dd-wrt.v24-53001_NEWD-2_K3.x_mega-nv64k.bin'
used as simple WAP -- all good
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx r53001 / Linux 4.4.302-st40 #9615 SMP Sat Jun 17 14:54:09 +06 2023 armv7l
Previous/Reset: r52955 / no
Mode/Status: Gateway / Up and running for 12:15 hours
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own characteristics. It is a closed source chipset
Can't set channel. You can't disable 5.0 GHz either. Even through the schedule menu.
Set transmitter power 1 mW
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
____________________________________________________________________________________________
Router/Version: Linksys WRT54GL v1.1
Update method: WebUpgrade
File/Kernel: dd-wrt.v24 mini generic r53001 / Linux 2.4.37 #72035 Sat Jun 17 12:48:19 +06 2023 mips
Previous/Reset: r52955 / no
Mode/Status: AP wired and wireless / Up and running for 10 hours
Issues/Errors: Nothing significant
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 56409
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 58362
Broadcom
Asus RT-AC87U R - DD-WRT 58362
Asus RT-N66U - DD-WRT 58381
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: Asus RT-N66U
File: dd-wrt.v24-53001_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r53001 big (06/17/23) (prev. DD-WRT v3.0-r52955 big (06/12/23))
Kernel: Linux 4.4.302-st40 #24459 Sat Jun 17 15:11:47 +06 2023 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed today, OK.
Previous/Reset:
10-05-2022-r50357_linksys-ea6400-webflash / Full reset to dd-wrt default
E3000 Linksys factory load / Full reset to dd-wrt default
Mode/Status: EA6400 AP Mode. Default setup. OpenVPN server as described below / working
E3000 Repeater Mode. Default setup. OpenVPN client as described below / working
