WRT54G2 + micro + PPTP client (service)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Generic Questions
Author Message
testcis
DD-WRT Novice


Joined: 26 Dec 2008
Posts: 1

PostPosted: Fri Dec 26, 2008 23:37    Post subject: WRT54G2 + micro + PPTP client (service) Reply with quote
Hello, Gents

I have two semi-theoretical questions.

1. Is it possible to compile DD-wrt micro firmware that includes PPTP client from standard version of the DD-WRT firmware? I mean is it possible to upload then this firmware to WRT54G2 and to make it workable? It has only 8 MB of RAM but maybe it is possible to cut something that is not important for me…

2. Second question is about Wired Bridging. I know that the Bradcom chipset that is embedded into the WRT54G2 router does support the following functionality:
It is possible to organize bridging between WAN and a few LAN port. It means that, for example, for WRT54G2 we would have:
(WAN, LAN1, LAN2) in one MAC space and (LAN3, LAN4) in another subnet. Even more, LAN3 and LAN4 ports can be located in NAT that is organized by the router.
Is it possible to set up this functionality at the micro DD-wrt using commands, or additional modification is required?


Many thanks in advance
Testcis
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Thu Jan 01, 2009 11:51    Post subject: Re: WRT54G2 + micro + PPTP client (service) Reply with quote
testcis wrote:
Hello, Gents

I have two semi-theoretical questions.

1. Is it possible to compile DD-wrt micro firmware that includes PPTP client from standard version of the DD-WRT firmware? I mean is it possible to upload then this firmware to WRT54G2 and to make it workable? It has only 8 MB of RAM but maybe it is possible to cut something that is not important for me…
just try it
Quote:

2. Second question is about Wired Bridging. I know that the Bradcom chipset that is embedded into the WRT54G2 router does support the following functionality:
It is possible to organize bridging between WAN and a few LAN port. It means that, for example, for WRT54G2 we would have:
(WAN, LAN1, LAN2) in one MAC space and (LAN3, LAN4) in another subnet. Even more, LAN3 and LAN4 ports can be located in NAT that is organized by the router.
Is it possible to set up this functionality at the micro DD-wrt using commands, or additional modification is required?


Many thanks in advance
Testcis


better explanation plz

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
cweick
DD-WRT Novice


Joined: 10 Jul 2009
Posts: 1

PostPosted: Fri Jul 10, 2009 20:47    Post subject: Reply with quote
Did you ever get a recompile of the micro with PPTP working?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Generic Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum