[Ice]

I have a WRT54GL running v24-sp2 std special and it works great (other than QOS crashing the router ).

I currently (temporarily?) have 2 separate internet connections and I wanted to use them both. I've read MLPPP isn't expected until v25 (nor do my ISPs support it) so until then...

Is it possible to have the WRT54GL load-balance or anyhow else utilize both internet connections? If so, help would be appreciated. I'd be happy to write up a guide once it's running for future users as well.

I know a linux box can do it but that defeats the purpose here.

[Ice]

So searching around the forums didn't do me much luck, however, it turns out there is already information online and via the dd-wrt wiki, albeit dated a couple years ago.

My concern now is two-fold:
(1) Is the information (listed below) still valid on the latest v24-sp2 firmware?
(2) How would I restore things back to normal?



References:

Dual-WAN for simple round-robin load equalization:
http://www.dd-wrt.com/wiki/index.php/Dual-WAN_for_simple_round-robin_load_equalization

WRT54GL Dual WAN Guide ~NVRAM Method~ [RoadRunner Guide]"
http://roadrunnerguide.com/dualwan_54gl_nvram.html

Dual / Triple WAN HowTo
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=13869