USB [WebCAMs pwc+spca5xx+ov51x]

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Contributions Upload
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next
Author Message
vlahos
DD-WRT User


Joined: 27 Oct 2006
Posts: 118

PostPosted: Wed Apr 15, 2009 21:11    Post subject: Reply with quote
anychance to add manually webcam support to any build we like (to the one we are already using) ?

without compiling anything i mean...
Sponsor
CaScAdE
DD-WRT Guru


Joined: 18 Jun 2006
Posts: 1110
Location: Kiel (54.4247,10.1721)

PostPosted: Tue Apr 21, 2009 17:38    Post subject: Reply with quote
The image is attached, you only can see the link when logged in.

You could add it manually, just get the files out of my images and copy them to another... Not that hard to do...

_________________
DD-WRT F.A.Q.

Webcam Kiel
wktm
DD-WRT Novice


Joined: 26 Apr 2009
Posts: 4

PostPosted: Sun Apr 26, 2009 12:02    Post subject: WebCam Maxwell PM3 driver? Reply with quote
My AP WZR HP G54
Brush is the DD-WRT v24-sp2 (04/08/09) std-nokaid-usb - build 11886M VINT Eko

Camera
WebCam Bus 003 Device 002: ID 060b: a001 Solid Year Maxwell Compact Pc PM3

Videodev.o and after loading spca5xx.o
DMESG
Show
usb.c: USB device 7 (vend / prod 0xe5c/0x6119) is not claimed by any active driver
Linux video capture interface: v1.00
usb.c: registered new driver spca5xx
LSMOD
Show
spca5xx 637272 0 (unused)
videodev 8016 0 [spca5xx_lite spca5xx]
LS / DEV
Show
console gpio mtd nvram pts scsi urandom
cua kmem mtdblock port pty sound usb
discs mem net ppp random tts zero
full misc null ptmx root tty

V41????
/ v4l/video0????

Do not understand why the video did not load it?
repherb
DD-WRT Novice


Joined: 08 May 2008
Posts: 29

PostPosted: Sat May 16, 2009 18:32    Post subject: Asus WL500W and webcam support Reply with quote
Hi everyone,

upgraded my wl500w to your firmware (dd-wrt.v24-11779_NEWD_mega-webcam.bin) DD-WRT v24-sp2 (03/21/09) mega(SVN revision 11779M NEWD Eko) but still getting "usb.c: USB device 3 (vend/prod 0x46d/0x870) is not claimed by any active driver."

Stupid question... i am quite sure this camera (logitech quickcam express) is supported but i have no idea what to do from here!

After looking on the net, there is a QuickCam driver for Linux for this camera, but i have no idea how to load this up in DD-WRT. Since i am not a guru or expert, I could use some help please!

here's my lsmod:
root@DD-WRT:~# lsmod
Module Size Used by
ip_nat_pptp 2432 0 (unused)
ip_conntrack_pptp 2860 1
ip_nat_proto_gre 1664 0 (unused)
ip_conntrack_proto_gre 2568 0 [ip_nat_pptp ip_conntrack_pptp]
spca5xx 85632 0 (unused)
pwcx 103324 0 (unused)
old_pwc 49144 0 [pwcx]
videodev 8336 0 [spca5xx old_pwc]
etherip 5104 0 (unused)
vfat 12544 1
fat 38880 0 [vfat]
ext3 76932 0 (unused)
jbd 58280 0 [ext3]
ext2 43976 0 (unused)
usb-storage 36920 1
sd_mod 13092 2
scsi_mod 101488 2 [usb-storage sd_mod]
ehci-hcd 22060 0 (unused)
usb-ohci 20352 0 (unused)
usb-uhci 29004 0 (unused)
usbcore 82368 0 [spca5xx old_pwc usb-storage ehci-hcd usb-ohci usb-uhci]

http://192.168.2.1/user/webcam.html shows a completely white screen with no image or text.

any help would be appreciated.

thanks!
Pops
DD-WRT Novice


Joined: 26 Oct 2008
Posts: 25
Location: So. Cal.

PostPosted: Wed May 20, 2009 3:29    Post subject: Reply with quote
CaScAdE wrote:
Pops wrote:
The firmware version is dd-wrtv24(05/24/08)mega-build9526 is the one I have now flashed I am not sure of?


did not get the question in that, sorry.

Pops wrote:
can you link me the correct needed file I can't seem to find the right one.


Try the one attached in this post.

Will this file allow me to use all USB supported devices? Such as , USb Printer, Usb Thumb Drives, USB optical drives, Usb HDD's?
Thx
Pops

_________________
1x Westell 9100EM15 Rev.B Ver.1.02.00.04,
1x WRT350n v1 DD-WRT V24-sp2 (05/21/09) mega - build 12188M NEWD Eko,
1x CyberPower CP-H720P USB 7 Port Hub,
1x LinkStation Pro Duo 1.0tb
1x WRT54GS v.6 DD-WRT v24-sp2 (01/29/09) micro - build 11514
repherb
DD-WRT Novice


Joined: 08 May 2008
Posts: 29

PostPosted: Mon May 25, 2009 20:31    Post subject: Webcam vs other USB items enabled Reply with quote
The USB cores are included in the build for printers, webcams, etc. any abstract items must be added by hand (ie: bluetooth etc)

PS: anyone checked my question or have an answer for my post above please?
Ampersand
DD-WRT User


Joined: 14 Jun 2009
Posts: 52

PostPosted: Sun Jun 14, 2009 13:50    Post subject: Reply with quote
@CaScAdE
Will this Labtec webcam work under your compiled software?

hub.c: new USB device 00:03.1-1.2, assigned address 6
usb.c: USB device 6 (vend/prod 0x46d/0x921) is not claimed by any active driver.


0x921 does not exist on the list.
If so maybe there is any FAQ how to add needed modules to my current software version?
Ampersand
DD-WRT User


Joined: 14 Jun 2009
Posts: 52

PostPosted: Wed Jul 29, 2009 15:03    Post subject: Reply with quote
Forget about my previous question...

Now I have a webcam which is listed here
Quote:
Creative 214 0x041e 0x4051 Creative Live Notebook Pro VF0250 Vc301p GC303 Yes jpeg spca5xx/LE gspca v4l1/v4l2 ****


Even all drivers are loaded webcam is not recognized. Under "dd-wrt.v24-11762_NEWD_std-nokaid_usb-webcam" I could not even see this (usb.c: USB device 5 (vend/prod 0x41e/0x4051) is not claimed by any active driver) info in dmesg. This is an output:
Quote:

CPU ProcId is: 0x00029029, options: 0x0000004d
Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #3189 Fri Mar 13 17:10:31 CET 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 239.20 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x2eb094
partition size = 3067904
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x007f0000 : "linux"
0x00103000-0x003f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x003f0000-0x007f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:51:28 Mar 13 2009
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
PCI: Setting latency timer of device 00:03.0 to 64
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
PCI: Setting latency timer of device 00:03.1 to 64
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 2
ehci_hcd 00:03.1: illegal capability!
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:03.1-1, assigned address 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:03.1-1.1, assigned address 3
usb.c: USB device descriptor short read (expected 18, got 8 )
hub.c: new USB device 00:03.1-1.1, assigned address 4
usb.c: USB device descriptor short read (expected 18, got 8 )
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to 00 24 8c 65 a7 f7.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Linux video capture interface: v1.00
pwc Philips webcam module version 9.0.2 loaded.
pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usb.c: registered new driver Philips webcam
pwc Philips webcam decompressor routines version 9.0-BETA-2
pwc Supports all cameras supported by the main module (pwc).
pwc Adding decompressor for model 645.
pwc Adding decompressor for model 646.
pwc Adding decompressor for model 675.
pwc Adding decompressor for model 680.
pwc Adding decompressor for model 690.
pwc Adding decompressor for model 720.
pwc Adding decompressor for model 730.
pwc Adding decompressor for model 740.
pwc Adding decompressor for model 750.
usb.c: registered new driver spca5xx
spca_core.c: spca5xx driver 00.57.06LE registered

Quote:

Module Size Used by Not tainted
spca5xx 85632 0 (unused)
pwcx 103324 0 (unused)
old_pwc 49144 0 [pwcx]
videodev 8336 0 [spca5xx old_pwc]
ipt_mac 736 4
jffs2 97848 1
ext2 43976 1
usb-storage 36920 2
sd_mod 13092 4
scsi_mod 101488 2 [usb-storage sd_mod]
ehci-hcd 22060 0 (unused)
usbcore 82368 0 [spca5xx old_pwc usb-storage ehci-hcd]
switch-robo 5356 0 (unused)
switch-core 6416 0 [switch-robo]


Of course /dev/v4l... does not exist. Firmware run on Asus WL-500gP v2.

Is anyone on this forum can help me?
soapbox
DD-WRT Novice


Joined: 31 Jul 2009
Posts: 1

PostPosted: Fri Jul 31, 2009 23:09    Post subject: Reply with quote
thanks for share!
&&& and the bay-view from your window is so beatiful
Ampersand
DD-WRT User


Joined: 14 Jun 2009
Posts: 52

PostPosted: Tue Aug 04, 2009 7:08    Post subject: Reply with quote
Is nobody here who can help me? Maybe there is someone who has cross-compile stuff to compile spca module for MIPS from last source...please...
gtsongi
DD-WRT Novice


Joined: 26 Aug 2009
Posts: 1

PostPosted: Wed Aug 26, 2009 8:52    Post subject: Reply with quote
Hi!

I've downloaded the DD-WRT-v24-060508-mega-automount-webcam-080606.bin firmware and flashed my WL-500gP V2 router. The webcam's (which is a Logitech QuickCam Express) LED is on, but there is no image on the /user/webcam.html page, just a white srceen.
Do I need to install spca5xx as well? How can I do that? I've tried it, using Putty but no luck Sad
Sorry if my questions are very amateur, but an absolute newbie!
osos
DD-WRT Novice


Joined: 31 Jul 2008
Posts: 8

PostPosted: Sat Dec 26, 2009 18:03    Post subject: Motion detection Reply with quote
Anyone tried motion detection with motion?

http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome

I would like to set up dd-wrt to monitor the webcam, and record stills (and maybe video/audio) if motion is detected.

Do you think it is posible?
johnny2002
DD-WRT Novice


Joined: 06 Jun 2008
Posts: 8

PostPosted: Thu Jan 07, 2010 2:11    Post subject: any update Reply with quote
Any update to newer version?
Thanks.
pdckxd
DD-WRT Novice


Joined: 30 Dec 2008
Posts: 14

PostPosted: Mon Jan 11, 2010 4:19    Post subject: Reply with quote
I have already successfully complie spca5xx(spca5xx-v4l1goodbye) & new quickcam driver(qc-usb-0.6.6) and spcaview tools(include spcaserv) for dd-wrt v24 sp2. I will soon post a new tutorial for webcam.
rushboy
DD-WRT Novice


Joined: 12 Jan 2010
Posts: 1

PostPosted: Tue Jan 12, 2010 12:01    Post subject: Reply with quote
pdckxd wrote:
I have already successfully complie spca5xx(spca5xx-v4l1goodbye) & new quickcam driver(qc-usb-0.6.6) and spcaview tools(include spcaserv) for dd-wrt v24 sp2. I will soon post a new tutorial for webcam.


very, very expected...
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next Display posts from previous:    Page 3 of 7
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Contributions Upload All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum