linksys wrt54g2 v1.1,is there any chance to flash dd-wrt?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3  Next
Author Message
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Fri May 08, 2009 3:44    Post subject: linksys wrt54g2 v1.1,is there any chance to flash dd-wrt? Reply with quote
ttl output:

+
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 16:13:05, Jun 9 2008

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap65
RAM: 0x80000000-0x81000000, [0x8003f9d0-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
Image loaded from 0x80041000-0x80210000
CPU revision is: 00019064
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB 4-way, linesize 16 bytes.
Linux version 2.4.25-LSDK-5.3.1.31 (root@localhost.localdomain) (gcc version 3.3.3) #1 Mon Jul 21 11:33:44 CST 2008
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600
Using 92.000 MHz high precision timer.
Calibrating delay loop... 183.50 BogoMIPS
Memory: 13712k/16384k available (1659k kernel code, 2672k reserved, 92k data, 80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with no serial options enabled

ttyS00 at 0xb1100003 (irq = 37) is a 16550A
Generic MIPS RTC Driver v1.0
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MTD driver for SPI flash.
spiflash: Probing for Serial flash ...
spiflash: Found SPI serial Flash.
4194304: size
Creating 8 MTD partitions on "spiflash":
0x00000000-0x00030000 : "RedBoot"
0x00030000-0x00310000 : "rootfs"
0x00310000-0x00320000 : "language"
0x00320000-0x00330000 : "factory"
0x00330000-0x00340000 : "NVRAM"
0x00340000-0x003e0000 : "vmlinux.bin.l7"
0x003e0000-0x003ef000 : "FIS directory"
0x003ef000-0x003f0000 : "RedBoot config"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 384 bytes per conntrack
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_trigger : register proc success
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
wlan: 0.8.4.2 (Atheros/multi-bss)
wlan: mac acl policy registered
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
mount: /proc/filesystems: No such file or directory
Using /lib/modules/2.4.25-LSDK-5.3.1.31/net/ae531x.o
Warning: loading ae531x will taint the kernel: non-GPL license - Atheros
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.3.1.31/misc/ar531x-wdt.o
Warning: loading ar531x-wdt will taint the kernel: non-GPL license - Atheros
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.3.1.31/misc/WRT54G2_gpio.o
Warning: loading WRT54G2_gpio will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
(nvram_unset)exclusive zone
shared_nvram->writing 1
device eth0 is not a slave of br0
sh: Can't open /tmp/test_cmd
(nvram_unset)exclusive zone
shared_nvram->writing 1
Enter LAN parsing ...
Set LAN MAC=00:22:6B:9D:43:24
Using /lib/modules/2.4.25-LSDK-5.3.1.31/net/ath_hal.o
Warning: loading ath_hal will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.3.1.31/net/ath_rate_atheros.o
Warning: loading ath_rate_atheros will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.3.1.31/net/ath_dfs.o
Warning: loading ath_dfs will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.3.1.31/net/ath_ahb.o
ath0
wl0_vlan0_config : wl0_vlan0_RTSThPeriod ... failed
wl0_vlan0_config : wl0_vlan0_BasicRate ... failed
AddInterfaceToBridge : Bridge 'br0' is not existing, creating it
device br0 already exists; can't create bridge with the same name
killall: wsccmd: no process killed
killall: wsc_cfg: no process killed
killall: hostapd: no process killed
cp: /etc/wlan/wlanconfig: No such file or directory
Start dhcpd
Start httpd lan

******************************************************
Wi-Fi Simple Config Application - Atheros Communcations
*********************************************************
/bin/sh: Can't open /tmp/del_route
../../common/MasterControl/Info.cpp(157):Read WSC Config File:/tmp/wlan/wsc_config.txt
../../common/MasterControl/Info.cpp(1291):Use br0 address 0:22:6b:9d:43:24
../../common/MasterControl/MasterControl.cpp(1255):MC::SwitchModeOn: EModeApProxyRegistrar enter
../../common/MasterControl/MasterControl.cpp(1275):MC::SwitchModeOn: doesn't have PSK key
../../common/MasterControl/MasterControl.cpp(3120):***** WPA_PSK = 0813C7579189C4BB24ED5FFB82A7D3B8FFF9441363E84ACC43FCBC53CBB23902
../../common/MasterControl/MasterControl.cpp(2916):Generated devPwd: 12345670
../../common/MasterControl/MasterControl.cpp(1405):*** Init Enrolle Stat machine
../../common/MasterControl/MasterControl.cpp(1414):MC::SwitchModeOn: Starting AP
../../common/MasterControl/MasterControl.cpp(3120):***** WPA_PSK = 0813C7579189C4BB24ED5FFB82A7D3B8FFF9441363E84ACC43FCBC53CBB23902
../../common/MasterControl/MasterControl.cpp(1455):MC::SwitchModeOn: Exit
../../common/MasterControl/MasterControl.cpp(382):MC::StartStack: Informing app of mode
../../common/MasterControl/MasterControl.cpp(401):MC::SwitchModeOn: Done callback
../../common/MasterControl/MasterControl.cpp(3120):***** WPA_PSK = 0813C7579189C4BB24ED5FFB82A7D3B8FFF9441363E84ACC43FCBC53CBB23902
ssid=linksys
ssid=linksys
../../common/WscCmd/WscCmd.cpp(541):WC::ActualCBThreadProc: /sbin/hostapd -B /tmp/wlan/hostapd.conf
Configuration file: /tmp/wlan/hostapd.conf
Using interface ath0 with hwaddr 00:22:6b:9d:43:24 and ssid 'linksys'
Flushing old station entries
Deauthenticate all stations
../../common/WscCmd/WscCmd.cpp(329):WC::WaitAPReboot: 329
../../common/MasterControl/MasterControl.cpp(3204):ENRSM:setProcessStatus:0
l2_packet_receive - recvfrom: Network is down
l2_packet_receive - recvfrom: Network is down



BusyBox v1.00-pre10 (2008.07.21-03:35+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

wlan[0,0]->
wlan[0,0]->


Last edited by ink on Fri May 08, 2009 17:15; edited 2 times in total
Sponsor
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Fri May 08, 2009 3:47    Post subject: Reply with quote
cpu:atheros 2317 flash:4MB memory:16MB
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Fri May 08, 2009 3:54    Post subject: Reply with quote
Very Happy
Suirp
DD-WRT Novice


Joined: 07 May 2009
Posts: 8

PostPosted: Sat May 09, 2009 10:43    Post subject: Reply with quote
ink wrote:
cpu:atheros 2317 flash:4MB memory:16MB
so the 1.1 got a bigger memory?
DoesItMatter
DD-WRT Guru


Joined: 10 May 2008
Posts: 1373
Location: Pacific North West, USA

PostPosted: Sat May 09, 2009 12:12    Post subject: Reply with quote
This sounds close to what the Airlink AR-430W and the DIR-300's are.

Those have the AR 2317 chip with 4MB flash and 16MB ram.

_________________
Evil or Very Mad Soylent Green Is People ! Evil or Very Mad
Twisted Evil =-=-=-=-=-=-=-=-=-=-= Twisted Evil
2x Asus RT-N16 - Asuswrt-Merlin 3.0.0.4.376.43
Belkin F7D3302 - Toastman Tomato USB VPN 1.28.7505
Linksys E3000 - Toastman Tomato USB VPN 1.28.7505
-------------------------
2x Buffalo WZR-HP-G300NH V1 - OpenWRT Chaos Calmer 45860
2x Engenius ESR900 - Stock Firmware 1.4.0 / OpenWRT Chaos Calmer 45860
TP-Link WR1043ND V1.8 - Gargoyle 1.7.1
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Sat May 09, 2009 13:32    Post subject: Reply with quote
DoesItMatter wrote:
This sounds close to what the Airlink AR-430W and the DIR-300's are.

Those have the AR 2317 chip with 4MB flash and 16MB ram.


yes,you are right.

So i flash it use dir-300's method and file,but i found some problem after upload ap61.ram and reset:


RedBoot> load ap61.ram
Using default protocol (TFTP)
Entry point: 0x800410bc, address range: 0x80041000-0x800680d8
?Invalid PHY ID1 for enet0 port0. Expected 0x0243, read 0x004d
Ethernet eth0: MAC address 00:22:6b:9d:43:1c
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.1.72
Default server: 192.168.1.72

RedBoot(tm) bootstrap and debug environment [RAM]
production release, version "2.1.3" - built 18:43:37, Sep 20 2007

Platform: ap61 (Atheros WiSOC)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2007, NewMedia-NET GmbH.

Board: DLINK DIR-300
RAM: 0x80000000-0x81000000, [0x8007ff00-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
DD-WRT>
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Sat May 09, 2009 13:39    Post subject: Reply with quote
I think maybe dir-300 switch ic not same as linksys wrt54g2 v1.1

g2's switch ic:atheros ar8216


Last edited by ink on Sat May 09, 2009 13:43; edited 1 time in total
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Sat May 09, 2009 13:41    Post subject: Reply with quote
Suirp wrote:
ink wrote:
cpu:atheros 2317 flash:4MB memory:16MB
so the 1.1 got a bigger memory?


yes ,factory default memory is 16m Very Happy Very Happy
DoesItMatter
DD-WRT Guru


Joined: 10 May 2008
Posts: 1373
Location: Pacific North West, USA

PostPosted: Sat May 09, 2009 13:47    Post subject: Reply with quote
I'm not sure you should've flashed it so quickly...

Board: ap65
RAM: 0x80000000-0x81000000, [0x8003f9d0-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
Image loaded from 0x80041000-0x80210000
CPU revision is: 00019064

is what your's said in 1st post.

the dir-300 is shown as ap61, not ap65

the ap65 rom may need to be modified and loaded onto your router...

_________________
Evil or Very Mad Soylent Green Is People ! Evil or Very Mad
Twisted Evil =-=-=-=-=-=-=-=-=-=-= Twisted Evil
2x Asus RT-N16 - Asuswrt-Merlin 3.0.0.4.376.43
Belkin F7D3302 - Toastman Tomato USB VPN 1.28.7505
Linksys E3000 - Toastman Tomato USB VPN 1.28.7505
-------------------------
2x Buffalo WZR-HP-G300NH V1 - OpenWRT Chaos Calmer 45860
2x Engenius ESR900 - Stock Firmware 1.4.0 / OpenWRT Chaos Calmer 45860
TP-Link WR1043ND V1.8 - Gargoyle 1.7.1
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Sat May 09, 2009 13:55    Post subject: Reply with quote
DoesItMatter wrote:
I'm not sure you should've flashed it so quickly...

Board: ap65
RAM: 0x80000000-0x81000000, [0x8003f9d0-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
Image loaded from 0x80041000-0x80210000
CPU revision is: 00019064

is what your's said in 1st post.

the dir-300 is shown as ap61, not ap65

the ap65 rom may need to be modified and loaded onto your router...




I already have wholeflash backup and i have ic programmer,so ,i don't care about that Very Happy Very Happy
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Sat May 09, 2009 14:03    Post subject: Reply with quote
ok guys.
support is possible but DONT FLASH ANY DIR300 STUFF!!!!

furthermore we need a donated device here in germany for porting.
we can collect some money and i can buy it here in germany so we can reduce shipping cost and time....i saw it for 45€ here.

i cant find it at fcc.gov...can u plz check the correct name

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Sat May 09, 2009 14:51    Post subject: Reply with quote
Sash wrote:
ok guys.
support is possible but DONT FLASH ANY DIR300 STUFF!!!!

furthermore we need a donated device here in germany for porting.
we can collect some money and i can buy it here in germany so we can reduce shipping cost and time....i saw it for 45€ here.

i cant find it at fcc.gov...can u plz check the correct name



I am very pleased to send it to you without power supply,ok? (12v dc)

Please pm me your exact address(address is very important,because i live in China).I will send it out to you as quickly as possible.

Thanks!
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Sat May 09, 2009 16:34    Post subject: Reply with quote
we need a donated device...u wont get it back!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
ink
DD-WRT User


Joined: 08 Jun 2006
Posts: 123

PostPosted: Sun May 10, 2009 6:53    Post subject: Reply with quote
Sash wrote:
we need a donated device...u wont get it back!



Yes,i know,you don't need to send back to me.
Please pm me your exact address,thanks.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Sun May 10, 2009 8:42    Post subject: Reply with quote
ok..just want to be sure Wink

send the router to
    NewMedia-NET GmbH
    c/o Sebastian Gottschall
    Wormser Strasse 5-7
    64625 Bensheim
    Germany

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum