DD-WRT Router Database

Post new topic   Reply to topic    DD-WRT Forum Index -> Announcements
Goto page 1, 2, 3, 4, 5, 6  Next
Author Message
mcmadpete
Site Admin


Joined: 03 Feb 2008
Posts: 28

PostPosted: Sat Jan 31, 2009 8:08    Post subject: DD-WRT Router Database Reply with quote
Hi,

as we did announce on the website we did enable the DD-WRT router database preview. The data is not as complete as we would like it to be, yet but we think that it can help a lot of people to find out if there router is supported much easier and help them to locate the related files.

From the Poll we did enable we know that some guys are experience problems or don't like it. Unfortunatly none of them did give feedback, so we do create this forum topic to discuss any issues.
Sponsor
techie1
DD-WRT Novice


Joined: 02 Sep 2008
Posts: 39

PostPosted: Sat Jan 31, 2009 14:34    Post subject: Reply with quote
For the Belkin F5D7230-4 v2000, v2000de the database shows that micro generic is the correct build. This router requires serial flash builds otherwise it will not boot after flashing. The special instructions link explains this, but the builds in the database appear to be incorrect.
http://dd-wrt.com/wiki/index.php/Installation#Belkin_F5D7230-4_v2000_and_v2000de

Also, this router will support serial flash micro plus builds but they are not listed in the database.
Shadco
DD-WRT User


Joined: 29 Dec 2008
Posts: 214
Location: Lower Brackley on the Chesapeake

PostPosted: Sat Jan 31, 2009 18:28    Post subject: Reply with quote
It's pretty good but I still will really dig around before I take the info for any particular router to be the gospel
_________________
Shad
-----
Linksys WRT600Nv1.1 v24-sp2 11667 BS std
Linksys WRT350Nv1 11650M NEWD Eko std
Linksys WRT300Nv1 11650M NEWD Eko std
Netgear WNR834bv2 v24-sp2 build 11667 BS mini
Linksys NSLU2 Unslung
mcmadpete
Site Admin


Joined: 03 Feb 2008
Posts: 28

PostPosted: Sat Jan 31, 2009 18:57    Post subject: Reply with quote
techie1 wrote:
For the Belkin F5D7230-4 v2000, v2000de the database shows that micro generic is the correct build. This router requires serial flash builds otherwise it will not boot after flashing. The special instructions link explains this, but the builds in the database appear to be incorrect.
http://dd-wrt.com/wiki/index.php/Installation#Belkin_F5D7230-4_v2000_and_v2000de

Also, this router will support serial flash micro plus builds but they are not listed in the database.


Thanks for that feedback. We are currently checking all routers for the correct files and instructions, to every detailed comment is helping us a lot.
mcmadpete
Site Admin


Joined: 03 Feb 2008
Posts: 28

PostPosted: Sat Jan 31, 2009 18:58    Post subject: Reply with quote
Shadco wrote:
It's pretty good but I still will really dig around before I take the info for any particular router to be the gospel

Could you please explain further what the issue is and what we could do to improve this?
Shadco
DD-WRT User


Joined: 29 Dec 2008
Posts: 214
Location: Lower Brackley on the Chesapeake

PostPosted: Sun Feb 01, 2009 0:23    Post subject: Reply with quote
compare the data in the old supported hardware list for the wrt600n v1.1 to the new list for example
_________________
Shad
-----
Linksys WRT600Nv1.1 v24-sp2 11667 BS std
Linksys WRT350Nv1 11650M NEWD Eko std
Linksys WRT300Nv1 11650M NEWD Eko std
Netgear WNR834bv2 v24-sp2 build 11667 BS mini
Linksys NSLU2 Unslung
mcmadpete
Site Admin


Joined: 03 Feb 2008
Posts: 28

PostPosted: Sun Feb 01, 2009 8:45    Post subject: Reply with quote
Shadco wrote:
compare the data in the old supported hardware list for the wrt600n v1.1 to the new list for example

Yes, I see. First priority was providing the stable release release files (v24 SP1). Next is adding the Beta-Version files (v24 SP2). Because we are reviewing all informations for correctness that can take 1 or 2 weeks.
dc
DD-WRT User


Joined: 08 Jun 2006
Posts: 247
Location: Prince Edward Island - Canada

PostPosted: Sun Feb 01, 2009 15:08    Post subject: Reply with quote
Nice job on the interactive database. Great functionality and it is straight-forward to use.

Just a couple of model specific comments. For the Linksys WRT610N the link to the test version of the firmware takes you to the first page of a 'decending date' look at the forum topic. I think the default for the forum is date ascending (ie .. new on last page). Would there be a way to point right at the firmware on page 32 of an ascending list?

For the AIR-LINK AR430W, the information points the user to the d-link 300 files. I know that the units are 'close' or perhaps even clones, but there is actually an official AR430W release that sets all the hardware identity and status information correctly.

Lookups for Buffalo's WHR125 and for the WRT54's and WRT310 look great.
kkilps
DD-WRT Novice


Joined: 01 Jan 2009
Posts: 20

PostPosted: Mon Feb 02, 2009 13:00    Post subject: WNR834b Reply with quote
The new catalog has a generic build as the proper build for Netgear WNR834bv2, but you need to have the NEWD builds from EKO in order to work. The generic build can brick you router.
Markus
Site Admin


Joined: 09 Aug 2006
Posts: 121
Location: Germany, Bensheim

PostPosted: Mon Feb 02, 2009 15:56    Post subject: Reply with quote
Quote:
For the Belkin F5D7230-4 v2000, v2000de the database shows that micro generic is the correct build. This router requires serial flash builds otherwise it will not boot after flashing. The special instructions link explains this, but the builds in the database appear to be incorrect.
http://dd-wrt.com/wiki/index.php/Installation#Belkin_F5D7230-4_v2000_and_v2000de

Also, this router will support serial flash micro plus builds but they are not listed in the database.


OK i have adjust this. Thank you very much for your response.
orange
DD-WRT Guru


Joined: 05 Sep 2007
Posts: 532
Location: 49.50N, 08.44E

PostPosted: Mon Feb 02, 2009 16:17    Post subject: Reply with quote
The database imho works awesome and is a great addition to the somewhat confusing download area (although this should be available in the future as well). I've tested it with the fonera builds as this is my field of interest and I'd like to suggest the following (not sure if that applies to other supported models as well)...

What about introducing links to the latest devel versions along with the stable download links? I mean besides linking v24-sp1 for the fonera, it would be great to have a link to the latest v24-presp2 build as well - maybe as stable and unstable.

What do you think about it?

_________________
7x La Fonera 2100, 1x NanoStation2 Loco
running bleeding edge openwrt backfire/attitude adjustment
or4n9e on irc.freenode.net
osos
DD-WRT Novice


Joined: 31 Jul 2008
Posts: 8

PostPosted: Mon Feb 02, 2009 18:31    Post subject: Reply with quote
orange wrote:
What about introducing links to the latest devel versions along with the stable download links? I mean besides linking v24-sp1 for the fonera, it would be great to have a link to the latest v24-presp2 build as well - maybe as stable and unstable.

What do you think about it?


+1


Also I would like to search the database for the best hardware to buy! Ex: "8mb flash 32 mb ram" or simular.
This would greatly help in deciding which new router to buy.

Or maybe choose which feature-set of dd-wrt I want to run, and show a list of best supported hardware.

My 2 cents.
techie1
DD-WRT Novice


Joined: 02 Sep 2008
Posts: 39

PostPosted: Mon Feb 02, 2009 21:19    Post subject: Reply with quote
I noticed that you link to the ASUS Recovery utility for all of the Asus routers. However, you do not have links to the dd-wrt.v24_mini_asus.trx file. The utility will only accept files in .trx or .img format. The .bin files can only be used after dd-wrt is installed.
Markus
Site Admin


Joined: 09 Aug 2006
Posts: 121
Location: Germany, Bensheim

PostPosted: Tue Feb 03, 2009 8:34    Post subject: Reply with quote
dc wrote:
Would there be a way to point right at the firmware on page 32 of an ascending list?

This make sense Smile

dc wrote:

For the AIR-LINK AR430W, the information points the user to the d-link 300 files. I know that the units are 'close' or perhaps even clones, but there is actually an official AR430W release that sets all the hardware identity and status information correctly.

Ok this should match now.

dc wrote:

Lookups for Buffalo's WHR125 and for the WRT54's and WRT310 look great.

Great to hear!

Thank you very much for making this effort.
Markus
Site Admin


Joined: 09 Aug 2006
Posts: 121
Location: Germany, Bensheim

PostPosted: Tue Feb 03, 2009 9:40    Post subject: Re: WNR834b Reply with quote
kkilps wrote:
The new catalog has a generic build as the proper build for Netgear WNR834bv2, but you need to have the NEWD builds from EKO in order to work. The generic build can brick you router.


Thank you! I have deposited the right files.
Goto page 1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 1 of 6
Post new topic   Reply to topic    DD-WRT Forum Index -> Announcements All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum