I suck at all things Linux and am a Windows user. I noticed a lot of Linux commands in there and was wondering if I need it to flash the Fonera. Is the Linux environment only inside the Fonera?
I flashed it using xp so you should be fine. It looks hard to do, but it wasn't to bad.
It's finished, and it was totally worth it! Most beautiful firmware I've ever seen. Thanks for the encouragement redtrak. It was actually quite hard (my ISP did not let the Fonera connect, so I had to make daemons on my computer and such and such) and tested the limits of my computer knowledge.
I couldn't get my fonera to connect via wget to download the files it needed. So i downloaded them on my windows machine and used WinSCP to transfer them over. Worked like a charm!
I think the reason the fonera couldn't download from the internet is that it was missing dns servers or something related to its networking. Probably something that could be fixed with a little more linux knowledge than what I have.
Posted: Mon Feb 19, 2007 19:58 Post subject: help please
i have a linksys router v4 that has dd-wrt and i have a laptop with no wireless card
how do i use my fonera to act like a wireless receiver for my laptop?
i have also installed dd-wrt on the fonera!
Posted: Mon Feb 19, 2007 20:04 Post subject: Re: help please
prominator wrote:
i have a linksys router v4 that has dd-wrt and i have a laptop with no wireless card
how do i use my fonera to act like a wireless receiver for my laptop?
i have also installed dd-wrt on the fonera!
set wireless to client and internet connection setup to dhcp. this way your fonera recieves an ip via dhcp just like a wlan-card.
choose a lan ip for the fonera. but remeber to choose a different subnet because the client is not bridged.
Posted: Tue Feb 20, 2007 5:54 Post subject: Re: help please
wikking wrote:
prominator wrote:
i have a linksys router v4 that has dd-wrt and i have a laptop with no wireless card
how do i use my fonera to act like a wireless receiver for my laptop?
i have also installed dd-wrt on the fonera!
set wireless to client and internet connection setup to dhcp. this way your fonera recieves an ip via dhcp just like a wlan-card.
choose a lan ip for the fonera. but remeber to choose a different subnet because the client is not bridged.
did not work
1linksys router = AP + wep
2.fonora dd-wrt= ????
imy laptop does not have a wireless
how do enter into the router through lan?
Posted: Tue Feb 20, 2007 13:23 Post subject: Re: help please
prominator wrote:
wikking wrote:
prominator wrote:
i have a linksys router v4 that has dd-wrt and i have a laptop with no wireless card
how do i use my fonera to act like a wireless receiver for my laptop?
i have also installed dd-wrt on the fonera!
set wireless to client and internet connection setup to dhcp. this way your fonera recieves an ip via dhcp just like a wlan-card.
choose a lan ip for the fonera. but remeber to choose a different subnet because the client is not bridged.
did not work
1linksys router = AP + wep
2.fonora dd-wrt= ????
imy laptop does not have a wireless
how do enter into the router through lan?
1) set your laptop to 169.254.255.2 (everything except .1)
2) go to 169.254.255.1 (this should be the foneras address) (maybe on port 80....am not sure right now..just try it out)
3) set the lan ip-address of the fonera to 192.168.3.1 (just an example...use everything but your main routers subnet)
4) set internet connection setup to dhcp (should already be set)
5) on wireless set it to client, enter ssid and set encryption
6) disable firewall (may be not needed)
7) set your laptos nic to dhcp
I've gotten as far as attempting the TFTP of boot.fs. I know the tftp server is running as I can issue a tftp get from the command line on the same pc and it grabs the file.
I set the ip address on the fonera: ip_address -l 192.168.1.254/24 -h 192.168.1.166
I can ping from the fonera to my laptop from within RedBoot.
But everytime I try to TFTP the boot.fs over it says:
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> load -r -v -b 0x80041000 root.fs
Using default protocol (TFTP)
TFTP timed out 1/15
Can't load 'root.fs': operation timed out
No, windows firewall isn't on, no other apps blocking anything.
I can ping the fonera from my laptop so connectivity is definitely there.
my fis list output is here:
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0xA8000000 0xA8000000 0x00030000 0x00000000
FIS directory 0xA87E0000 0xA87E0000 0x0000F000 0x00000000
RedBoot config 0xA87EF000 0xA87EF000 0x00001000 0x00000000
Any ideas?!@?#
Last edited by mattlehrer on Fri Feb 23, 2007 14:47; edited 2 times in total
Posted: Fri Feb 23, 2007 9:45 Post subject: Re: HELP!
mattlehrer wrote:
I've gotten as far as attempting the TFTP of boot.fs. I know the tftp server is running as I can issue a tftp get from the command line on the same pc and it grabs the file.
I set the ip address on the fonera: ip_address 192.168.1.254/24 -h 192.168.1.166
I can ping from the fonera to my laptop from within RedBoot.
But everytime I try to TFTP the boot.fs over it says:
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> load -r -v -b 0x80041000 root.fs
Using default protocol (TFTP)
TFTP timed out 1/15
Can't load 'root.fs': operation timed out
No, windows firewall isn't on, no other apps blocking anything.
I can ping the fonera from my laptop so connectivity is definitely there.
my fis list output is here:
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0xA8000000 0xA8000000 0x00030000 0x00000000
FIS directory 0xA87E0000 0xA87E0000 0x0000F000 0x00000000
RedBoot config 0xA87EF000 0xA87EF000 0x00001000 0x00000000