Yes we have already ssh connection on the fonera.
We modify the firmware to had many tools like firewall admin and static dhcp.
Now we test to had a blacklist url system like the url and word blocking on the ddwrt.
But we have a problem, we don't know the webif language.
Do you know where we can find doc who explain webif ?
Yes we have already ssh connection on the fonera.
We modify the firmware to had many tools like firewall admin and static dhcp.
Now we test to had a blacklist url system like the url and word blocking on the ddwrt.
But we have a problem, we don't know the webif language.
Do you know where we can find doc who explain webif ?
did you get it working?
I'll probably get the parts for my wiggler cable on friday
Sorry for my late answer...
I am in a work now, so i dont have so much time...
But i already have a working kernel made from openwrt, that boots and mount root with a ramdisk .
I have the lan and wireless (madwifi) working.
Just go to the configs, and for La Fonera choose AP51, then in the madwifi configs choose AP51.
For dlink2100 choose ap43
Im working with Dlink2100 because it can boot from tftp...
The prob now is to put REDBOOT working...
this is a bit offtopic but...
Is it already possible (in the fonera) to bridge wlan and lan, disable dhcp, firewall and nat, set WPA or WPA2 for wireless? Basically I want to set the fonera in AP mode and use it to expand my wireless range, while it's connected using ethernet to my router. Is this already possible?
# This sript will brige your private WLAN and the LAN port
# The private signal will act like a normal AP
# Right now it doesn't work with WPA (only WEP/public will work)
Hmm any progress on enabling SSH without an Serial Connection, because
1. i dont want to crack up the la fonera case
and
2. i dont got any serial interface at my current pc
It isn't possible, you only can "install" signed .fon updates/patches, to sign them you need the private key from FON.
yo, but i bet there are several vulnerabilitys where a code execution is possible, dont know couldnt take a look at the webinterface because the hosted root image interprets the routers cgi bin as a real cgi bin