Engenius/Senao ESR750H

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices
Author Message
MikeBCT
DD-WRT Novice


Joined: 30 Jan 2013
Posts: 6

PostPosted: Wed Jan 30, 2013 17:01    Post subject: Engenius/Senao ESR750H Reply with quote
I am unable to find this router on the listing so I did some research to see if this is compatible.

Can anyone tell me if this is compatible with the DD-WRT firmware?

Thanks!

FCC ID: A8JESR750H
Industry Canada ID: 10103A-ESR750H
Power: 12 VDC, 1.25 A
Connector type: Barrel plug
CPU1: Ralink RT3883
FLA1: 16 MB (Macronix MX25L12835)
RAM1: 256 MB (Samsung K4B1G1646G-BCH9 x 2)
Expansion IF types: USB 2.0
USB ports: 1
WI1 chip1: Ralink RT5392
WI1 802dot11 protocols: bgn
WI1 MIMO status: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT3883
WI2 802dot11 protocols: an
WI2 MIMO status: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Ralink RT3883
Switch: Atheros AR8327
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Sun Feb 03, 2013 9:39    Post subject: Reply with quote
http://www.dd-wrt.com/site/support/router-detection
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
MikeBCT
DD-WRT Novice


Joined: 30 Jan 2013
Posts: 6

PostPosted: Mon Feb 04, 2013 15:33    Post subject: Reply with quote
Sash,

I am pretty sure that is all the information I posted above? I had already searched the forums for my model number and had no luck. I had gone to router detection and it was asking for chipset and ram information and that is what I posted above as well as FCC info and plenty more. Did I miss something else?

Here is the info again just in case.

FCC ID: A8JESR750H
Industry Canada ID: 10103A-ESR750H
Power: 12 VDC, 1.25 A
Connector type: Barrel plug
CPU1: Ralink RT3883
FLA1: 16 MB (Macronix MX25L12835)
RAM1: 256 MB (Samsung K4B1G1646G-BCH9 x 2)
Expansion IF types: USB 2.0
USB ports: 1
WI1 chip1: Ralink RT5392
WI1 802dot11 protocols: bgn
WI1 MIMO status: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT3883
WI2 802dot11 protocols: an
WI2 MIMO status: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Ralink RT3883
Switch: Atheros AR8327
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1
eoc2611p
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 23

PostPosted: Mon Feb 04, 2013 17:04    Post subject: Reply with quote
Hi MikeBCT,
according to this list, your device should be fine: http://www.dd-wrt.com/wiki/index.php/Known_incompatible_devices

as you probably already noticed, there are not many people giving out advices here...plus one which, ohh well, you saw it already Laughing
MikeBCT
DD-WRT Novice


Joined: 30 Jan 2013
Posts: 6

PostPosted: Mon Feb 04, 2013 17:22    Post subject: Reply with quote
SO because it is not listed on the incompatible list then it is compatible? and yes, I noticed Smile

thanks!
eoc2611p
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 23

PostPosted: Mon Feb 04, 2013 18:10    Post subject: Reply with quote
I know it's a kind of half victory, but at least leave you with some hope.
It seems that your device it's a fairly new machine, so it will take some times till all the info are available.
According from what i am reading around (http://www.smallnetbuilder.com/wireless/wireless-reviews/31842-engenius-esr750h-xtrarange-dual-band-wireless-n-router-reviewed), it's based on the Ralink RT3883F and this is listed on many devices on which you can install Open WRT (http://wiki.openwrt.org/toh/start), so DD WRT then should be fine.
MikeBCT
DD-WRT Novice


Joined: 30 Jan 2013
Posts: 6

PostPosted: Mon Feb 04, 2013 18:20    Post subject: Reply with quote
Excellent! Thank you!
MikeBCT
DD-WRT Novice


Joined: 30 Jan 2013
Posts: 6

PostPosted: Mon Feb 04, 2013 18:24    Post subject: Reply with quote
Now to figure out which version to install! LOL
eoc2611p
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 23

PostPosted: Mon Feb 04, 2013 18:47    Post subject: Reply with quote
Have a look at this too: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86305


Edit:

Try to send a private message to LOM, it's the same person which posted the interesting info on the previous link up here, plus he seems to be knowdgeable and even more importantly, elaborates in an intelligent manner his answers rather than tell you things as "read the guidelines".....and please if you find the right answer, post it here so everybody can benefit from it Wink
Good Luck!
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=167343


Last edited by eoc2611p on Mon Feb 04, 2013 18:59; edited 1 time in total
MikeBCT
DD-WRT Novice


Joined: 30 Jan 2013
Posts: 6

PostPosted: Mon Feb 04, 2013 18:52    Post subject: Reply with quote
Thank you! Will do!
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7631

PostPosted: Tue Feb 05, 2013 3:30    Post subject: Reply with quote
There is no dd-wrt supported router with the same hardware specs so there is no compatible dd-wrt firmware for you to use.
_________________
Kernel panic: Aiee, killing interrupt handler!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum