USR5451 - Maybe Bricked

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
fulmine
DD-WRT Novice


Joined: 01 Nov 2013
Posts: 3

PostPosted: Fri Nov 01, 2013 11:53    Post subject: USR5451 - Maybe Bricked Reply with quote
Hi all,
I've tried flashing via web interface ddwrtv24 micro.bin.
I don't know if I followed correctly the guide, but now the AP has a strange behaviour. I managed to get a serial connection to it and access to the CFE console. From there I erased the nvram (exit code=0).
The thing is that I'm not able to ping the device in any way. In the CFE console, eth0 has ip 192.168.1.1, but not even it pings correctly other IPs on the same network. I tried to tftp the stock firmware, but it is not working. Funny thing is, if I let it boot, it creates a wireless network with ESSID ddwrt, not protected, gives ip addresses to clients, but still it does not answer to ping requests. If I setup a DHCP server, the AP gets an address on the ethernet port (checked with wireshark), but, still, no ping.
Is there anything I can do to start using this AP again?
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum