Frage zu Alix 2d1 und wistron CM9

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 basierende Hardware
Author Message
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Fri Feb 27, 2009 13:46    Post subject: Frage zu Alix 2d1 und wistron CM9 Reply with quote
ich habe mir gerade die X86+Superchannel version für obiges Board bestellt. Welche Version muss ich jetzt nehmen:
-die web upgrade
oder die full-serial?
Vermute mal webupgrade nur dann, wenn schon was auf dem Board läuft, aber was?
Ich nehm am besten sie serial -oder?
Danke
Sponsor
Yanira
DD-WRT Novice


Joined: 08 Dec 2008
Posts: 40

PostPosted: Fri Feb 27, 2009 14:00    Post subject: Re: Frage zu Alix 2d1 und wistron CM9 Reply with quote
wolfgang wrote:
ich habe mir gerade die X86+Superchannel version für obiges Board bestellt.
Hättest die 20 Kröten besser zum Fenster rausgeworfen.
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Fri Feb 27, 2009 14:35    Post subject: Reply with quote
Evil or Very Mad soso und warum wenn man mal fragen darf?
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Feb 27, 2009 17:44    Post subject: Re: Frage zu Alix 2d1 und wistron CM9 Reply with quote
wolfgang wrote:
ich habe mir gerade die X86+Superchannel version für obiges Board bestellt. Welche Version muss ich jetzt nehmen:
-die web upgrade
oder die full-serial?
Vermute mal webupgrade nur dann, wenn schon was auf dem Board läuft, aber was?
Ich nehm am besten sie serial -oder?
Danke


deine ueberlegungen sind vollkommen richtig. achte darauf das das neueste bios installiert ist

@Yanira
also es zwingt dich keiner hier zu sein. un es stickt mir ein weinig dass das schon der 2. topic ist in dem du rumstaenkerst ohne was produktives zu sagen....
wenn du sw probleme hast poste sie oder lass stecken. bei den meisten leuten die solche comments bringen sind die probleme zwischen stuhl und tastatur.
wenn du monowall magst, bitte. ich finds auch ganz gut fuer bestimmte sachen. dann geh bitte zu denen ins board....da wirds dir besser gehn.

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Sat Feb 28, 2009 6:55    Post subject: Reply with quote
Danke, ich hab es installiert (BIOS vorher auf neueste Version geupdated).
Aber es stimmt einiges nicht. Das Ethernet kommt nicht hoch. Hier die Bootausgabe:

----
Booting 'DD-WRT'

root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/hda2 rootfstype=squashfs noinitrd console=ttyS0
,115200n8 reboot=bios
[Linux-bzImage, setup=0x2600, size=0x200c18]
boot
Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.2.1) #388 Sat Jul 26 11:27:
17 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
128MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32768
HighMem 32768 -> 32768
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 32768
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
Built 1 zonelists in Zone order. Total pages: 32512
Kernel command line: root=/dev/hda2 rootfstype=squashfs noinitrd console=ttyS0,1
15200n8 reboot=bios
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 431.648 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125136k/131072k available (2943k kernel code, 5528k reserved, 964k data,
188k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
.init : 0xc04d4000 - 0xc0503000 ( 188 kB)
.data : 0xc03dfe27 - 0xc04d10dc ( 964 kB)
.text : 0xc0100000 - 0xc03dfe27 (2943 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 864.62 BogoMIPS (lpj=1729242)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver 2.1.28 [Flags: R/W].
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Could not find Carillo Ranch MCH device.
Real Time Clock Driver v1.12ac
AMD Geode RNG detected
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
nbd: registered device at major 43
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
IMQ starting with 2 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbcore: registered new interface driver catc
drivers/net/usb/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
drivers/net/usb/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)

usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plusb
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: CF 4GB, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 7831152 sectors (4009 MB) w/1KiB Cache, CHS=7769/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
ide-floppy driver 0.99.newide
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:0f.2
pata_amd 0000:00:0f.2: failed to request/iomap BARs for port 0 (errno=-16)
scsi0 : pata_amd
scsi1 : pata_amd
ata1: DUMMY
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042.c: No controller found.
i2c /dev entries driver
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (now
ayout= 0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
stty: standard input: Input/output error
stty: standard input: Input/output error
ifconfig: SIOCSIFADDR: No such device

sh: cannot create /proc/sys/net/ipv4/tcp_westwood: nonexistent directory
sh: cannot create /proc/sys/net/ipv4/tcp_vegas_cong_avoid: nonexistent directory

sh: cannot create /proc/sys/net/ipv4/tcp_vegas_alpha: nonexistent directory
sh: cannot create /proc/sys/net/ipv4/tcp_vegas_beta: nonexistent directory
sorry, your unit does not support resetbutton feature

sh: cannot create /proc/sys/dev/wifi0/compression: nonexistent directory
set slottime to 8us
ath0
Interface doesn't accept private ioctl...
compression (8BE0): Invalid argument
Invalid command : scandisable
Interface doesn't accept private ioctl...
compression (8BE0): Invalid argument
set slottime to 16us
set acktimeout to 38us
set ctstimeout to 38us
Interface doesn't accept private ioctl...
compression (8BE0): Invalid argument
Invalid command : scandisable
killall: roaming_daemon: no process killed
ifconfig: ioctl 0x8914 failed: Cannot assign requested address
zebra disabled.
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
rmmod: ipt_TRIGGER: No such file or directory
rmmod: ipt_CONNMARK: No such file or directory
rmmod: xt_CONNMARK: No such file or directory
rmmod: ipt_IMQ: No such file or directory
rmmod: nf_nat_pptp: No such file or directory
rmmod: nf_conntrack_pptp: No such file or directory
rmmod: nf_nat_proto_gre: No such file or directory
rmmod: nf_conntrack_proto_gre: No such file or directory
Bad argument `5060'
rmmod: ebt_dnat: No such file or directory
rmmod: ebt_snat: No such file or directory
rmmod: ebt_mark_m: No such file or directory
rmmod: ebt_mark: No such file or directory
rmmod: ebtable_filter: No such file or directory
rmmod: ebtable_nat: No such file or directory
rmmod: ebtables: No such file or directory
rmmod: imq: No such file or directory
cp: cannot stat '/tmp/mycron.d/*': No such file or directory
cp: cannot stat '/jffs/mycron.d/*': No such file or directory
cp: cannot stat '/mmc/mycron.d/*': No such file or directory
Key is a RSA key
Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
Key is a DSS key
Wrote key to '/tmp/root/.ssh/ssh_host_dss_key'
ifconfig: ioctl 0x8913 failed: No such device
No such device
Bad argument `5060'
set slottime to 16us
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable
process_monitor..done
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
rmmod: ipt_TRIGGER: No such file or directory
rmmod: ipt_CONNMARK: No such file or directory
rmmod: xt_CONNMARK: No such file or directory
rmmod: ipt_IMQ: No such file or directory
Bad argument `5060'
rmmod: ebt_dnat: No such file or directory
rmmod: ebt_snat: No such file or directory
rmmod: ebt_mark_m: No such file or directory
rmmod: ebt_mark: No such file or directory
rmmod: ebtable_filter: No such file or directory
rmmod: ebtable_nat: No such file or directory
rmmod: ebtables: No such file or directory
rmmod: imq: No such file or directory
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
rmmod: ipt_TRIGGER: No such file or directory
rmmod: ipt_CONNMARK: No such file or directory
rmmod: xt_CONNMARK: No such file or directory
rmmod: ipt_IMQ: No such file or directory
Bad argument `5060'
rmmod: ebt_dnat: No such file or directory
rmmod: ebt_snat: No such file or directory
rmmod: ebt_mark_m: No such file or directory
rmmod: ebt_mark: No such file or directory
rmmod: ebtable_filter: No such file or directory
rmmod: ebtable_nat: No such file or directory
rmmod: ebtables: No such file or directory
rmmod: imq: No such file or directory
sh: /tmp/.rc_startup: not found
killall: shatd: no process killed
killall: proxywatchdog.sh: no process killed
killall: wdswatchdog.sh: no process killed
killall: schedulerb.sh: no process killed
umount: cannot umount /tmp/smbshare: No such file or directory
rmmod: cifs: No such file or directory
The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
Empty.
DD-WRT v24 std (c) 2008 NewMedia-NET GmbH
Release: 07/26/08 (SVN revision: 9994)

DD-WRT login:
---

Vielleicht kann es sich ja mal jemand ansehen.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sat Feb 28, 2009 9:59    Post subject: Reply with quote
du hast wlan zugriff?
dann flasch mal das 19.02.09 build
others>eko->bs pre sp2

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Sat Feb 28, 2009 12:16    Post subject: Reply with quote
ja wlan zugriff hab ich und hab die angegebene version übers webinterface geflasht. Ergebnis sieht genauso aus. Hab allerdings mittlerweile den Verdacht dass die Hardware nicht ok ist, das an allen drei interfaces immer die rechte obere grüne led an ist. Werd mal Montag nachfragen.
Hier nochmal der interessante Teil:
ifconfig: ioctl 0x8913 failed: No such device
No such device
Bad argument `5060'
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
Bad argument `5060'
rmmod: ebt_dnat: No such file or directory
rmmod: ebt_snat: No such file or directory
rmmod: ebt_mark_m: No such file or directory
rmmod: ebt_mark: No such file or directory
rmmod: ebtable_filter: No such file or directory
rmmod: ebtable_nat: No such file or directory
rmmod: ebtables: No such file or directory
rmmod: imq: No such file or directory
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
Bad argument `5060'
rmmod: ebt_dnat: No such file or directory
rmmod: ebt_snat: No such file or directory
rmmod: ebt_mark_m: No such file or directory
rmmod: ebt_mark: No such file or directory
rmmod: ebtable_filter: No such file or directory
rmmod: ebtable_nat: No such file or directory
rmmod: ebtables: No such file or directory
rmmod: imq: No such file or directory
sh: /tmp/.rc_startup: not found
umount: can't umount /tmp/smbshare: No such file or directory
rmmod: cifs: No such file or directory
killall: proxywatchdog.sh: no process killed
killall: shatd: no process killed
killall: wdswatchdog.sh: no process killed
killall: schedulerb.sh: no process killed
The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
Empty.
nvram was changed, needs commit, waiting 10 sec.
commit
nvram_commit: 4096 bytes written
nvram_commit(): end
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable

DD-WRT v24-sp2 std (c) 2009 NewMedia-NET GmbH
Release: 02/19/09 (SVN revision: 11659)
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Sat Feb 28, 2009 12:23    Post subject: Reply with quote
hab von PC-Engines schon Antwort (sehr kundenfreundlich! ): Very Happy
Via hat die LED as Power LED definiert. Die HW ist also ok. Was kann ich jetzt machen?
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sat Feb 28, 2009 18:42    Post subject: Reply with quote
wer hat denn geantwortet..pascal? ja die sind immer sehr nett.

aaalso. geh mal per seriell, telnet oder ssh auf die kiste, log dich ein und gib mir den output von

Code:
dmesg

und
Code:
ifconfig

sowie
Code:
lspci -v

ich glaub das is doch die neue revision. da hat sich vlt der lan chip geaendert. keep cool...das fixen wir schon

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Sat Feb 28, 2009 20:15    Post subject: Reply with quote
zunächst mal vielen Dank.
Ja Pascal hat geantwortet.
Hier die Ausgaben. ifconfig sieht eigendlich normal aus.

--------------
DMESG
-------------
root@DD-WRT:~# dmesg
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable

Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.2.1) #643 Thu Feb 19 10:54:
21 CET 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
128MB LOWMEM available.
Entering add_active_range(0, 0, 32768) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32768
HighMem 32768 -> 32768
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 32768
On node 0 totalpages: 32768
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 224 pages used for memmap
Normal zone: 28448 pages, LIFO batch:7
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
Built 1 zonelists in Zone order. Total pages: 32512
Kernel command line: root=/dev/hda2 rootfstype=squashfs noinitrd console=ttyS0,1
15200n8 reboot=bios
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 431.648 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125016k/131072k available (2976k kernel code, 5648k reserved, 971k data,
188k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
.init : 0xc04de000 - 0xc050d000 ( 188 kB)
.data : 0xc03e8187 - 0xc04db0dc ( 971 kB)
.text : 0xc0100000 - 0xc03e8187 (2976 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 864.62 BogoMIPS (lpj=1729248)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0088a93d c0c0a13d 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: After all inits, caps: 0088a93d c0c0a13d 00000000 00000000 00000000 0000000
0 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver 2.1.28 [Flags: R/W].
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
vmlfb: initializing
Could not find Carillo Ranch MCH device.
Real Time Clock Driver v1.12ac
AMD Geode RNG detected
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
nbd: registered device at major 43
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
IMQ starting with 2 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbcore: registered new interface driver catc
drivers/net/usb/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
drivers/net/usb/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)

usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plusb
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: SMI, ATA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 1957536 sectors (1002 MB) w/1KiB Cache, CHS=1942/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
ide-floppy driver 0.99.newide
pata_amd 0000:00:0f.2: version 0.3.9
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:0f.2
pata_amd 0000:00:0f.2: failed to request/iomap BARs for port 0 (errno=-16)
scsi0 : pata_amd
scsi1 : pata_amd
ata1: DUMMY
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
ata2: port disabled. ignoring.
PCI: Setting latency timer of device 0000:00:0f.5 to 64
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Setting latency timer of device 0000:00:0f.4 to 64
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042.c: No controller found.
i2c /dev entries driver
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (now
ayout= 0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ipt_random match loaded
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
PCI: Setting latency timer of device 0000:00:09.0 to 64
eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:16:9e:a4, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
eth1: VIA Rhine III (Management Adapter) at 0x11400, 00:0d:b9:16:9e:a5, IRQ 11.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
PCI: Setting latency timer of device 0000:00:0b.0 to 64
eth2: VIA Rhine III (Management Adapter) at 0x11800, 00:0d:b9:16:9e:a6, IRQ 12.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth0: link down
eth1: link down
eth2: link down
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 2008-10-02 (AR5210, AR5211, AR5212, AR5416, AR9160, AR9280, RF5111, RF5
112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, WRITE_EEPROM, XR)
ath_pci: svn r710S
wlan: svn r710S
wlan: mac acl policy registered
ath_rate_sample: 1.2 (svn r710S)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r710S)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
Mac Chip Rev 0x05.9 detected
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36
Mbps 48Mbps 54Mbps
wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
ath_pci: wifi0: Atheros 5212: mem=0xe00c0000, irq=9
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
device eth0 entered promiscuous mode
eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
device eth1 entered promiscuous mode
eth2: link down
ADDRCONF(NETDEV_UP): eth2: link is not ready
device eth2 entered promiscuous mode
set slottime to 16us
set acktimeout to 38us
set ctstimeout to 38us
device ath0 entered promiscuous mode
br0: port 4(ath0) entering learning state
set slottime to 16us
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: MII link monitoring set to 100 ms
br0: topology change detected, propagating
br0: port 4(ath0) entering forwarding state
device br0 entered promiscuous mode
etherip: Ethernet over IPv4 tunneling driver
br0: no IPv6 routers present
ath0: no IPv6 routers present

----------------------------------
IFCONFIG
---------------------

root@DD-WRT:~# ifconfig
ath0 Link encap:Ethernet HWaddr 00:0B:6B:DE:11:1E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:768 (768.0 B)

br0 Link encap:Ethernet HWaddr 00:0B:6B:DE:11:1E
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:468 (468.0 B)

br0:0 Link encap:Ethernet HWaddr 00:0B:6B:DE:11:1E
inet addr:169.254.255.1 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

eth0 Link encap:Ethernet HWaddr 00:0D:B9:16:9E:A4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:10 Base address:0x1000

eth1 Link encap:Ethernet HWaddr 00:0D:B9:16:9E:A5
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:11 Base address:0x1400

eth2 Link encap:Ethernet HWaddr 00:0D:B9:16:9E:A6
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:12 Base address:0x1800

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:696 (696.0 B) TX bytes:696 (696.0 B)

wifi0 Link encap:UNSPEC HWaddr 00-0B-6B-DE-11-1E-00-00-00-00-00-00-00-00-00
-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1444 errors:0 dropped:0 overruns:0 frame:536
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:395
RX bytes:416464 (406.7 KiB) TX bytes:1410 (1.3 KiB)
Interrupt:9
-------------------------
lspci -v
---------------------
root@DD-WRT:~# lspci -v
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host
Bridge (rev 33)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Br
idge
Flags: bus master, 66Mhz, medium devsel, latency 248
I/O ports at <ignored>

00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX A
ES Security Block
Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 9
Memory at efff4000 (32-bit, non-prefetchable) [size=16K]

00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)

Subsystem: VIA Technologies, Inc.: Unknown device 0106
Flags: bus master, stepping, medium devsel, latency 64, IRQ 10
I/O ports at 1000 [size=256]
Memory at e0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)

Subsystem: VIA Technologies, Inc.: Unknown device 0106
Flags: bus master, stepping, medium devsel, latency 64, IRQ 11
I/O ports at 1400 [size=256]
Memory at e0040000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)

Subsystem: VIA Technologies, Inc.: Unknown device 0106
Flags: bus master, stepping, medium devsel, latency 64, IRQ 12
I/O ports at 1800 [size=256]
Memory at e0080000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

00:0c.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprot
ocol MAC/baseband processor (rev 01)
Subsystem: Wistron NeWeb Corp. CM9 Wireless a/b/g MiniPCI Adapter
Flags: bus master, medium devsel, latency 96, IRQ 9
Memory at e00c0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2

00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (r
ev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
Flags: 66Mhz, medium devsel
I/O ports at 6000 [size=8]
I/O ports at 6100 [size=256]
I/O ports at 6200 [size=64]
I/O ports at <unassigned>
I/O ports at 9d00 [size=128]
I/O ports at 9c00 [size=64]

00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
(rev 01) (prog-if 80 [Master])
(rev 01) (prog-if 80 [Master])
Flags: bus master, 66Mhz, medium devsel, latency 248
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size
=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size
=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
I/O ports at ff00 [size=16]

00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OH
C (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 15
Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EH
C (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 15
Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
-----------------------------
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sun Mar 01, 2009 11:07    Post subject: Reply with quote
ok
das is der interessante part
Code:
eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:16:9e:a4, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
eth1: VIA Rhine III (Management Adapter) at 0x11400, 00:0d:b9:16:9e:a5, IRQ 11.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
PCI: Setting latency timer of device 0000:00:0b.0 to 64
eth2: VIA Rhine III (Management Adapter) at 0x11800, 00:0d:b9:16:9e:a6, IRQ 12.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth0: link down
eth1: link down
eth2: link down

das heisst der driver is geladen aber kein physical link da.
was fuer n kabel benutzt du. ich weiss das die alix manchmal pissig sind mit dem gegenueber (switch, hub, port). versuch mal cross kabel wenn du ein straight through benutzt bzw umgekehrt. stecks mal an ein anderes ethernet geraet.

wenn n link up ist beginnt die andere led des port zzu blinken...das is unabhaengig vom treiber. reines ethernet mac.
dann muss es gehn[/code]

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
wolfgang
DD-WRT Novice


Joined: 27 Feb 2009
Posts: 7

PostPosted: Sun Mar 01, 2009 14:01    Post subject: Reply with quote
In der Tat!!! Very Happy
Das neue Kabel (Blau aus der Linksys-Schachtel des WRT610N (nagelneu) geht nicht! Mit anderen Geräten geht es aber einwandfrei. Ein anderes Kabel genommen und es tut. Seltsam mit sowas bin zum ersten mal konfrontiert. An sowas denkt man ja gar nicht. Irgendwelche Produkttoleranzen müssen hier an der Grenze sein. Auf jeden Fall tut es jetzt.
Also vielen Dank -ich wär so schnell nicht auf so was gekommen, obwohl mein Verdacht schon in die Richtung Hardware ging. Man denkt manchmal zu komliziert.
Ich werd das Teil jetzt mal genauer testen.
Schönes Wochende
Wolfgang
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum