Author
Message
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Sun Feb 22, 2009 22:12 Post subject: EOC-1650
Hi,
have someone used dd-wrt with EOC-1650?
should be a good alternative of picostation2
Enrico
Back to top
Sponsor
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Fri Feb 27, 2009 10:32 Post subject:
good news for dd-wrt on EOC-1650.
i have installed but have some trouble to use it with
chillispot.
the wan interface don't take address from dhcp server.
Enrico
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
BrainSlayer Site Admin Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Fri Feb 27, 2009 18:06 Post subject:
we tested the EOC1650. it works. just enable wan, if ap mode is enabled and it gets its ip from your dhcp server _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Sun Mar 01, 2009 2:46 Post subject:
i always have the same problem.
from scratch i set "Automatic Configuration DHCP"
on wan setup. it seems ok because i see address on
WAN IP from web interface but when i reboot WAN IP is 0.0.0.0
Enrico
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Sun Mar 01, 2009 13:16 Post subject:
i think thereis a problem with wan ip.
also if set wan ip with static address the interface don't work
i enter via wlan and i can't ping with a device with the same subnet.
this is my ifconfig -a :
ifconfig -a
ath0 Link encap:Ethernet HWaddr 00:02:6F:57:5C:1E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4008 errors:0 dropped:0 overruns:0 frame:0
TX packets:2053 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:317852 (310.4 KiB) TX bytes:1291683 (1.2 MiB)
br0 Link encap:Ethernet HWaddr 00:02:6F:57:5C:1E
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3946 errors:0 dropped:0 overruns:0 frame:0
TX packets:4393 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:301710 (294.6 KiB) TX bytes:3537314 (3.3 MiB)
eth0 Link encap:Ethernet HWaddr 00:02:6F:57:5C:1F
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1027 errors:0 dropped:0 overruns:0 frame:0
TX packets:348 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:139981 (136.7 KiB) TX bytes:25575 (24.9 KiB)
Interrupt:4 Base address:0x1000
eth0:0 Link encap:Ethernet HWaddr 00:02:6F:57:5C:1F
inet addr:169.254.255.1 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:4 Base address:0x1000
etherip0 Link encap:Ethernet HWaddr 7A:A9:21:AB:21:DA
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
gre0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:300 errors:0 dropped:0 overruns:0 frame:0
TX packets:300 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32152 (31.3 KiB) TX bytes:32152 (31.3 KiB)
teql0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tunl0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wifi0 Link encap:UNSPEC HWaddr 00-02-6F-57-5C-1E-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4257 errors:0 dropped:0 overruns:0 frame:574
TX packets:4949 errors:9 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:395
RX bytes:462670 (451.8 KiB) TX bytes:3715427 (3.5 MiB)
Interrupt:3 Memory:b0000000-b00ffffc
ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
arp -na
? (192.168.1.2) at <incomplete> on eth0
? (192.168.10.12) at 00:13:E8:F1:A1:3F [ether] on br0
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Sun Mar 01, 2009 18:58 Post subject:
hope that this informations are usefull:
i would like to configure EOC-1650 with chillispot.
my ns2 works very good with chillispot.
it is the difference with my ns2 configurated (and working):
the current bridging table on ns2 br0 have ath0 as interface and in port setup
the wan port assigment is on eth0.
with this configuration WAN IP on EOC-1650 don't work and wan ip don't receive
ip address from dhcp server.
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Thu Mar 05, 2009 1:06 Post subject:
on my EOC-1650 i have problem with chillispot.
i have installed V24 sp2.
on my ns2 i have installed v24 sp1 and chillispot works well.
can i install v24 sp1 on my EOC-1650 ?
thankyou
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Wed Mar 11, 2009 17:47 Post subject:
Hi Sash
the problem is:
from scratch configuration
Basic Setup
1) set wan connection type to: Automatic
2) disable DHCP server
3) router IP to 192.168.10.1
Security
1) SPI Firewall : Disable
reboot
wan ip is set correctly.
configure chillispot (i use the same configuration on other AP and it's working)
and when reboot wan ip is 0.0.0.0
Enrico
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
enrico1301 DD-WRT Novice Joined: 16 Jun 2006 Posts: 44
Posted: Thu Mar 12, 2009 10:17 Post subject:
i have tested with ip static on wan.
the same problem.
also ping to wan ip address failed.
Back to top