EOC-2610 Radio Problem Connection On and Off (WDS) Mode

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Goto page 1, 2, 3  Next
Author Message
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Thu Feb 19, 2009 14:24    Post subject: EOC-2610 Radio Problem Connection On and Off (WDS) Mode Reply with quote
I just flash this EOC-2610 and purchased the activation key . The problem is It's link into WDS to another LinksysGL V24SP2 Special Edition and it's using channel 1 from 14 all got problem the wifi will on and off and it's not stable when link via WDS

I'm using SP2 version for the v24sp2 12/18/08 released. Is there any problem with it? With WDS it will loss signal on and off . Please clarify this.

Without the WDS AP mode via cable with same settings the signal is stable.

How can i revert back to SP1? Maybe SP1 is stable have to use back the bootloader tricks or just use the WEB GUI Interface?

Still trying to change channel from 1 to 7 and still having the same problem with it.

TQVM
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Feb 20, 2009 7:39    Post subject: Reply with quote
just reflash sp1 webflash file via web-if.

wiki:wds

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Fri Feb 20, 2009 8:43    Post subject: Reflash Failed Reply with quote
Sash wrote:
just reflash sp1 webflash file via web-if.

wiki:wds


I have try to reflash and it doesn't work at all, try the web based and red boot both are not working ;'-(

Kindly please help me

Firmware: DD-WRT v24-sp2 (12/18/0Cool std
Time: 00:38:35 up 38 min, load average: 0.16, 0.10, 0.16
WAN: Disabled

Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Feb 20, 2009 20:47    Post subject: Reply with quote
sorry but redboot MUST work.
either the tftp recovery.
read the stickys
anyway the webflash is the way to go.

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Tue Feb 24, 2009 0:36    Post subject: Links for SP1 Reply with quote
Sash wrote:
sorry but redboot MUST work.
either the tftp recovery.
read the stickys
anyway the webflash is the way to go.


Hi there bro can you pls redirect me the correct link for sp1 stable version?

I manage to flash the 6MB firmware but it's SP2 the . Still got problem with the radio.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Tue Feb 24, 2009 19:32    Post subject: Reply with quote
there is no real sp1 cause we added support in october or so.
have installed the latest build now?
what wifi problems do u have?

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Wed Feb 25, 2009 4:41    Post subject: Problem FIX Reply with quote
Sash wrote:
there is no real sp1 cause we added support in october or so.
have installed the latest build now?
what wifi problems do u have?


The sp2 4MB firmware got problem. The radio showing running super G once 1 min got 54Mbps and another one is running at 150Mbps. On and off then disconnect.

So i have flash 2 EOC-2610 with the sp2 6MB firmware and it's running 24/7 stable rite now.

I figure out something while playing with it

You need to wait about 30 seconds before turning it on.Otherwise the Radio won't start properly.

Now i just need to figure out the correct settings for EXT Antenna not sure firmware bug or TX and RX settings correct or not. Because i already tried with Diversity, Primary and Secondary.

If you have the settings kindly pls advised
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Wed Feb 25, 2009 17:11    Post subject: Reply with quote
super g is only working in newer sp2 builds cause of stange sw/hw problems.
for the external antenna i will ask BS

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Wed Feb 25, 2009 18:48    Post subject: Reply with quote
for external antenna usage you must switch to secondary and you must also turn the small switch beside the antenna connector.
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Fri Feb 27, 2009 16:29    Post subject: EXT- Antenna Usage Reply with quote
BrainSlayer wrote:
for external antenna usage you must switch to secondary and you must also turn the small switch beside the antenna connector.


It doesn't show any improvement with the settings it's looks like the directional antenna is working but the ext connect to 8dbi and 12dbi omni just producing the same results we do try with shorter sma cable.

Got firmware glitch on these?

Here few screenshots correct me if i made any settings wrong here

I try many settings here nothing improvement

Like extended range and etc

I try to change the transmit power to 27dbm m 28dbm and even 30dbm it still shows at 25dbm

Please refer to screenshots
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Fri Feb 27, 2009 17:00    Post subject: More screenshots Reply with quote
Here more screenshots

Comparison between Linksys GL running at 125mW and Senao 600mW
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Feb 27, 2009 17:39    Post subject: Reply with quote
1st think of the reg dom USA and the max allowed eirp. then the anennas gain is subtracted from the set tx power.

1st set antenna gain = 0 and check the max output power

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Fri Feb 27, 2009 23:18    Post subject: Reply with quote
Sash wrote:
1st think of the reg dom USA and the max allowed eirp. then the anennas gain is subtracted from the set tx power.

1st set antenna gain = 0 and check the max output power


Hi there tq for ur reply pls suggest me the name the country which i can go the up to 600mW.So many country to choose, don't want to test one by one. I hope dd-wrt doesn't limit the transmit power in the Country selection.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sat Feb 28, 2009 0:39    Post subject: Reply with quote
Sash wrote:
1st set antenna gain = 0 and check the max output power

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
darknforce
DD-WRT Novice


Joined: 15 Jun 2006
Posts: 40

PostPosted: Sat Feb 28, 2009 7:57    Post subject: Reply with quote
Sash wrote:
Sash wrote:
1st set antenna gain = 0 and check the max output power


Hi there i did what u said the value is still 25dbm doesn't change anything signal gain through the netstumbler also the same
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum