[DDMan]

Alrighty, my issue is that I have a WRT54G-TM setup with DDWRT on it, acting as a repeater. The repeater connects to the main router fine, gets an IP, and DHCP works fine on the repeater (Both wired and wireless clients get an IP). The wired clients can connect to both the host router and anywhere on the internet fine. The WIRELESS clients connect to the repeater fine, but cannot get anywhere past it. On the wireless clients I can connect to the Repeater and log into the web interface without an issue, and can even ping the internet using the router's command line. SO.....

I searched and found a few threads which had a very similar issue to what I have, but none of their solutions fixed my problem, so I will start with my basics/net setup.

Router/Gateway:
WRT54G (Stock Linksys Firmware)
192.168.1.1

Repeater (NOT Repeater Bridge):
WRT54G-TM Flashed with V24 SP1 - Mega
10.1.136.1

I have NO security on the setup right now (as I'm just trying to get it working).

I have already read these threads with no resolution:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=43047
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=42738
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=40817

http://www.wi-fiplanet.com/tutorials/article.php/3655041
I also read through this to see if anything I am doing was different, and aside from setting a static IP for one of the wireless clients (which I have sense disabled for troubleshooting), hiding the Virtual AP, and not using their router IP number, everything is the same.

So...any help would be definitely appreciated to help figure out where I am going wrong. Let me know if you need any additional information. And yes, I do want to be using repeater mode, not repeater bridge.

Thanks to anyone willing to help!