[enrico1301]

Hi,
i have buyed and installed the last versione of dd-wrt on ns2,like to use ns2 as hotspot with chillispot.
in the past i have configurated buffalo ap as hotspot without problems.

how can configure the ethernet interface to be the wan interface and not lan interface
when enable wan interface via web i can't reach ns2

Thx
Enrico

[Sash]

then u must configure via wlan...since it has only 1 ethernet port

[enrico1301]

Hi Sash
i try via wlan but it's impossible to set wan interfaces using web interfaces.
i try to set as ip static and dhcp client.

an other strange thing, ns2 is slow and idle is always near 0 without work.

root@DD-WRT:~# cat /proc/loadavg
2.15 1.82 1.25 3/26 1924


Mem: 12224K used, 960K free, 0K shrd, 1248K buff, 4756K cached
CPU: 0.7% usr 1.6% sys 0.0% nice 0.0% idle 0.0% io 88.6% irq 8.9% softir
Load average: 2.78 1.68 1.04
PID PPID USER STAT VSZ %MEM %CPU COMMAND
1749 1728 root R 1312 9.9 14.3 top
212 1 root S 3700 28.0 13.9 httpd -p 80
1698 1 root R 2400 18.1 6.3 /sbin/check_ps
1226 1 root S 1312 9.9 4.7 /usr/sbin/telnetd
87 1 root S 2404 18.1 4.6 resetbutton
1758 1 root S 2368 17.9 0.9 /sbin/check_ps
9 2 root SW< 0 0.0 0.6 [kswapd0]
4 2 root SW< 0 0.0 0.3 [events/0]
24 1 root S 2432 18.4 0.0 /sbin/watchdog
8 2 root SW 0 0.0 0.0 [pdflush]
601 1 root S 2432 18.4 0.0 /sbin/wland
1 0 root S 2408 18.2 0.0 /sbin/init noinitrd
364 1 root S 2400 18.1 0.0 process_monitor
1764 1758 root R 2396 18.1 0.0 stopservice upnp
1728 1226 root S 1328 10.0 0.0 -sh
1598 1 root S 1312 9.9 0.0 /sbin/syslogd -R www.mylogserver.com
1600 1 root S 1308 9.9 0.0 /sbin/klogd
1214 1 root S 1092 8.2 0.0 dnsmasq --conf-file=/tmp/dnsmasq.conf

[Sash]

have u installed the latest pre sp2?

[enrico1301]

Firmware: DD-WRT v24-sp1 (07/26/0 std