I got dd-wrt working on my NA WGR614v8, and it's working flawlessly. I did notice, however that there are 2 versions of the WGR614 v8 out, mine has a 125Mhz Rev. 1 Broadcom CPU.
I got dd-wrt working on my NA WGR614v8, and it's working flawlessly. I did notice, however that there are 2 versions of the WGR614 v8 out, mine has a 125Mhz Rev. 1 Broadcom CPU.
Hi, i guess it's just cpu detection problem. Please give me:
Code:
cat /proc/cpuinfo
and
Code:
nvram show|grep freq
Mine looks like this:
Code:
root@WGR614L:~# cat /proc/cpuinfo
system type : Broadcom BCM5354 chip rev 2
processor : 0
cpu model : BCM3302 V2.9
BogoMIPS : 239.20
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
root@WGR614L:~# nvram show|grep freq
xtalfreq=25000
clkfreq=240
size: 19296 bytes (13472 left)
root@WGR614L:~#
Here is the output from the commands, as Eko requested.
Code:
root@DD-WRT:~# cat /proc/cpuinfo
system type : Broadcom BCM5354 chip rev 1
processor : 0
cpu model : BCM3302 V2.9
BogoMIPS : 239.20
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
root@DD-WRT:~# nvram show|grep freq
xtalfreq=25000
size: 28647 bytes (4121 left)
Also, is anyone working on the problem with IPKG and v24? I'm really tired of having to tinker with commands until I get it working correctly.
Code:
root@DD-WRT:~# ipkg update
root@DD-WRT:~# ipkg list
ERROR: File not found: /jffs/usr/lib/ipkg/lists/whiterussian
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/non-free
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/backports
You probably want to run `ipkg update'