Can i install on this Netcore 2105NR

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
yessirsir
DD-WRT Novice


Joined: 18 Sep 2008
Posts: 7

PostPosted: Fri Sep 19, 2008 2:59    Post subject: Can i install on this Netcore 2105NR Reply with quote
Hi, my friend just showed me how he uses dd-wrt and i thought its awesome so i too would hope i could install this on my router.

I dont have the best cam so i did my best to take the best pic as possible so here:

netcoretek 2105NR



* Complies with the IEEE802.3 and IEEE802.3u standards
* One 10M/100M auto-negotiation WAN port allows you to connect the Router with Cable/DSL modem or other Ethernet devices, such as router, switch, hub, etc
* Built-in 4-port 10/100Mbps auto-negotiation Fast Ethernet switch
* Supports different Internet connecting modes: PPPoE, DHCP Client and Static IP
* All ports support auto MDI/MDIX function which allows you to connect the devices with the Router by either parallel or cross-over Ethernet cables
* Supports UPnP, Windows XP can find the Router in the network automatically
* Built-in NAT (Network Address Transfer) technology acts as a firewall to protect internal sources against outside hackers
* Simple, intelligent, web-based management and configuration interface
* Supports Proxy DNS
* Supports DHCP server, all networked computers can retrieve TCP/IP settings automatically from the Router
* Supports virtual server which makes LAN services (such as FTP, WWW, TELNET, DNS, etc) to be accessible to the Internet users
* LED indicators for simple diagnostics and management

* Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
* Network Media: 10BASE –T: UTP Cat. 3 or up, 100BASE-TX: UTP Cat. 5 or up
* Management Interface: web-based
* NAT Table Entries: 65535
* Average Latency: <=300 µs
* Interface Speed: WAN: 10/100Mbps auto-negotiation, LAN: 10/100Mbps auto-negotiation
* LED Indicators: Power, CPU, Link/Activity
* Temperature : 0° to 50° C (operating), -40° to 70° C (storage)
* Humidity: 20% to 95 % non-condensing (operating), 20% to 95% non-condensing (storage)
* Dimension: 159mm (L)*100mm(W)*28mm(H)
* Weight: 350g
* Power: DC 9V, 1A, 5W
* Certifications: FCC Part 15 Class A, CE

Thanks for your help
Sponsor
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Fri Sep 19, 2008 4:51    Post subject: Reply with quote
Marvell chip = not supported.
yessirsir
DD-WRT Novice


Joined: 18 Sep 2008
Posts: 7

PostPosted: Sat Sep 20, 2008 3:01    Post subject: Reply with quote
awww alright, shopping time . :)

Thanx
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum