USB on BCM5354 routers - need testers

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6  Next
Author Message
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Wed Jul 23, 2008 5:32    Post subject: USB on BCM5354 routers - need testers Reply with quote
Looking for tester to test if my latest fix fixes the problem with USB on BCM5354 based routers (Asus wl500GP v2, wl520GU.... )
Sponsor
Bird333
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 809

PostPosted: Wed Jul 23, 2008 5:51    Post subject: Reply with quote
Are you also working on the USB2 'illegal capability' problem?
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Wed Jul 23, 2008 5:53    Post subject: Reply with quote
Which router? Anyway, only if you try we will know.
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Wed Jul 23, 2008 6:17    Post subject: Reply with quote
Well, try this


dd-wrt.v24-9973_NEWD_mini_usb.bin
 Description:

Download
 Filename:  dd-wrt.v24-9973_NEWD_mini_usb.bin
 Filesize:  2.93 MB
 Downloaded:  2372 Time(s)

drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Wed Jul 23, 2008 7:19    Post subject: Reply with quote
well i have a dir-320 with that chipset and having troubles getting usb 2.0 modules to work , only usb 1.1
works.

i download and flash my router with this new firmware...
at the first time it load the modules with no dalay or lag
i try mouting and work perfect
i try a hdparm -tT and then some times work , and others just the external 2.5" usb HD get stuck (red light)

something still wrong ...
i hope you can fix it

P.D. when hdparm work i get 137 mb / 36 mb ratings !!
Super!
drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Wed Jul 23, 2008 7:23    Post subject: Reply with quote
by the way
SSH Secure Shell 3.2.9 (Build 283)
Copyright (c) 2000-2003 SSH Communications Security Corp - http://www.ssh.com/

This copy of SSH Secure Shell is a non-commercial version.
This version does not include PKI and PKCS #11 functionality.


DD-WRT v24 mini (c) 2008 NewMedia-NET GmbH
Release: 07/23/08 (SVN revision: 9973)

==========================================================

____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24
http://www.dd-wrt.com

==========================================================


BusyBox v1.11.1 (2008-07-23 08:03:49 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@DD-WRT:~# dmesg
CPU revision is: 00029029
Linux version 2.4.36 (bin@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #907 Wed Jul 23 08:05:52 CEST 2008
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 239.20 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x20c0f7
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x00121800-0x00330000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00330000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:03.1 to 64
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:03.1: illegal capability!
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Journalled Block Device driver loaded
hub.c: new USB device 00:03.1-1, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: WDC WD12 Model: 00BEVS-00UST0 Rev:
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Warning: DQ5 raised while program operation was in progress, however operation completed OK
Warning: DQ5 raised while program operation was in progress, however operation completed OK
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to 00 90 4c c0 00 02.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
Warning: DQ5 raised while program operation was in progress, however operation completed OK
drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Wed Jul 23, 2008 13:25    Post subject: Reply with quote
by the way ... can you get rid of some useless stuff like some languages,styles or some hotspot utillities?

i was trying later and a trick than i found was than when i clean the jffs2 (using web option) the driver was loaded faster but when i acces the HD get stuck and and the router get rebooted
Bird333
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 809

PostPosted: Wed Jul 23, 2008 13:39    Post subject: Reply with quote
Eko wrote:
Well, try this


Will this work for WRT350N? It looks like 'drbios' is also have the 'illegal capability!' problem too.
Lextor
DD-WRT Novice


Joined: 02 Dec 2006
Posts: 19

PostPosted: Wed Jul 23, 2008 14:56    Post subject: Reply with quote
USB not working on my Asus WL500gP V2.

enabled all USB(except UHCI, OHCI alternate enabled)

Detected my 256MB flash drive with no problem(ext2 formated)
When using OHCI,issue df -h after deleting a file,auto rebooted with drive read error -71

When using EHCI same issue, but when auto rebooted flash drive detected with no error and able to use but auto rebooted when access drive.

_________________
WRT54GL V1.1 = 64MB ram,8MB flash,1GB 50X SD card,DD-WRT v24Mega SP1,2x Biquad,2x Serial port,Jtag, 12V 10mm fan,power on/off switch = MOD
====================================
Asus WL-500W = 128MB ram
drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Fri Jul 25, 2008 19:40    Post subject: Reply with quote
any news about this predicament EkO?
repsons
DD-WRT Novice


Joined: 16 Apr 2007
Posts: 42

PostPosted: Sat Jul 26, 2008 11:57    Post subject: Reply with quote
Hi!

What build do you use, is it
http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/V24_TNG/svn9973/dd-wrt.v24-9973_NEWD_mini_usb.bin
2.9 MB 24-07-08

I have older one (dd-wrt.v24-9517_NEWD_mini_usb.bin), is it worth to reflash with this v24-9973_NEWD ?

kind regards,
Janis
drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Sat Jul 26, 2008 13:50    Post subject: Reply with quote
i guess i the same ... a TNG version

BTW... in the TNG version is posible do the load balancing easylly?
repsons
DD-WRT Novice


Joined: 16 Apr 2007
Posts: 42

PostPosted: Sat Jul 26, 2008 14:52    Post subject: Reply with quote
What kind of 'load balancing' you mean with this?
-QoS packet sheduler priorities?
-or between 2WAN ports/?

1-th here is; and works! 2-nd -I really don't know.

Janis
drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Sun Jul 27, 2008 2:04    Post subject: Reply with quote
i mean combine 2 or more wan conections
repsons
DD-WRT Novice


Joined: 16 Apr 2007
Posts: 42

PostPosted: Sun Jul 27, 2008 11:23    Post subject: Reply with quote
I have read about 2WANs in openwrt-kamikadze wiki.

I understand, that here are 2 possibilities:
a) 2 static routes;
b) real 'load balancing', that is more complicated.

-j.
Goto page 1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 1 of 6
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum