Posted: Wed Sep 16, 2026 3:08 Post subject: New Build - 09/15/2026 - r66203
Welcome to MediaTek r66203 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Fri Sep 18, 2026 14:51 Post subject: since 65876 flashing of the Dlink DIR-882 A1 is impossible
Router/Version: Dlink DIR-882 A1
File/Kernel: Linux 6.12.101 #1582 SMP Wed Aug 5 04:10:37 +06 2026 mips
Previous/Reset: DD-WRT v3.0-r65876 std (08/05/26) / No
Mode/Status: Router / AP
Issues/Errors: After a few seconds of flashing, the router reboots and starts up with the old version
@kernel-panic69 suspects the new firmware is too big for the DIR-882
- what i can do to help resolving the issue? can you give me some instructions?
- is it possible to shrink the new builds to a size which is tolerated by the Dlink DIR-882 A1?
- doesn't your team have a Dlink DIR-882 A1 unit where you can experiment on? I have 2 routers and they experience the same issue.
Joined: 08 May 2018 Posts: 17506 Location: Texas, USA
Posted: Fri Sep 18, 2026 16:04 Post subject:
The options after enabling debug logging using`nvram set console debug=1` via telnet / ssh are:
Capturing a `tail -f /var/log/messages` via PuTTY while flashing via webUI while logged in via telnet / ssh.
Flashing via CLI
Capturing serial console log output via PuTTY while flashing via webUI.
This device does not have a pre-installed serial header, so it would require installation of one or some kind of workaround to connect the USB-UART TTL 3.3v phase shifting adapter.
The options after enabling debug logging using`nvram set console debug=1` via telnet / ssh are:
Capturing a `tail -f /var/log/messages` via PuTTY while flashing via webUI while logged in via telnet / ssh.
Flashing via CLI
Capturing serial console log output via PuTTY while flashing via webUI.
This device does not have a pre-installed serial header, so it would require installation of one or some kind of workaround to connect the USB-UART TTL 3.3v phase shifting adapter.
Joined: 08 May 2018 Posts: 17506 Location: Texas, USA
Posted: Sun Sep 20, 2026 12:39 Post subject:
Thanks for the confirmation. It should tell you that the file is too big to flash, but I think that is enough information. I've forwarded this to BrainSlayer.
EDIT/UPDATE 09.21.26: Should be fixed in the next release!