[blkt]

Welcome to Atheros r63093 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r63020 (mirror)

• OpenVPN 2.6.15: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104 r62157
r62170 r62192 r62240 r62268 r62324 r62365 r62374 r62418 r62460 r62508 r62540 r62606 r62778 r62890 r62966 r63020
r63093
• r60771-r63093 migrates IPQ806x from swconfig to DSA however VLAN configurations will not; no more Switch Config tab.
• IPQ806x: Asrock G10, Linksys EA8500, Netgear R7500, R7500v2, R7800, XR500 (XR450) & Trendnet TEW-827DRU v1.0R.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[Molle]

Router/Version: Netgear R7800 (main gateway)
Previous/Reset: r62966 (CLI update) / No
Status: NOK
Issues/Errors: Both wireless radios are shown as working in UI. Devices don't see them. Rolled back to r62966.

- 5 GHz (DD-WRT): WDS AP, AC/N Mixed, 160 MHz
- 2.4 GHz (DD-WRT): AP, N/G Mixed, Wide (40 MHz)
- Features: IPv4, DHCP Server, DNSMasq, Static Leases, Bridged VAP on 5 GHz, NTP Client, SFE

[matjazk]

Router/Version: Linksys MR7500
File/Kernel: DD-WRT v3.0-r63093 std (12/16/25) / Linux 6.6.119-rt29 #4823 SMP Mon Dec 15 20:37:07 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r63020 std (12/10/25) / No
Mode/Status: WAP, VLANs, SSH
Issues/Errors: Upgraded OK (Web interface). USB flash drive works, partitions are mounted automatically. Selecting Panama as domain still breaks all radios: Busy Time 0 ms, Active Time 0 ms, devices do not see any SSID.
Notes: Free/available memory has doubled since the last build, it now hovers around 150 MB, quite similar to XR500 with the same configuration (180 MB).

[Be Inspired]

Hello to all,

Update,

First attempt: C7 v5, upgraded from r63020 without reset and had the wireless problem.
Rolled back to r63020 and problem solved.

Second attempt: 1043 v2, upgraded from r63020 without reset and had no problem.

Thank you very much BS and devs.

[matjazk]

Router/Version: Linksys MX8500
File/Kernel: DD-WRT v3.0-r63020 std (12/10/25) / Linux 6.6.119-rt29 #4766 SMP Wed Dec 10 04:07:37 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r62966 std (12/06/25)
Mode/Status: WAP
Issues/Errors: 5 GHz radio does not work. It shows power, busy and active time, however devices do not see its SSID. Reboot did not help. Looks like the same problem as with r63020.
Notes: Went back to r62996, the last version with working 5 GHz radio on MX8500.

[Jovan]

Router Model: TP-Link TL-WR841ND v11
Firmware Version: DD-WRT v3.0-r63093 std (12/16/25)
Kernel Version: Linux 3.18.140-d6 #254661 Tue Dec 16 10:57:40 +07 2025 mips
Previous/Reset: Upgrade via CLI from r63020, Reset=yes
Mode/Status: Working OK as AP, NG mixed, HT40
Issues/Errors: None, in fact better than usual bufferbloat score at the first test.

Many thanks BS!

[ArjenR49]

[KACTET]

Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r63093 / Linux 3.18.140-d6 #254661 Tue Dec 16 10:57:40 +07 2025 mips
Previous/Reset: r63020 / no
Mode/Status: AP wired and wireless / Up and running for 3:08
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.
Incorrect rate of wlan0 - 800 Mbit/s!

Thank you BS and gurus!

[ian5142]

I set up two Netgear R7800 in 5GHz mesh mode (802.11s).
They worked fine under r63020 but the wireless radios didn't come up correctly under r63093. The lights come on, the radio says active in the GUI but it never lists a channel or power output.

Downgrading to r63020 without a reset worked fine.

[Per Yngve Berg]

R7800: No wifi

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r63093) / Linux 6.1.159-rt28 #710 SMP Tue Dec 16 06:46:51 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r63020 std (12/10/25) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz Mixed 20MHz, WPA2/WPA3-Personal, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, SuperSpeed USB Storage (guide by egc), WireGuard server (for mobile & site-to-site peer), Cron / partially working
Issues/Errors: Ethernet is ok but no WiFi. Reverted to r63020.

[jrscs]

Router/Version: Linksys MX4300 (Primary)
Firmware: DD-WRT v3.0-r63093 std (12/16/25)
Kernel: Linux 6.6.119-rt29 #4825 SMP Tue Dec 16 09:30:43 +07 2025 aarch64
Previous: DD-WRT v3.0-r63020 std (12/10/25)
Update Method: WebGUI
Mode/Status: Gateway/Ok
Reset: No
Setup:
WAN Connection Type: Static IP
Shortcut Forwarding Engine: NSS-ECM, QoS: Disable
Mesh Network, Bridging, & Vlan
Wlan0, Mesh/802.11s 5.0 GHz AX-only 80 GHz WPA3
Wlan1, AP 2.4 GHz N/G Mixed 20 GHz WPA2
Wlan1.1, VAP 2.4 Guest Network
Wlan2, AP 5.0 GHz AX/AC/N Mixed 80 GHz WPA2
Domain United States: txpower wlan0 - 25 dBm, wlan1 - 27 dBm, wlan2 - 28 dBm
IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding
USB 3.2 Gen 1 (USB 3.0) Seagate One Touch 2TB STKB2000400 (exFAT), NAS, Samba (Restricted User/Password)
NTP Client, Wireguard Server, Wake-on-WAN (Internet), SSH (public key), DDNS (dynu.com)
Issues/Errors: None/Ok

Up 48+ hours…

Router/Version: Linksys MX4300 (Node)
Firmware: DD-WRT v3.0-r63093 std (12/16/25)
Setup:
WAN Connection Type: Disabled
Mesh Network, Bridging, & Vlan
Shortcut Forwarding Engine: NSS-ECM, QoS Disable
Wlan0, Mesh/802.11s 5.0 GHz AX-only 80 GHz WPA3
Wlan1, AP 2.4 GHz N/G Mixed 20 GHz WPA2
Wlan1.1, VAP 2.4 Guest Network
Wlan2, AP 5.0 GHz AX/AC/N Mixed 80 GHz WPA2
Issues/Errors: None/Ok

Thanks BrainSlayer

[OneDumDuk]

Router/Version: Linksys EA8300
File/Kernel: dd-wrt-ea8300-webflash-r63093.bin / Linux 4.9.337 #3541 SMP Tue Dec 16 06:23:06 +07 2025 armv7l
Previous/Reset: 63020 with no reset
Mode/Status: Wired Access Point, No DHCP, No DNS, No WAN, No USB, Just WiFi.
Issues/Errors: GUI reports wlan0, wlan1, wlan2 as active on unknown channel and 0dBm transmit power. In the wireless status the SSID is missing.

All three radios are not transmitting. I have a fm radio nearby that gets interference from the router near certain stations. With this build I was not able to find the interference from the router. Rolled back to r63020 and all three radios are working normally.

Attached DMESG, MESSAGES, and a screen clip of wireless status page for wlan0.
Lots of EPROM and error messages throughout the logs.