[blkt]

Welcome to Marvell r63020 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r62966 (mirror)

• OpenVPN 2.6.15: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104 r62157
r62170 r62192 r62240 r62268 r62324 r62365 r62374 r62418 r62460 r62508 r62540 r62606 r62778 r62890 r62966 r63020

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[marcus83]

always the same problem...WRT3200ACM (AP) does not load data:

[Rickers]

Router/Version: 1900ACv1
File/Kernel: 63020
Previous/Reset: 59045/Factory Reset
Mode/Status: AP
Issues/Errors: Client traffic not being routed to internet. This was tested on factory defaults. Back to 59045.

Notes
Can we get this ubootenv issue fixed on 1900ACv1? It's been there a while...or is that unit not supported any more?

"ubootenv list" problem still exists:


Used power switch procedure to manually switch partitions and boot back into 59045 and then reloaded prior settings.

[MBehr]

Router/Version: WRT1900ACv2
File/Kernel: DD-WRT v3.0-r63020 std (12/10/25)
Previous/Reset: none
Mode/Status: AP
Issues/Errors: none

[marcus83]

[MBehr]

Router/Version: WRT1900AC
File/Kernel: DD-WRT v3.0-r63020 std (12/10/25)
Previous/Reset: none
Mode/Status: AP
Issues/Errors: No radios, no SSH access, no firmware upload. Had to power cycle x3 to restore previous (ddwrt-linksys-wrt1900ac-r62540)

[Rickers]

[greenphantom61]

Router/Version: Linksys WRT3200ACM
Firmware: DD-WRT v3.0-r63020 std (12/10/25)
File/Kernel: Linux 6.1.159-rt28 #271 SMP Wed Dec 10 02:19:48 +07 2025 armv7l
Previous/Reset: r62606, No reset
Mode/Status: AP/Gateway, No VPN, Stable, SFE disabled,wlan0 5GHz AC/N Mixed VHT80 WPA2-Personal-CCMP, wlan1 2.4Ghz N-only HT40 WPA2-Personal-CCMP, DDNS (SSL/TLS)
Issues/Errors: Same problem as marcus83 No In Out or Total (Data) all 0's so I'm back to r62606

Thanks