[blkt]

Welcome to Broadcom r62924 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r62890 (mirror)

• OpenVPN 2.6.15: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104 r62157
r62170 r62192 r62240 r62268 r62324 r62365 r62374 r62418 r62460 r62508 r62540 r62606 r62778 r62890 r62924

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r62924_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st68 #42200 Thu Dec 4 05:07:37 +07 2025 mips
Previous/Reset: 62890 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 5:19 hours
CPU Temperature: WL0 46.0 °C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

Thank you BS and gurus!

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r62924) / Linux 4.4.302-rt232-st68 #14641 SMP Thu Dec 4 03:10:29 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r62890 std (12/01/25) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server (for mobile) & client (for site-to-site with static route on PC) + Cron / working
Issues/Errors: none

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r62924 std / Linux 4.4.302-rt232-st68 #14649 SMP Thu Dec 4 04:11:13 +07 2025 armv7l
Previous/Reset: 62890 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:29 hours
CPU Temperature: CPU 76.3 °C / WL0 46.7 °C / WL1 0.0 °C (ambient temperature 20.1 °C)
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[Alozaros]

Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r62924 std (12/04/25)
Kernel Version Linux 4.4.302-rt232-st68 #14641 SMP Thu Dec 4 03:10:29 +07 2025 armv7l

update: CLI r62606 > r62924
reset: NO
mode: Gateway/DNScrypt-proxy v2 via Entware, AD-Block (via DNSmasq script + DNScrypt block list),IPset Firewall, Forced DNS, AP&Net Isolation, x3VLAN's on their own bridge, VPN client(PBR), 40 HT 2.4Ghz only, Disable 121, CTF&FA - disabled
status: Operational 12h+
errors: nothing new, yet...

no NFT-tables on this router yet..so, all normal...Thanks BS and Team !

p.s. one odd thing...

iptables -vnL INPUT shows

350 11200 DROP all -- br2 * 0.0.0.0/0 0.0.0.0/0 state NEW

currently nothing is plugged into the LAN-port, where this bridge is assigned to...(LAN port 2 > br 2)
as there are no clients there, no idea why this traffic occurs and what it shows off.....port is not tagged on the WAN, nor on the local...and i believe it never happened before...or ive never noticed it...

[KACTET]

Router/Version: Asus RT-AC88U
Update method: WebUpgrade
File/Kernel: asus_rt-ac88u-firmware.trx_r62924 std / Linux 4.4.302-rt232-st68 #14646 SMP Thu Dec 4 03:50:25 +07 2025 armv7l
Previous/Reset: r62890 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:17 hours
CPU Temperature: CPU 77.1 °C / WL0 50.3 °C / WL1 48.3°C (ambient temperature 20.1 °C)
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!