[blkt]

Welcome to Atheros r62924 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r62890 (mirror)

• OpenVPN 2.6.15: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104 r62157
r62170 r62192 r62240 r62268 r62324 r62365 r62374 r62418 r62460 r62508 r62540 r62606 r62778 r62890 r62924
• r60771-r62924 migrates IPQ806x from swconfig to DSA however VLAN configurations will not; no more Switch Config tab.
• IPQ806x: Asrock G10, Linksys EA8500, Netgear R7500, R7500v2, R7800, XR500 (XR450) & Trendnet TEW-827DRU v1.0R.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[Be Inspired]

Hello to all,

Upgraded both of my devices to this build from r62890 without reset and all i use are working fine.

Thank you very much BS and devs!

[grc]

build for netgear r7800 is with 50 MB too big

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Linksys MX8500
File/Kernel: DD-WRT v3.0-r62924 std (12/04/25) / Linux 6.6.118-rt29 #4705 SMP Thu Dec 4 12:30:44 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r62890 std (12/01/25) / Linux 6.6.118-rc1-rt29 #4652 SMP Mon Dec 1 06:29:09 +07 2025 aarch64
Mode/Status: Gateway / Working Normally
Issues/Errors: None

[KACTET]

Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r62890 / Linux 3.18.140-d6 #253285 Thu Dec 4 06:37:29 +07 2025 mips
Previous/Reset: r62890 / no
Mode/Status: AP wired and wireless / Up and running for 5:03
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.
Incorrect rate of wlan0 - 800 Mbit/s!

Thank you BS and gurus!

[ArjenR49]

XR500 (and R7800?) owners note:
Upgrade to build r62924 failed on XR500 (IMAGE TOO LARGE)
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=339280

[jrscs]

Router/Version: Linksys MX4300 (Primary)
Firmware: DD-WRT v3.0-r62924 std (12/04/25)
Kernel: Linux 6.6.118-rt29 #4705 SMP Thu Dec 4 12:30:44 +07 2025 aarch64
Previous: DD-WRT v3.0-r62890 std (12/01/25)
Update Method: WebGUI
Mode/Status: Gateway/Ok
Reset: No
Setup:
WAN Connection Type: Static IP
Shortcut Forwarding Engine: NSS-ECM, QoS: Disable
Mesh Network, Bridging, & Vlan
Wlan0, Mesh/802.11s 5.0 GHz AX-only 80 GHz WPA3
Wlan1, AP 2.4 GHz N/G Mixed 20 GHz WPA2
Wlan1.1, VAP 2.4 Guest Network
Wlan2, AP 5.0 GHz AX/AC/N Mixed 80 GHz WPA2
Domain United States: txpower wlan0 - 25 dBm, wlan1 - 27 dBm, wlan2 - 28 dBm
IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding
USB 3.2 Gen 1 (USB 3.0) Seagate One Touch 2TB STKB2000400 (exFAT), NAS, Samba (Restricted User/Password)
NTP Client, Wireguard Server, Wake-on-WAN (Internet), SSH (public key)
Issues/Errors: None/Ok

Up Time 25+ hours...

Router/Version: Linksys MX4300 (Node)
Firmware: DD-WRT v3.0-r62924 std (12/04/25)
Setup:
WAN Connection Type: Disabled
Mesh Network, Bridging, & Vlan
Shortcut Forwarding Engine: NSS-ECM, QoS Disable
Wlan0, Mesh/802.11s 5.0 GHz AX-only 80 GHz WPA3
Wlan1, AP 2.4 GHz N/G Mixed 20 GHz WPA2
Wlan1.1, VAP 2.4 Guest Network
Wlan2, AP 5.0 GHz AX/AC/N Mixed 80 GHz WPA2
Issues/Errors: None/Ok

Thanks BrainSlayer

[matjazk]

Router/Version: Linksys MR7500
File/Kernel: DD-WRT v3.0-r62924 std (12/04/25) / Linux 6.6.118-rt29 #4703 SMP Thu Dec 4 11:45:28 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r62890 std (12/01/25) / No
Mode/Status: WAP, VLANs, SSH
Issues/Errors: Upgraded OK (Web interface). USB flash drive works, partitions are mounted automatically.
Notes: Free/available memory is slightly better than in 62890 (by approx. 5 MB), but still worse than in r62606 (by 5-10MB). It seems that btop is not available in this version, at least not for MR7500. A copy from an older version works, though.