DD-WRT :: View topic - New Build - 11/02/2025

New Build - 11/02/2025 - r62508

DD-WRT Forum Index -> Qualcomm Atheros based Hardware

Goto page Previous 1, 2

View previous topic :: View next topic

Author

Message

Zyxx
DD-WRT Guru

Joined: 28 Dec 2018
Posts: 1097

Posted: Tue Nov 04, 2025 7:31 Post subject:

MR7350: Today my devices did not work on WLAN0 again, Uptime 13h.

When I switched my devices into WLAN1 it started to complain and give:

user.err : [ath11k_watchdog] : zero signal issue detected on interface wlan1

over and over again, but at least internet was working for IPv4 but as in previous report IPv6 failed.

Had to reboot Router 3 times in a row, to get all devices working again.
This makes several manual reboots in last 24h needed for stable operation in this release.

Sponsor

Vercety
DD-WRT User

Joined: 04 May 2024
Posts: 229

Posted: Tue Nov 04, 2025 12:00 Post subject:

Router/Version: wr740nv4
File/Kernel: 1tl-wr740nv4-webflash 11-02-2025-r62508.bin/Linux 3.10.108-d11 #208166 Sun Nov 2 10:19:22 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460 /no
Mode/Status: ap/1 day 2h 13min
Issues/Errors: no

Router/Version: TL-WA901ND v3
File/Kernel: tl-wa901ndv3-webflash_ 11-02-2025-r62508.bin/Linux 3.18.140-d6 #250317 Sun Nov 2 10:49:04 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/1 day 2h 18min
Issues/Errors: no

Router/Version: WR743NDv2
File/Kernel: tl-wr743ndv2-webflash 11-02-2025-r62508.bin/ Linux 3.10.108-d11 #208168 Sun Nov 2 10:21:52 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/ 10h 53min
Issues/Errors: no

Router/Version: TL-WR1043NDv1
File/Kernel: tl-wr1043nd-webflash 11-02-2025-r62508.bin/Linux 3.10.108-d11 #208150 Sun Nov 2 09:54:17 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/8h:54min
Issues/Errors: no

Router/Version: TL-WDR4300 v1
File/Kernel: tl-wdr4300_us-webflash 11-02-2025-r62508.bin/Linux 3.10.108-d11 #208122 Sun Nov 2 08:55:49 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/19h:10min
Issues/Errors: no

Router/Version: TP-Link TL-WR741ND v1
File/Kernel: tl-wr741ndv1-webflash 11-02-2025-r62508.bin/Linux 3.10.108-d11 #208158 Sun Nov 2 10:03:15 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/ 1day 2h 33min
Issues/Errors: no

Router/Version: TL-WA901ND v2
File/Kernel: tl-wa901ndv2-webflash_11-02-2025-r62508.bin/Linux 3.10.108-d11 #208156 Sun Nov 2 10:01:11 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/ 1 day, 2h:32min
Issues/Errors: no

Router/Version: TL-WA901ND v5
File/Kernel: tl-wa901ndv5-webflash_11-02-2025-r62508.bin/Linux 3.18.140-d6 #250329 Sun Nov 2 11:04:34 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/ 1 day 2h:33min
Issues/Errors: no

Router/Version: TL-WA7510N v1
File/Kernel: tl-wa7510n-webflash 11-02-2025-r62508.bin/Linux 3.10.108-d11 #208160 Sun Nov 2 10:05:55 +07 2025 mips
Previous/Reset: 10/30/2025 - r62460/no
Mode/Status: ap/1 day 2h 35min
Issues/Errors: no

Wildlion
DD-WRT Guru

Joined: 24 May 2016
Posts: 1463

Posted: Tue Nov 04, 2025 15:43 Post subject:

Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r62508 std)
Kernel: Linux 3.10.108-d11 #208120 Sun Nov 2 08:36:18 +07 2025 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:

Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r62508 std)
Kernel: Linux 3.10.108-d11 #208122 Sun Nov 2 08:55:49 +07 2025 mips
Status: working
Reset: No
Notes on configuration:

Errors:

matjazk
DD-WRT User

Joined: 21 Aug 2019
Posts: 265
Location: Here, There And Everywhere

Posted: Tue Nov 04, 2025 19:22 Post subject:

Router/Version: Linksys MR7500
File/Kernel: DD-WRT v3.0-r62508 std (11/02/25) / Linux 6.6.115-rt29 #4440 SMP Sat Nov 1 17:51:55 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r62460 std (10/30/25) / No
Mode/Status: WAP, VLANs
Issues/Errors: Smooth firmware upgrade with the web interface. The problems with mounting the USB drive are still there: the router enters a boot loop if the drive is inserted and automount enabled. The boot loop can be stopped by unplugging the drive.

Free/available memory is very low, even immediately after reboot.

Code:

total used free shared buff/cache available
Mem: 379844 294956 37980 0 64676 84888
Swap: 0 0 0

oops.txt

Description:

Contents of the "oops" partition.

Download

Filename:

oops.txt

Filesize:

7.79 KB

Downloaded:

3 Time(s)

dplotz
DD-WRT User

Joined: 07 Jan 2025
Posts: 303
Location: Bethel Park, PA, USA

Posted: Wed Nov 05, 2025 10:47 Post subject:

Router/Version: Linksys MR7350
File/Kernel: DD-WRT v3.0-r62508 std (11/02/25), Linux 6.6.115-rt29 #4440 SMP Sat Nov 1 17:51:55 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r62460 std (10/30/25), no reset
Mode/Status: Gateway (NSS-ECM), Access Point (2.4GHz-HT20 N/G Mixed, 5GHZ-VHT80 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, domain:UNITED STATES), IPV6 (DHCP6 w/ prefix delegation)
Issues/Errors:

Basically stuck in a boot loop again. Crashes after about 45 seconds and restarts. Seems to be related to either having the guest VAPs on br1 or USB, based on the previous testing I did.

Rolling back to 62460 still gave me the zero signal issue on all three devices. I'm back on 61848 for now. Too much going on at work right now to have sketchy wifi.

Thank you Brainslayer.
_________________
Formerly dpp3530
Linksys MX4300
Gateway, 2 wired APs, NSS-ECM , Clock 1651MHz
VAPs on wlan0 and wlan1 for guest/IOT devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (DOQ using NextDNS, Cloudflare), DNSMasq
Wireguard and OpenVPN server
2.4GHz: dd-wrt, AX Only, ACK Timing 2000, WPA3 SAE & WPA2 w/AES
5GHz: dd-wrt, AX/AC/N Mixed, ACK Timing 2000, WPA3 SAE & WPA2 w/AES
Verizon Fios, 500/500Mbps

Zyxx
DD-WRT Guru

Joined: 28 Dec 2018
Posts: 1097

Posted: Thu Nov 06, 2025 9:33 Post subject:
Today my Router again acted up and did not want to provide IPv6 and or IPv4 access for some wifi networks. I went ahead and killall -HUP dnsmasq --> everything working again. Not sure what to make out of this. For debugging I have allready a cronjob in place which does this every night, but seemingly this is not enough.

retry
DD-WRT User

Joined: 05 Mar 2017
Posts: 62

Posted: Sat Nov 08, 2025 2:48 Post subject:
Router/Version: Buffalo WZR-HP-AG300H File/Kernel: Linux 3.10.108-d11 #208106 Sun Nov 2 07:02:31 +07 2025 mips Previous/Reset: r59171/no Mode/Status: wireless station bridge, WAN disabled / Working Issues/Errors: none My secondary router that just serves as a glorified wifi adapter for a VOIP phone using the 2.4ghz channel (5ghz disabled).

Zyxx
DD-WRT Guru

Joined: 28 Dec 2018
Posts: 1097

Posted: Tue Nov 11, 2025 13:22 Post subject:

Found one entry in oops partition (strings /dev/mtdblock20)

Code:

<6>[22695.220769] ath11k c000000.wifi wlan0: left allmulticast mode
<6>[22695.220830] ath11k c000000.wifi wlan0: left promiscuous mode
<6>[22695.225604] br0: port 8(wlan0) entered disabled state
<1>[22695.306811] Unable to handle kernel paging request at virtual address 000000e0000016fc
<1>[22695.306857] Mem abort info:
<1>[22695.313618] ESR = 0x0000000096000004
<1>[22695.316311] EC = 0x25: DABT (current EL), IL = 32 bits
<1>[22695.320160] SET = 0, FnV = 0
<1>[22695.325598] EA = 0, S1PTW = 0
<1>[22695.328739] FSC = 0x04: level 0 translation fault
<1>[22695.331517] Data abort info:
<1>[22695.336363] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
<1>[22695.339506] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
<1>[22695.344786] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
<1>[22695.349916] [000000e0000016fc] address between user and kernel address ranges
<0>[22695.355295] Internal error: Oops: 0000000096000004 [#1] SMP
<4>[22695.355301] Modules linked in: ipcomp6 xfrm6_tunnel mip6 ah6 esp6 wireguard libchacha20poly1305 ip6t_rt ip6table_mangle ip6table_filter ip6_tables xt_psd(O) xt_lscan(O) xt_TARPIT(O) xt_geoip(O) ath11k_ahb(O) ath11k(O) mac80211(O) qmi_helpers(O) compat(O) xfrm_ipcomp xfrm_algo sit ip_tunnel tunnel4 cdc_ncm cdc_ether usbnet usbcore usb_common qca_nss_wifi_meshmgr(O) qca_nss_bridge_mgr_ipq60xx(O) nss_ifb(O) qca_mcs(O) qca_nss_tunipip6_ipq60xx(O) ip6_tunnel tunnel6 qca_nss_vxlanmgr_ipq60xx(O) vxlan qca_nss_l2tpv2_ipq60xx(O) l2tp_core ip6_udp_tunnel udp_tunnel qca_nss_pptp_ipq60xx(O) pptp qca_nss_qdisc_ipq60xx(O) qca_nss_vlan_ipq60xx(O) qca_nss_pppoe_ipq60xx(O) bonding cryptodev(O) qca_nss_netlink_ipq60xx(O) qca_nss_cfi_cryptoapi_ipq60xx(O) qca_nss_crypto_ipq60xx(O) qca_nss_drv_ipq60xx(O) qca_nss_dp_ipq60xx(O) qca_ssdk(O) mtdoops [last unloaded: esp6]
<4>[22695.355460] CPU: 1 PID: 6785 Comm: brctl Tainted: G O 6.6.115-rt29 #4440
<4>[22695.355468] Hardware name: Linksys MR7350 (DT)
<4>[22695.355472] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
<4>[22695.355480] pc : __mutex_lock.constprop.0+0xc8/0x52c
<4>[22695.355496] lr : __mutex_lock_slowpath+0x14/0x20
<4>[22695.355505] sp : ffffffc08155ba10
<4>[22695.355508] x29: ffffffc08155ba10 x28: ffffff8002105400 x27: 0000000000000000
<4>[22695.355519] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000038
<4>[22695.355529] x23: ffffff8002b629e8 x22: 0000000000000002 x21: ffffff8002b629f8
<4>[22695.355539] x20: ffffff8002b68860 x19: ffffff8002b68860 x18: 000000000000000a
<4>[22695.355549] x17: 0000000000000002 x16: fffffffe000d2b20 x15: 0000000000000000
<4>[22695.355559] x14: 0000000000000174 x13: 000000000000024c x12: ffffff80021054d0
<4>[22695.355570] x11: 00000000000000c0 x10: 0000000000000890 x9 : 0000000000000040
<4>[22695.355580] x8 : ffffffc080c9bac0 x7 : 0000000000000000 x6 : 0000000000000001
<4>[22695.355590] x5 : 0000000000000001 x4 : 000000e0000016c1 x3 : 0000000000000000
<4>[22695.355600] x2 : ffffff8002105400 x1 : 000000e0000016c0 x0 : 000000e0000016c0
<4>[22695.355611] Call trace:
<4>[22695.355614] __mutex_lock.constprop.0+0xc8/0x52c
<4>[22695.355624] __mutex_lock_slowpath+0x14/0x20
<4>[22695.355632] mutex_lock+0x38/0x44
<4>[22695.355640] rhashtable_destroy+0x28/0x58
<4>[22695.355650] nbp_vlan_flush+0x40/0x60
<4>[22695.355661] del_nbp+0x128/0x344
<4>[22695.355672] br_del_if+0x48/0x10c
<4>[22695.355680] add_del_if+0x58/0xa0
<4>[22695.355689] br_ioctl_stub+0x234/0x4ec
<4>[22695.355698] br_ioctl_call+0x5c/0xac
<4>[22695.355707] dev_ifsioc+0x308/0x450
<4>[22695.355717] dev_ioctl+0x288/0x474
<4>[22695.355724] sock_ioctl+0x348/0x540
<4>[22695.355731] __arm64_sys_ioctl+0x308/0x105c
<4>[22695.355742] invoke_syscall.constprop.0+0x48/0xd0
<4>[22695.355751] do_el0_svc+0x3c/0xbc
<4>[22695.355758] el0_svc+0x28/0xd8
<4>[22695.355765] el0t_64_sync_handler+0x120/0x12c
<4>[22695.355772] el0t_64_sync+0x178/0x17c
<0>[22695.355783] Code: a8c87bfd d50323bf d65f03c0 927df000 (b9403c01)
<4>[22695.355788] ---[ end trace 0000000000000000 ]---

Goto page Previous 1, 2

Display posts from previous:

Page 2 of 2

DD-WRT Forum Index -> Qualcomm Atheros based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Build - 11/02/2025 - r62508

Quick Links

Log in