QCN9274 support

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware
View previous topic :: View next topic  
Author Message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7824
Location: Dresden, Germany
PostPosted: Wed May 20, 2026 9:36    Post subject: QCN9274 support Reply with quote
next build will contain full support for QCN9274 cards with 802.11be support with 320mhz. however. i only tested this chipset yet on a ipq95xx platform. so feedback is appreciated. like for qcn9074 cards 6 ghz support is included of course.
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Back to top View user's profile Send private message Send e-mail Visit poster's website Facebook Instagram Discord
Sponsor
cml750
DD-WRT User


Joined: 18 Mar 2012
Posts: 276
Location: Texas
PostPosted: Fri May 22, 2026 13:38    Post subject: Reply with quote
I was hoping adding this WIFI card with the Ath12K drivers would make my QCNCM865 "Fast connect 7800"work however I did not get the WIFI tab when I installed the latest build.
_________________
Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, two RLTK 8127 cards & dual AQC113 M2 slot card. Currently running OpenWRT and Adguard.

2 GL.iNET GL-BE9300 Flint 3 with (GLiNet Custom OpenWRT) as AP's (WIFI 7 for the whole home now)
GL.iNET GL-MT6000 Flint 2 with pure OpenWRT not in use

GL INET GL-BE3600 Slate 7 Travel Router as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r65574) one used as a bridge
WRT54G-TM not in use

My best WIFI speed with the GL.Inet Flint 2 is 1147 down and 39 up
https://www.speedtest.net/result/18931816642
Best wired speed is 1150 down and 39 up.
https://www.speedtest.net/result/19238557638
Back to top View user's profile Send private message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7824
Location: Dresden, Germany
PostPosted: Sat May 23, 2026 7:27    Post subject: Reply with quote
cml750 wrote:
I was hoping adding this WIFI card with the Ath12K drivers would make my QCNCM865 "Fast connect 7800"work however I did not get the WIFI tab when I installed the latest build.


can you send me a lspci output. usually this is a really new chipset which got added to ath12k just recently. i will work on it to support it up to the latest chipsets
so far only the mentioned chipset was tested and i did not test it on x64 since i dont have minipcie modules of that chipset. so this is just a cross over effect from ipq95xx based boards
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Back to top View user's profile Send private message Send e-mail Visit poster's website Facebook Instagram Discord
cml750
DD-WRT User


Joined: 18 Mar 2012
Posts: 276
Location: Texas
PostPosted: Sat May 23, 2026 11:07    Post subject: Reply with quote
Output
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:15.0 Serial bus controller: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #8 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Q370 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-LM (rev 10)
01:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
01:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
01:00.2 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
01:00.3 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
02:00.0 Network controller: Qualcomm Technologies, Inc WCN785x Wi-Fi 7(802.11be) 320MHz 2x2 [FastConnect 7800] (rev 01)
03:00.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:01.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:02.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:03.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:04.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)
06:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)
_________________
Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, two RLTK 8127 cards & dual AQC113 M2 slot card. Currently running OpenWRT and Adguard.

2 GL.iNET GL-BE9300 Flint 3 with (GLiNet Custom OpenWRT) as AP's (WIFI 7 for the whole home now)
GL.iNET GL-MT6000 Flint 2 with pure OpenWRT not in use

GL INET GL-BE3600 Slate 7 Travel Router as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r65574) one used as a bridge
WRT54G-TM not in use

My best WIFI speed with the GL.Inet Flint 2 is 1147 down and 39 up
https://www.speedtest.net/result/18931816642
Best wired speed is 1150 down and 39 up.
https://www.speedtest.net/result/19238557638
Back to top View user's profile Send private message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7824
Location: Dresden, Germany
PostPosted: Sun May 24, 2026 5:57    Post subject: Reply with quote
cml750 wrote:
Output
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:15.0 Serial bus controller: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #8 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Q370 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-LM (rev 10)
01:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
01:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
01:00.2 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
01:00.3 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)
02:00.0 Network controller: Qualcomm Technologies, Inc WCN785x Wi-Fi 7(802.11be) 320MHz 2x2 [FastConnect 7800] (rev 01)
03:00.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:01.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:02.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:03.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
04:04.0 PCI bridge: Pericom Semiconductor PI7C9X2G608GP PCIe2 6-Port/8-Lane Packet Switch
05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)
06:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04)


you missed the -n option. but i can find the ids from the database by name
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Back to top View user's profile Send private message Send e-mail Visit poster's website Facebook Instagram Discord
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7824
Location: Dresden, Germany
PostPosted: Sun May 24, 2026 6:04    Post subject: Reply with quote
can you send me a bootlog? because this chipset is supported by the driver.

edit: was still missing a addition driver required. so ath11k and ath12k should be fixed in todays build. i will just fix it up and recompile
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Back to top View user's profile Send private message Send e-mail Visit poster's website Facebook Instagram Discord
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum