BS, I will have to test it out in my old computer. Since the board in my new computer has built in WIFi, it does not have a WIFI slot. I have the only two M2 slots filled with AQC113 M2 cards. I will tinker with it today and try it. I was going to get the old one fixed up as a hot swap machine in the event I have any issues. I have plenty of extra network cards for this purpose. _________________ Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, two RLTK 8127 cards & dual AQC113 M2 slot card. Currently running OpenWRT and Adguard.
2 GL.iNET GL-BE9300 Flint 3 with (GLiNet Custom OpenWRT) as AP's (WIFI 7 for the whole home now)
GL.iNET GL-MT6000 Flint 2 with pure OpenWRT not in use
GL INET GL-BE3600 Slate 7 Travel Router as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r65574) one used as a bridge
WRT54G-TM not in use
@brainslayer, I loaded the latest build on a thumb drive and tried to get the old computer up and running It went into a kernel panic boot loop. Below is a picture from the screen when the boot loop took place if it helps.
Screenshot 2026-05-25 113539.jpg
Description:
Filesize:
311.4 KB
Viewed:
419 Time(s)
_________________ Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, two RLTK 8127 cards & dual AQC113 M2 slot card. Currently running OpenWRT and Adguard.
2 GL.iNET GL-BE9300 Flint 3 with (GLiNet Custom OpenWRT) as AP's (WIFI 7 for the whole home now)
GL.iNET GL-MT6000 Flint 2 with pure OpenWRT not in use
GL INET GL-BE3600 Slate 7 Travel Router as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r65574) one used as a bridge
WRT54G-TM not in use
So I then loaded the thumb drive with 65079 which I know works (and did) and then tried to do an upgrade. It failed due to a EXT4 FS error that just kept repeating.
Edit: I should add that I am using the ( dd-wrt_x64_full_efi_vga-ext4 ) image and upgrade files.
Error.jpg
Description:
Filesize:
230.43 KB
Viewed:
409 Time(s)
_________________ Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, two RLTK 8127 cards & dual AQC113 M2 slot card. Currently running OpenWRT and Adguard.
2 GL.iNET GL-BE9300 Flint 3 with (GLiNet Custom OpenWRT) as AP's (WIFI 7 for the whole home now)
GL.iNET GL-MT6000 Flint 2 with pure OpenWRT not in use
GL INET GL-BE3600 Slate 7 Travel Router as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r65574) one used as a bridge
WRT54G-TM not in use
Joined: 06 Jun 2006 Posts: 7822 Location: Dresden, Germany
Posted: Mon May 25, 2026 18:57 Post subject:
looks like incomplete written image. consider that i'm running it from a usb stick. i get no fs errors and the first was crashing with your wifi card. but screenshots are totally useless. i need full logs which are most easiest to get with serial. because your screeshot just shows me the end of the log but not where it begins. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
The computer actually has a serial port on the back. I do not have any serial cables at the moment. I will see about ordering one and seeing what I can do. I used to have one around here but have no idea where in the world where it would be. _________________ Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, two RLTK 8127 cards & dual AQC113 M2 slot card. Currently running OpenWRT and Adguard.
2 GL.iNET GL-BE9300 Flint 3 with (GLiNet Custom OpenWRT) as AP's (WIFI 7 for the whole home now)
GL.iNET GL-MT6000 Flint 2 with pure OpenWRT not in use
GL INET GL-BE3600 Slate 7 Travel Router as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r65574) one used as a bridge
WRT54G-TM not in use
