Posted: Fri Sep 26, 2025 8:16 Post subject: New Build - 09/26/2025 - r62192
Welcome to Marvell r62192 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: 1900ACv1
File/Kernel: 62192
Previous/Reset: 59045/Factory Reset
Mode/Status: AP
Issues/Errors: SFE still not working. Internet speed slow when enabled. Cannot run a speed test when it's enabled. Back to 59045.
Update method: CLI / SSH flash from konsole over wireless
Router/Version: Linksys WRT32X
File/Kernel: ddwrt-linksys-wrt32x-webflash.bin / Linux 6.1.153-rt28 #149 SMP Fri Sep 26 02:47:07 +07 2025 armv7l
Previous/Reset: 61848 / No, last reset at 61848
Mode/Status: Gateway, AP, PPPoE, SFE disabled, WAN to ONT, ignore WAN DNS, non-default router IP, SmartDNS for DoT (single host, dualstack IP enabled), DDNS (TLS enabled), wireguard server (preshared key, non-default port), SSHD (public key only, non-default port), telnet disabled, no VAP, wlan0 5GHz VHT80 AC only, wlan1 2.4GHz HT20 N only, wlan2 disabled, WPA2 Personal CCMP-128 all radios / Working only if SFE is disabled
Issues/Errors: No WAN IP via PPPoE if SFE is enabled. Seems to be an sporadic / recurring problem which appears and disappears between builds.
Posted: Tue Sep 30, 2025 19:39 Post subject: Unstable for WRT32x
Router/Version: WRT32x
File/Kernel: ddwrt-linksys-wrt32x-webflash.bin
Previous/Reset: 39144 / Yes (nvram erase)
Mode/Status: Basic AP
Issues/Errors: Keeps disconnecting LAN ports. Was constantly rebooting before the nvram erase; UPDATE: Might have been a shady ethernet cable/port. When the AP is connected to the wall/main router, I don't see any disconnects.
I will say, it really doesn't like you touching the wireless settings at all. I generally have to reboot the router after any wireless setting save/apply, because it hangs.
