[cml750]

Welcome to Marvell r62170 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r62157 (mirror)

• OpenVPN 2.6.14: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104 r62157
r62170

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[ewo32]

Update method: CLI / SSH flash from konsole over wireless
Router/Version: Linksys WRT32X
File/Kernel: ddwrt-linksys-wrt32x-webflash.bin / Linux 6.1.153-rt28 #137 SMP Sat Sep 20 10:31:39 +07 2025 armv7l
Previous/Reset: 62036 / No, last reset at 62036
Mode/Status: Gateway, AP, PPPoE, SFE enabled, WAN to ONT, ignore WAN DNS, non-default router IP, SmartDNS for DoT (single host, dualstack IP enabled, prefetch domain disabled, serve expired disabled), DDNS (TLS enabled), wireguard server (preshared key, non-default port), SSHD (public key only, non-default port), telnet disabled, no VAP, wlan0 5GHz VHT80 AC only, wlan1 2.4GHz HT20 N only, wlan2 disabled, WPA2 Personal CCMP-128 all radios / Working
Issues/Errors: None

Previously missing 32X files in the downloads directory have been restored, and the 32X with SFE enabled can now get a WAN IP via PPPoE. GUI is working.

Thank you BrainSlayer and devs for the fixes.

Note : The HTTPS download link in the build announcement returns a 404 error.

[Rickers]

Linksys wrt1900ac v1 missing webflash file again.

[greenphantom61]

Router/Version: Linksys WRT3200ACM
Firmware: DD-WRT v3.0-r62170 std (09/20/25)
File/Kernel: Linux 6.1.153-rt28 #137 SMP Sat Sep 20 10:31:39 +07 2025 armv7l
Previous/Reset: r62104, No reset
Mode/Status: AP/Gateway, No VPN, Stable, SFE disabled,wlan0 5GHz AC/N Mixed VHT80 WPA2-Personal-CCMP, wlan1 2.4Ghz N-only HT40 WPA2-Personal-CCMP, DDNS (SSL/TLS)
Issues/Errors: None

Thanks Brainslayer

[MBehr]

Router/Version: WRT1900ACv2
File/Kernel: DD-WRT v3.0-r62170 std (09/20/25)
Previous/Reset: none
Mode/Status: AP
Issues/Errors: none

[Francoisb]

Router/Version: WRT3200ACM (Primary)
Firmware: DD-WRT v3.0-r62170 std (09/20/25)
Kernel: Linux 6.1.153-rt28 #137 SMP Sat Sep 20 10:31:39 +07 2025 armv7l
Previous: DD-WRT v3.0-r61848 std (06/24/25)
Update Method: WebGUI
Mode/Status: Gateway/Ok
Reset: No
Setup:
WAN Connection Type: PPPoE
Shortcut Forwarding Engine: Disable
WAN DNS: Ignore
WiFi: Disabled
Services: DDNS, IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding (Iptables), Cron, Access Restrictions, Security WAN (Multiple rules), Connection Watchdog
Issues/Errors: None/OK (up 0 days, 17:55)

[carloslopes]

Update method: Web flash
Router/Version: Linksys WRT32X
File/Kernel: ddwrt-linksys-wrt32x-webflash.bin
Previous/Reset: r59045 / No reset
Mode/Status: AP/Gateway
Services: DDNS, USB, NAS/FTP, OpenVPN
Issues/Errors: All OK but the following...

Enabling SFE stalls the traffic between LAN1-4 ports and WAN. Wireless connected devices work fine but wired devices have trouble communicating outside the internal network. Opening Internet sites start well but the page load stops after a berief moment.
Disabling SFE resolves the issue.

proFTPd is not loading in my setup. But I couldn't get it to work in any release that I tried anyway. Tried r55460, r59045 and r62170.
invoking the tool from the command line, via telnet, doesn't help. It's installed but gives no output...