Joined: 18 Mar 2014 Posts: 13879 Location: Netherlands
Posted: Thu Aug 21, 2025 5:31 Post subject:
efficient_horror wrote:
Sorry about the late reply. I monkey tested for a while, and the issue appears to be fixed. Hopefully the change can be merged. Thank you for looking into it.
Thanks for testing, I made a stop gap to fix it but at least I have found the problem, so I will contact BS again to make a permanent fix
if you also use WireGuard can you test this build also and let me know? It has a rewrite of the WireGuard code.
Joined: 08 May 2018 Posts: 17259 Location: Texas, USA
Posted: Fri Aug 22, 2025 2:32 Post subject:
I think the first of these is more relevant than the second, but it looks as if your change was implemented for testing. Was the wrong path corrected on your end prior to your patch in your community build, @egc?
Joined: 18 Mar 2014 Posts: 13879 Location: Netherlands
Posted: Fri Aug 22, 2025 6:16 Post subject:
kernel-panic69 wrote:
I think the first of these is more relevant than the second, but it looks as if your change was implemented for testing. Was the wrong path corrected on your end prior to your patch in your community build, @egc?
After some long and hard starring I was the one who found the wrong path, I actually thought correcting this should be sufficient as now the volume should be correctly unmounted and it could be mounted again but from my limited testing it was not always the case maybe the unmount was not always successful as the resource could be busy, and so the mount still could fail, so I actually devised this workaround to work around this but the real problem still needs to be found/adressed _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399 Install guide R7800/XR500:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614 Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
