[blkt]

Welcome to MediaTek r62104 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r62036 (mirror)

• OpenVPN 2.6.14: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104
• r60771-r62104 migrates IPQ806x from swconfig to DSA however VLAN configurations will not; no more Switch Config tab.
• IPQ806x: Asrock G10, Linksys EA8500, Netgear R7500, R7500v2, R7800, XR500 (XR450) & Trendnet TEW-827DRU v1.0R.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[Pedal Pusher]

Fresh install of this r62104 Beta on a Netgear R6700v2, configured in Router mode, as a Wifi AP (no DHCP, no DNS). I have also attached a USB harddrive to the router, and established a SMB share.

I've had issues with the "Switched Tab" for VLANs not appearing. But this appears to be a longstanding issue. I take it VLANs can be configured from the terminal via swconfig? I'd like to assign the WLAN port to the LAN, if possible. Also, authentication for smb, for MacOS Seqouia clients appears to be broken.

Aside from that, its been smooth sailing.

[tomobobo]

Uh so I didn't update for a while I guess, on a Netgear R6220 I upgraded to this version from Firmware: DD-WRT v3.0-r54475 std (12/07/23), and I suddenly couldn't connect to my webserver running on a local machine from an external ip. It felt like the ddwrt web interface was like interfering with port 80 somehow or something idk. Idk if I didn't read about or understand any new settings or whatever but I tried to figure it out all day and ended up downgrading to the previous version to solve the problem. I tried hard reset and did not restore settings through the backup utility but reconfigured the port forwarding and the problem persisted. I didn't have any specific reason to upgrade and it wasn't until my friends started telling me my server wasn't working that I realized there was a problem because internally my dns requests resolved to the web server without issue. Been using DD-WRT for a very long time so I feel like I know how to use it, but yeah, this was an issue for me.