Posted: Sat Aug 09, 2025 20:40 Post subject: Please Help in setting up MX4300 Mesh (with wired backhaul)
- My current setup consists of 4-MX4300s all connected via wired backhaul.
- Please help me in configuring a mesh setup so that my device(s) can automatically connect to the nearest/strongest signal
- I have trawled though a lot of threads and tried to do it unsuccessfully
- Thanks
Main router
===========
Connection Type: Automatic Configuration - DHCP
Local IP Address: 192.168.1.1
DHCP Type: DHCP Server
DHCP Server: Enable
Operating Mode: Gateway
Other three routers
===================
Connection Type: Disabled
Local IP Address: 192.168.1.2 thru 192.168.1.4
DHCP Type: DHCP Server
DHCP Server: Disabled
Operating Mode: Router
Does it work for you with one primary (wired) + one secondary (wireless) node?
I haven't tried that. The Linksys devices are spread across 3-levels and wireless nodes haven't been reliable in the past (I'm changing over from the old T-Mobile ASUS RT-AC68U routers)
