Posted: Thu Jun 05, 2025 15:23 Post subject: New Build - 06/05/2025 - r61648
Welcome to x86 / x64 r61648 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Optiplex 5050 w/i7 -6700, 16 GB ram, & Realtek 8125 4 port 2.5 GBPS network card
File/Kernel: Full VGA 2 GB
Previous/Reset: no reset
Mode/Status: Router
Issues/Errors: The Realtek 8125 reporting at 1,000 rather than full 2,500 gbps _________________ HP Z240 Workstation with i7-7700K, 32GB Ram, X710-T4L, R8125B four port, 2 single port RLTK 8127's & a AQC113 M2 slot card. Self compiled OpenWRT 25.12
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r62268) one used as a bridge
WRT54G-TM not in use
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin
Firmware: DD-WRT v3.0-r61648 std (06/05/25)
Kernel: Linux 6.6.92 #382 SMP Thu Jun 5 14:18:05 +07 2025 x86_64
Mode: Gateway, SFE disabled, Wireguard for external access, WAN (PPPoE/VLAN7) to GPON Modem, Automatic Drive Mount disabled - using own mount script for USB Disk, samba/nfs to access USB3-ext4 SSD, Force reconnect 5:00 in the morning, using my own local NTP, CPU governour set to ondemand by script, Ignore WAN DNS, Recursive DNS Resolving (Unbound).
Reset: No
Status: Flashed at release, everything fine. Networking tab shows 2.5Gbit towards modem, so above mentioned issue seems to be a RTL (8125?) only thing. Intel i226 not affected.
One thing to add:
I have several access restricted SMB folders on this router, cannot access them anymore.
Tried to make them accessable with unrestricting them, but to no avail.
Ofc... the one time I dont test SMB it seems to be broken .
Tested on Linux/Debian testing and Android. No idea about Windows.
.