Posted: Mon Apr 28, 2025 4:09 Post subject: New Build - 04/28/2025 - r60791
Welcome to Atheros r60791 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Update method: Console Upgrade
Router/Version: GL.iNet-AR150
File/Kernel: DD-WRT v3.0-r60791 std (04/28/25)
Previous/Reset: DD-WRT v3.0-r59171 std (01/14/25) / No reset.
Mode/Status: Gateway, Wireguard, OpenVPN Server and Client, PPTP Server and Client, DDNS, SSH, Wireless Radio Mode: Station
Issues/Errors: Site Survey shows empty list. Incorrect rate of wlan0 - 800 Mbit/s!. Last working release which correctly displays APs on Site Survey and rate of wlan0 was r59171.
Screenshots and logs were sent to BrainSlayer via email and private message here, but those were never read. Also a pack from three different routers was attached on r60621 (might be wrong - it was long ago) topic.
I'll appreciate any info about GL.iNet-AR150 - is it discontinued or there is still chance to find working release in the future?
Joined: 03 Nov 2015 Posts: 383 Location: Florida, USA
Posted: Mon Apr 28, 2025 16:53 Post subject:
Router: Netgear R7800 ... WDS AP
............ Netgear R7800 ... WDS Station
Firmware: DD-WRT v3.0-r60791 std (04/28/25)
Kernel: Linux 6.1.135-rt28 #555 SMP Mon Apr 28 02:36:14 +07 2025 armv7l
Reset: NO ...GUI upgrade from r60697
Mode: 2.4 GHz only .. Firmware type VANILLA ..SFE Disabled
Errors: Nothing
.........LOOKING GOOD ... Thanks BS, Devs
******* UPDATE: Up time 8 hrs now. Some of the cleanest logs I seen in a while. This is a good one for me.... _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Last edited by ramblin on Mon Apr 28, 2025 23:54; edited 1 time in total
Joined: 07 Jan 2025 Posts: 240 Location: Bethel Park, PA, USA
Posted: Mon Apr 28, 2025 18:22 Post subject:
Router/Version: Linksys MR7350 x 3
File/Kernel: DD-WRT v3.0-r60791 std (04/28/25), Linux 6.6.88-rt29 #3158 SMP Mon Apr 28 05:40:08 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r60771 std (04/26/25), last reset on r60098
Mode/Status: Gateway (NSS-ECM), Access Point (5GHZ-HT20 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:UNITED STATES), performance governor, IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 Wired access points (2.4GHz-HT20 N/G Mixed, 5GHZ-HT80 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:UNITED STATES)
Issues/Errors:
Up 5 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed, wired and wifi, is very close to published, which is equal or favorable to the ISP router - tested via nPerf.com. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares. 5GHz showing 27dBm (set to 30dBm). 2.4GHz showing 28dBm (also set to 30dBm).
Still no issues.
Thank you Brainslayer. _________________ Formerly dpp3530 Linksys MR7350
Gateway, 2 wired APs, NSS-ECM , Clock 1440MHz
VAPs on wlan0 and wlan1 for guest/IOT devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (DOT using NextDNS, Cloudflare), DNSMasq
Wireguard and OpenVPN server
2.4GHz: dd-wrt, AX Only, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
5GHz: dd-wrt, AX/AC/N Mixed, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
Verizon Fios, 500/500Mbps
Router/Version: Linksys MR7350
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r60791 std (04/28/25)
Kernel: Linux 6.6.88-rt29 #3158 SMP Mon Apr 28 05:40:08 +07 2025 aarch64
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, bridged VAP on 2.4GHz, Wireguard for external access, WAN disabled, Keep Alive reboot 6:02 in the morning, using my own local NTP
Reset: No
Status: Installed yesteday, Ok.
Previous upgrades was from DD-WRT v3.0-r58730, DD-WRT v3.0-r58819, DD-WRT v3.0-02-09-2025-r59582, DD-WRT v3.0-02-27-2025-r59887, DD-WRT v3.0-03-24-2025-r60467 with minor issues.
Thanks B.S. and the team! _________________ Linksys EA8500
Joined: 07 Jan 2025 Posts: 240 Location: Bethel Park, PA, USA
Posted: Tue Apr 29, 2025 13:25 Post subject:
dplotz wrote:
Up 5 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed, wired and wifi, is very close to published, which is equal or favorable to the ISP router - tested via nPerf.com. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares. 5GHz showing 27dBm (set to 30dBm). 2.4GHz showing 28dBm (also set to 30dBm).
Still no issues.
Thank you Brainslayer.
Update: Had two wifi dropouts on the 5GHz while working yesterday. Nothing obvious in the logs, but I should have captured them.
I did a hard reset on the two access points and reconfigured. I'm keeping an eye on it now. _________________ Formerly dpp3530 Linksys MR7350
Gateway, 2 wired APs, NSS-ECM , Clock 1440MHz
VAPs on wlan0 and wlan1 for guest/IOT devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (DOT using NextDNS, Cloudflare), DNSMasq
Wireguard and OpenVPN server
2.4GHz: dd-wrt, AX Only, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
5GHz: dd-wrt, AX/AC/N Mixed, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
Verizon Fios, 500/500Mbps
Posted: Tue Apr 29, 2025 20:34 Post subject: Upgrade
Router/Version: Netgear R7800 (Primary and Secondaries)
Firmware: DD-WRT v3.0-r60791 std (04/28/25)
Previous: DD-WRT v3.0-r60771 std (04/26/25)
Update Method: WebUI
Mode/Status: Gateway/Ok
Reset: No, Yes on secondaries.
Setup:
Wlan0, 5GHz- AP, N/AC Mixed, 80MHz, WPA2
Wlan1, WDS (AP on main), WDS Station on others 2.4 GHz N/G Mixed 40 MHz WPA2 + WDS AP VAP with different SSIDs
SFE-DISABLED, STP - ENABLED.
Issues/Errors: WDS Stations never connect if a Virtual AP (VAP) is added, tried with WDS AP mode in VAP. The issue is present in r60697 and r60771 as well. I am not sure how much farther back until it works. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x5 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - Not used
D-Link 859 - WDS Station
D-Link 862L A1 x2 - WDS Station
UBNT 5AC loco x2 - airOS
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear R6400 - AP
MediaTek
UBNT EdgeRouter X - switch
Netgear R6350 - AP
Slow speeds at first (down to 19mbps download). Reset nvram via ssh command line. manually reset up everything since I am a very simple setup. Everything working great. I have not tested the USB.
