[blkt]

Welcome to Broadcom r61337 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r61298 (mirror)

• OpenVPN 2.6.14: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582 r59661 r59765 r59820
r59887 r59964 r60090 r60098 r60121 r60137 r60217 r60269 r60276 r60467 r60511 r60523 r60586 r60621 r60652 r60662
r60697 r60717 r60742 r60771 r60791 r60832 r60942 r61025 r61202 r61238 r61264 r61298 r61337

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r61337) / Linux 4.4.302-rt232-st63 #13719 SMP Fri May 16 04:52:00 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r61298 std (05/16/25) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-61337_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st63 #38456 Sat May 17 10:34:51 +07 2025 mips
Previous/Reset: 61298 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:21 hours
CPU Temperature: WL0 46.0 °C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

Thank you BS and gurus!

[adasch]

Router EA6900

General issue r61337 and older like r59661

Tab services and Static Leases

if in hostname user write wrong sign like: ()_ etc. DHCP don't run after restart router
similar with field "Lease Expiration"
if user leave it empty, DHCP don't run run after restart router

there is no warning, protection etc...

[KACTET]

Router/Version: Asus RT-AC88U
Update method: WebUpgrade
File/Kernel: asus_rt-ac88u-firmware.trx_r61337 std / Linux 4.4.302-rt232-st63 #13724 SMP Sat May 17 09:55:04 +07 2025 armv7l
Previous/Reset: 61298 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 3:58 hours
CPU Temperature: CPU 70.2 °C / WL0 46.3 °C / WL1 47.3°C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[denisr24]

Router/Version: Linksys EA6500 V1
Update method: WebUpgrade
File/Kernel: Linux 4.4.302-rt232-st63 #38440 Sat May 17 10:15:21 +07 2025 mips
Previous/Reset: 61298 / no
Mode/Status: Router AP WIFI 5GHz, WIFI 2.4Ghz
Issues/Errors: Nothing significant

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r61337 std / Linux 4.4.302-rt232-st63 #13727 SMP Sat May 17 10:10:20 +07 2025 armv7l
Previous/Reset: 60832 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 6:29 hours
CPU Temperature: CPU 75.2 °C / WL0 45.0 °C / WL1 0.0 °C (ambient temperature 24.1 °C)
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[PaulGo]

Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r61337 std (05/17/25)
Kernel Version: Linux 4.4.302-rt232-st63 #13725 SMP Sat May 17 10:00:52 +07 2025 armv7l
Previous/Reset: r60832 / no reset
Mode/Status: Gateway / Working
Issues/Errors: none

[Alozaros]

Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r61337 std (05/17/25)
Kernel Version Linux 4.4.302-rt232-st63 #13719 SMP Fri May 16 04:52:00 +07 2025 armv7l

update: CLI 61289 > 61337
reset: NO
status: Operational 24h +
errors: Whenever i play with VPN settings page and click save and apply, i end up with duplicated iptables rules..the only option is to reboot..apart of this, router is working as intended...
x3 VLANS on bridges and dhcpd's, VPN client, WIFI 2.4Ghz only, ipset and iptables firewall, DNScrypt-proxy v2 via Entware with domain names block list, DNSmasq ad-blocking script..ndpi access restriction custom, dpi and risk rules (filtered packets always show 0)...

also I just found that on Bandwidth Monitoring page - VLAN2 / WAN is missing or named differently

[thommy181]

Router: Linksys EA6400
Kernel: Linux 4.4.302-rt232-st63 #13719 SMP Fri May 16 04:52:00 +07 2025 armv7l
Previous: original r61298 build
Mode: Internet gateway, WIFI 5GHz, smartdns with DoH, iptables firewall, SshD, MSTP (tests)
Issues: On new bandwidth tab WAN isn't exist
Status: Working
Uptime: several hours (2 reboots)

All services on device working rather good. Performance is acceptable.

[Vauxi]

Router/Version: Asus RT-AC68U
File/Kernel: Linux 4.4.302-rt232-st63 #13719 SMP Fri May 16 04:52:00 +07 2025 armv7l
Previous/Reset: Months old/Yes
Mode/Status: AP/Running
Issues/Errors: None

Seems to work fine. No issues other than crashing wan. Still the same issue as few codes before. I really do not think it code based. Rather my router issue. I do not have nas feature on anymore. IT crashed still in couple of days. Today I modded the router with 50mm fan running @ 5V. Temperatures dropped from steady 80'c to slightly fluctuating 60'c. Let's see.

[baboeska]

Router/Version: Linksys EA6900 (XAC1900 with glitch 32kb+nvram mod)
File/Kernel: 61337
Previous/Reset: 61264, full reset after web gui failed on 61264
Mode/Status: Android tether, wifi ap
Issues/Errors: No visible issues so far.

Webgui crashed after a few hours on 61264, nvram also exceeded 32kb (33kb).
I had thought I'd done the 32kb+ nvram mod but that might not work so well with xac1900's.

Thanks for the hard work, no problems so far with current version.