ho1Aetoo
DD-WRT Guru
Joined: 19 Feb 2019
Posts: 3637
Location: Germany
|
 Posted: Sat May 17, 2025 10:10 Post subject: Basic VLAN configuration via GUI |
 |
For all routers with 2 CPU ports that use swconfig
e.g. ASROCK G10, Buffalo WZR-450HP2, Comfast CF-WR650AC, D-Link DAP-3662, DIR-862L, LINKSYS EA8500, Marvell WRT1200AC, WRT1900AC, WRT1900ACV2, WRT1900ACS, WRT3200ACM, WRT32X, NETGEAR R7800, XR500, XR450, R7500, R7500V2, TP-LINK Archer C7 v1-3, TL-WR1043ND v2 etc...
Various firmware builds
swconfig - VLAN configuration via GUI - 2 CPU ports
For all routers with 2 CPU ports and a separate WAN port that use swconfig
e.g. D-Link DIR-615 E3, TP-Link TL-WR740N v4, and more....
swconfig - VLAN configuration via GUI - 2 CPU ports (separate WAN)
For all routers with 1 CPU ports that use swconfig
many many Broadcom routers except the very old ones with very little flash memory and old kernel version
swconfig - VLAN configuration via GUI - 1 CPU port
For all routers that use DSA (Distributed Switch Architecture)
e.g. ASUS RT-AX89X, BUFFALO WXR-5950AX12, WXR-6000AX12B, WXR-6000AX12P, WXR-6000AX12S, Dynalink DL-WRX36, Linksys MR5500, MR7350, MX4200, MX4300, MX5500, MX8500 etc...
also with new DSA drivers ASROCK G10, LINKSYS EA8500, Marvell WRT1200AC, WRT1900AC, WRT1900ACV2, WRT1900ACS, WRT3200ACM, WRT32X, NETGEAR R7500, R7500V2, R7800, XR450, XR500 etc...
DSA bridge filtering - VLAN configuration via GUI |
|
