Joined: 08 May 2018 Posts: 16208 Location: Texas, USA
Posted: Mon Feb 28, 2022 18:33 Post subject:
Hardware donation / fullflash dump, please. It's easier for the developer if he has a test device in his possession. Unless you have patches to submit to add support...
Joined: 06 Jun 2006 Posts: 7729 Location: Dresden, Germany
Posted: Tue Mar 01, 2022 8:14 Post subject:
sorry. had some private troubles. sometimes worlds collide in a unexpected way. anyway. please do a full flash dump. not just bootloader. everything you can get. usually you can do this from commandline of the dlink console using cat and some program you find in the box. i often missuse the vendors webserver to transfer files locally _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Also Uboot does not pause to allow me to change the boot options.
Code:
20:22:36.253> Image1 Stable Flag --> Stable
20:22:36.316> Image1 Try Counter --> 0
20:22:36.316>
20:22:36.316> Image1: OK Image2: OK
20:22:36.316>
20:22:36.316> =================================================
20:22:36.316>
20:22:36.316> Please choose the operation:
20:22:36.316> 1: Load system code to SDRAM via TFTP.
20:22:36.316> 2: Load system code then write to Flash via TFTP.
20:22:36.316> 3: Boot system code via Flash (default).
20:22:36.316> 4: Entr boot command line interface.
20:22:36.316> 6: System Enter UBoot to Update Img or Bin.
20:22:36.316> 7: Load Boot Loader code then write to Flash via Serial.
20:22:36.316> 9: Load Boot Loader code then write to Flash via TFTP.
20:22:36.316> default: 3
20:22:37.379> 0
20:22:37.379>
20:22:37.379> 3: System Boot system code via Flash.
20:22:37.379> ## Booting image at bc180000 ...
20:22:37.379> Image Name: Linux Kernel Image
20:22:37.379> Image Type: MIPS Linux Kernel Image (lzma compressed)
20:22:37.379> Data Size: 17599312 Bytes = 16.8 MB
20:22:37.379> Load Address: 81001000
20:22:37.379> Entry Point: 81622ae0
I was not able to login to the serial console so I went back to trying Uboot menu option 4 to create the dump. I had to send "4" every 1ms and that worked to override the default option.
Code:
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
6: System Enter UBoot to Update Img or Bin.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
default: 3
