[BUILD PULLED] New Build - 05/10/2025 - r61179

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 6245

PostPosted: Sat May 10, 2025 7:27    Post subject: [BUILD PULLED] New Build - 05/10/2025 - r61179 Reply with quote
Welcome to x86 / x64 r61179 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r61025 (mirror)

OpenVPN 2.6.14: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582 r59661 r59765 r59820
r59887 r59964 r60090 r60098 r60121 r60137 r60217 r60269 r60276 r60467 r60511 r60523 r60586 r60621 r60652 r60662
r60697 r60717 r60742 r60771 r60791 r60832 r60942 r61025 r61179

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 875

PostPosted: Sat May 10, 2025 9:28    Post subject: Reply with quote
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin

status: No WAN PPPoE connection possible.
same error as reported in previous release 05/06/2025 - r61025.

cat /var/log/messages |grep -i ppp gives:

Code:

May 10 13:19:57.061 N4000 kern.info kernel: [    0.985618] PPP generic driver version 2.4.2
May 10 13:19:57.061 N4000 kern.info kernel: [    0.985708] PPP BSD Compression module registered
May 10 13:19:57.061 N4000 kern.info kernel: [    0.985717] PPP Deflate Compression module registered
May 10 13:19:57.061 N4000 kern.info kernel: [    0.985740] PPP MPPE Compression module registered
May 10 13:19:57.062 N4000 kern.info kernel: [    0.985749] NET: Registered PF_PPPOX protocol family
May 10 13:20:27.873 N4000 daemon.err pppd[4046]: /usr/lib/rp-pppoe.so has no initialization entry point
May 10 13:20:27.874 N4000 user.info : [pppd] : Error on startup, returncode 2
May 10 13:20:27.885 N4000 user.info : [ppp_redial] : successfully started
May 10 11:19:04.537 N4000 daemon.err pppd[4928]: /usr/lib/rp-pppoe.so has no initialization entry point
May 10 11:19:04.538 N4000 user.info : [pppd] : Error on startup, returncode 2
May 10 11:19:46.377 N4000 daemon.err pppd[5595]: /usr/lib/rp-pppoe.so has no initialization entry point
May 10 11:19:46.378 N4000 user.info : [pppd] : Error on startup, returncode 2
May 10 11:20:28.246 N4000 daemon.err pppd[6262]: /usr/lib/rp-pppoe.so has no initialization entry point
May 10 11:20:28.246 N4000 user.info : [pppd] : Error on startup, returncode 2


Back to working release 04/28/2025 again.

These are my PPP settings:


Wating for upcoming release.
Edit: Brainslayer commented in QCA build report Thread. PPP issue has been found!
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=338588
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum