Posted: Thu Apr 24, 2025 3:40 Post subject: New Build - 04/24/2025 - r60742
Welcome to Atheros r60742 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Thu Apr 24, 2025 9:44 Post subject: Linksys MR7350
Update method: WebUpgrade
Router/Version: Linksys MR7350
File: 60742
Previous/Reset: 60717 / no
Mode/Status: Gateway / ok
Issues/Errors: If you are seeing this post, all is ok
Thank you again BS and friends.\0
Router/Version: Linksys MR7350
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r60742 std (04/24/25)
Kernel: Linux 6.6.87-rt29 #3132 SMP Wed Apr 23 12:26:12 +07 2025 aarch64
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, bridged VAP on 2.4GHz, Wireguard for external access, WAN disabled, Keep Alive reboot 6:02 in the morning, using my own local NTP
Reset: No
Status: Ok. WiFi 6 devices reach 9xx Mbit/s in iperf3 against the router, everything stable. All devices connecting fine (including VAP).
Netgear R9000 File: DD-WRT v3.0-r60742 std (04/24/25)
Kernel: Linux 4.9.337 #768 SMP Thu Mar 20 12:30:25 +07 2025 armv7l
Reset: No
Uptime: >48 hrs
All utilized features work fine after 15 hours. Apart from issues below.
Issue/Error:
1. Both 5GHz & 2.4Ghz work but their LEDs are off. However, if WLAN2/60Ghz is activated, 5GHz & 2.4Ghz STOP working but their LEDs are on.
Added:
2. vAP unstable. Kept dropping off and reconnecting. This issue was not apparent earlier.
*** Initially everything was working, but within several hrs. both Netgear R7800s began crashing and rebooting. Went back to r60697 on both. The remaining Linksys ea8500 has remained stable but I unplugged it and will deal with it in the morning. Sorry, no logs .... _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Joined: 07 Jan 2025 Posts: 154 Location: Bethel Park, PA, USA
Posted: Fri Apr 25, 2025 13:34 Post subject:
Router/Version: Linksys MR7350 x 3
File/Kernel: DD-WRT v3.0-r60742 std (04/24/25), Linux 6.6.87-rt29 #3132 SMP Wed Apr 23 12:26:12 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r60717 std (04/21/25), last reset on r60098
Mode/Status: Gateway (NSS-ECM), Access Point (5GHZ-HT20 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:UNITED STATES), performance governor, IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 Wired access points (2.4GHz-HT20 N/G Mixed, 5GHZ-HT80 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:UNITED STATES)
Issues/Errors:
Up 22 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed, wired and wifi, is very close to published, which is equal or favorable to the ISP router - tested via nPerf.com. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares. 5GHz showing 27dBm (set to 30dBm). 2.4GHz showing 28dBm (also set to 30dBm).
Almost a day without issues. The last several builds have been very stable for me.
Router/Version: TP-Link TL-WR1043ND v2
Update method: WebUpgrade
File/Kernel: tplink-tl-wr1043nd-v2.bin
Previous/Reset: r59468 / YES
Mode/Status: router
Issues/Errors:YES and for a long time.
Hello, I tried again and the OpenVPN server still doesn't work...
02-02-2025-r59468=OpenVPN server working for me
02-09-2025-r59582=OpenVPN server stopped working for me.
Even with the latest build OpenVPN server still doesn't work. Is it even worth writing about here?
Either the developers don't read it or are they really that incompetent that they can't fix one small bug? It can be fixed in a few minutes by the developer so where's the problem?
Previous code (error still the same in the new build):
Code:
Apr 19 16:21:38.563 TP-LINK daemon.err openvpn[1002]: MyIP:40686 VERIFY ERROR: depth=0, error=no support for error strings built in: CN=egcs-client1, serial=.....
...
Apr 19 16:22:20.445 TP-LINK daemon.err openvpn[1002]: MyIP:40535 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
