Posted: Mon Apr 21, 2025 12:51 Post subject: New Build - 04/21/2025 - r60717
Welcome to Atheros r60717 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 07 Jan 2025 Posts: 154 Location: Bethel Park, PA, USA
Posted: Mon Apr 21, 2025 16:12 Post subject:
Router/Version: Linksys MR7350 x 3
File/Kernel: DD-WRT v3.0-r60717 std (04/21/25), Linux 6.6.87-rt29 #3112 SMP Mon Apr 21 09:26:11 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r60697 std (04/19/25), last reset on r60098
Mode/Status: Gateway (NSS-ECM), Access Point (5GHZ-HT20 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:UNITED STATES), performance governor, IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 Wired access points (2.4GHz-HT20 N/G Mixed, 5GHZ-HT80 AX/AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:UNITED STATES)
Issues/Errors:
Up 3 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed, wired and wifi, is very close to published, which is equal or favorable to the ISP router - tested via nPerf.com. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares. 5GHz showing 26dBm (set to 30dBm). 2.4GHz showing 28dBm (also set to 30dBm).
Update to - r60717 Failed: upgraded via renamed firmware.bin in /tmp
Reset:
Mode: Gateway
Status: Soft Bricked
WAN Connection Type: DHCP - Disconected for flash!
Services Used: PPPoE Gateway Mode, IPV4, Isolated Vlans, WiFi Not used, WireGuard Server & Client, DNSMasq Static leases on jffs, Cloudflare SmartDNS, DNSMasq Adblocking via EGC script on jffs.
Errors: Upgraded via renamed firmware.bin in /tmp, failed to boot. I had removed jffs USB for flash and disconnected WAN. Sadly soft bricked the router, had to recover with initramfs USB, back on 60284 which is actually listed as r60276 _________________ Main Router: Dynalink WRX36, PPPoE, Gateway Mode, Network IPV4 - Isolated Vlan's. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. Paid Commercial Wireguard Client's & WG server, DNSMasq, Static Leases with Cloudflare SmartDNS, DNSMasq Adblocking via egc script.
No one can build you the bridge on which you, and only you, must cross the river of life!
Router/Version: Netgear R9000
Update method: WebUI
File/Kernel: r60717 / Linux 4.9.337 #768 SMP Thu Mar 20 12:30:25 +07 2025 armv7
Previous/Reset: r60697/ No
Mode/Status: Gateway / Working normally 30hrs
Issues/Errors: Wifi status lights are off
Router/Version: Netgear R7500v2
Update method: WebUI
File/Kernel: r60717/ Linux 6.1.134-rt28 #542 SMP Fri Apr 18 03:39:54 +07 2025 armv7l
Previous/Reset: r60697 / No
Mode/Status: Wired AP / Working normally 8hrs
Issues/Errors: MiniDLNA not loading
I noticed the DLNA server is not loading on my R7500v2, section of logs attached.
Netgear R9000 File: DD-WRT v3.0-r60717 std (04/21/25)
Kernel: Linux 4.9.337 #768 SMP Thu Mar 20 12:30:25 +07 2025 armv7l
Reset: No
Uptime: >1 day
Issue/Error: When WLAN2/60Ghz is activated, 5GHz & 2.4Ghz stop working but their LED are on.
When deactivated, both 5GHz & 2.4Ghz work, but their LEDs are off.
@tisaty4m: did you clear your browser's cache or try CTRL+F5? I will query the developer as he has an RT-AX89U.
I tried. And I think it's not a browser error.
If I need to upload settings, I install an old firmware. For example, February 2025. And upload config. Then install the new firmware.
Joined: 06 Jun 2006 Posts: 7726 Location: Dresden, Germany
Posted: Wed Apr 23, 2025 2:43 Post subject:
tisaty4m wrote:
Hi. For a long time now, new firmware versions have been unable to restore saved settings. Please fix this. Thank you.
Router ModelAsus RT-AX89X-B1
works for me. no issue. your screenshot doesnt show that its not working, it only shows that you created the backup with a older version and the router name has changed in the backup. there is a force option in the restore gui to override the router name check _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Hi. For a long time now, new firmware versions have been unable to restore saved settings. Please fix this. Thank you.
works for me. no issue. your screenshot doesnt show that its not working, it only shows that you created the backup with a older version and the router name has changed in the backup. there is a force option in the restore gui to override the router name check
I think he's referring to the fact that he doesn't have Backup or Restore buttons in the WebUI. But you're saying it's working for you, so obviously you have those buttons.
Since nobody else has reported this issue except for @tisaty4m, I would guess he needs a factory reset and manual reconfigure from scratch.
Have you tried that @tisaty4m ? _________________ - Linksys EA8500: I-Gateway, WAP/VAP 5ghz only. Features: VLANs, Samba, WG, Entware - r60xxx
- Linksys EA8500: 802.11s Secondary w/VLAN Trunk over 5ghz - r60xxx
- Linksys MX4300: 802.11s Primary w/VLAN Trunk over 5ghz. 2.4ghz WAP/VAP only - r60xxx
- Linksys MX4300: (WAP/VAP (7)) Multiple VLANs over single trunk port. Entware/Samba r60xxx
- Linksys MR7350: WDS Station for extended Ethernet r60xxx
- Linksys MR7500, MX8500: None in production. Just testing. r60xxx
- OSes: Fedora 40, 10 RPis (2,3,4,5), 23 ESP8266s: Straight from Amiga to Linux in '95, never having owned a Windows PC.
- Forum member #248
