[blkt]

Welcome to Broadcom r60662 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r60652 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582 r59661 r59765 r59820
r59887 r59964 r60090 r60098 r60121 r60137 r60217 r60269 r60276 r60467 r60511 r60523 r60586 r60621 r60652 r60662

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[ewo32]

Update method: CLI flash from SSH
Router/Version: Asus RT-AC68U C1
File/Kernel: asus_rt-ac68u-firmware.trx / Linux 4.4.302-rt232-st62 #13435 SMP Wed Apr 9 07:57:15 +07 2025 armv7l
Previous/Reset: 60652 / No
Mode/Status: Gateway, AP, PPPoE, SFE, SmartDNS DoT, DDNS, wireguard server, 5GHz AC only, 2.4GHz N only, WPA2-PSK CCMP, SSH public key
Issues/Errors: None

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-60662_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st62 #37384 Thu Apr 10 06:44:01 +07 2025 mips
Previous/Reset: 60652 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 5:12 hours
CPU Temperature: WL0 46.0 °C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

Thank you BS and gurus!

[an225]

Router/Version: Asus RT-AC68U A2
Update Method: WebUpgrade
Previous/Reset: 60137 / no

Mode/Status: Secondary router connected to ISP router, using WireGuard client (NordVPN) and WireGuard server. Router is operating on IPv4 only.
Issues/Errors: No internet access via WireGuard client or server.

First of all, I want to thank all the contributors for this great firmware. I'm not an IT expert, but thanks to the forum and its wiki, I managed to configure both a WireGuard client (to NordVPN) and a WireGuard server on my router.

It had been running perfectly for over a year, even through multiple DD-WRT updates — until the "60..." series.

I always use the same configuration.

However, after installing build r60090, the WireGuard client and server stopped working. I’ve tried resetting and reconfiguring everything, but it still doesn’t work. The router does have internet access outside of WireGuard (using IP exclusion).

Among the "60..." series, only build 60137 works. I’ve tested every build up to r60662, and none of them work — not even after a reset and full manual reconfiguration.

Just wanted to share my humble feedback from the perspective of a non-IT user who truly appreciates all the hard work that goes into this project. If anyone has advice or a solution, I’d be very grateful.

Regards

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r60662 std / Linux 4.4.302-rt232-st62 #13443 SMP Thu Apr 10 06:14:27 +07 2025 armv7l
Previous/Reset: 60652 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:29 hours
CPU Temperature: CPU 68.7 °C / WL0 42.0 °C / WL1 0.0 °C (ambient temperature 21.0 °C)
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[Vercety]

Router/Version: Asus RT-18U/A1
File/Kernel: 04-10-2025-r60662 › asus-rt-n18u.trx/Linux 4.4.302-rt232-st62 #13439 Thu Apr 10 05:52:16 +07 2025 armv7l
Update method: WebUpgrade
Previous/Reset: r60652/no reset
Mode/Status: Ap mode - samba/Up and running ok 6h
CPU Temperature:CPU55.8 °C WL045.5 °C
Issues/Errors: nothing
Samba-ftp: Work well with hdd on hdd dock
wifi 4gen: wifi4 up ch 40wide 2ch full and speed wifi is good

Router/Version: Asus RT-N66U /B1
File/Kernel: 04-10-2025-r60662 › asus-rt-ac66u.trx/Linux 4.4.302-rt232-st62 #37368 Thu Apr 10 06:23:40 +07 2025 mips
Update method: WebUpgrade
Previous/Reset: r60652/no reset
Mode/Status: Ap and samba/ Up and running ok 6h
CPU Temperature:WL048.0 °C
Issues/Errors: nothing
Samba-ftp: Work well with hdd on hdd dock
wifi wifi4 up ch 40wide 2ch full and speed wifi is good

Router/Version: Asus RT-N68U/A2
File/Kernel: 04-10-2025-r60662 › asus-rt-ac68u.trx/Linux 4.4.302-rt232-st62 #13435 SMP Wed Apr 9 07:57:15 +07 2025 armv7l
Update method: WebUpgrade
Previous/Reset: r60652/no reset
Mode/Status: Ap and samba/Up and running ok 6h
CPU Temperature:CPU62.5 °C WL045.8 °C WL147.3 °C
Issues/Errors: nothing
Samba-ftp: Work well with hdd on hdd dock
wifiwifi5 52ch 80+80 mixed low low verry hi signal and great wide ch and full speed/wifi4 up ch 40wide 2ch full and speed wifi

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r60662) / Linux 4.4.302-rt232-st62 #13435 SMP Wed Apr 9 07:57:15 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r60621 std (04/08/25) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[thommy181]

Router: Linksys EA6400
Kernel: Linux 4.4.302-rt232-st62 #13435 SMP Wed Apr 9 07:57:15 +07 2025 armv7l
Previous: r60652
Mode: Internet gateway, WIFI 5GHz AP, smartdns with DoH, iptables firewall, SSHd
Issues: Nothing significant
Uptime: more than 23h

All services on device working good. Performance is OK.

[saphirely]

Netgear R6250
Firmware DD-WRT v3.0-r60662 std (04/10/25)
Kernel Linux 4.4.302-rt232-st62 #13435 SMP Wed Apr 9 07:57:15 +07 2025 armv7l

Works stable. Thank you.

[KACTET]

Router/Version: Asus RT-AC88U
Update method: WebUpgrade
File/Kernel: asus_rt-ac88u-firmware.trx_r60662 std / Linux 4.4.302-rt232-st62 #13440 SMP Thu Apr 10 05:58:34 +07 2025 armv7l
Previous/Reset: 60652 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:31 hours
CPU Temperature: CPU 70.2 °C / WL0 46.3 °C / WL1 47.3°C (ambient temperature 20.0 °C)
Issues/Errors: yes

If your router's light turns red, don't worry. Internet connection is ok.

USB 2.0 and 3.0 do not work. When rebooting the device, power is supplied through the connector, but after turning on wireless networks, power is not supplied.

Transmit (TX) and/or receive (RX) errors

Thank you BS and gurus!

[Corsair1274]

Router/Version: Buffalo WZR-1750 DHPD
Update Method: WebUpgrade
Previous/Reset: 60098 / no

Mode/Status: WiFi Access only secondary router connected to Pfsense router, operating on IPv4 only.
Issues/Errors: I have 2 more of these that I wanted to revive for wireless but they somehow could not upgrade from much older beta builds from 2 years ago and somehow will not boot. Yes, I am aware of the risks

Been a while, but somehow good to be back on this forum

[kernel-panic69]

@Corsair1274: May require serial nvram erase then a reboot, or worst case is serial recovery. Would be helpful to have serial log of non-booting device for the developer.

[Corsair1274]

[twindragon6]

Wired download speed halved for some reason, 5GHz power output reduced. Other than that it works fine.

[kernel-panic69]

Possibly due to the new firewall feature bug that will be fixed in the next release:

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=338451

https://svn.dd-wrt.com/changeset/60612
https://svn.dd-wrt.com/changeset/60664
https://svn.dd-wrt.com/changeset/60678
https://svn.dd-wrt.com/changeset/60679