[blkt]

Welcome to x86 / x64 r60511 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r60502 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582 r59661 r59765 r59820
r59887 r59964 r60090 r60098 r60121 r60137 r60217 r60269 r60276 r60467 r60502 r60511

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[flood404]

These last few builds it seems I had to reset Nvram to get it to work right. It's ok though since I put the DD-WRT on a cheap SSD SATA drive. So I got it up and running on a fresh configuration. It took about 5 minutes after setting it up that everything seemed to work as expected.

Router/Version: 4770k 16gb ram Gigabyte board
File/Kernel: X64 vga full version
Previous/Reset: Had to reset.
Mode/Status: AP/NAS/Gateway
Issues/Errors: Seems ok.


Had to assign my system an ip address and set the gateway to 192.168.1.1 to access the webgui setup.

[cml750]

[cml750]

Router/Version: Dell Optiplex 5050 with i7-6700 & 16 GB RAM. Also have a Realtek 4 port 2.5 gbps PCI-E Network card.
File/Kernel: Full 2GB VGA
Previous/Reset: 60467 no reset
Mode/Status: Router
Issues/Errors: None after 5 hours