[blkt]

Welcome to Atheros r59582 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r59468 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[ramblin]

Router: Linksys ea8500 ... WDS Station
Firmware: DD-WRT v3.0-r59582 std (02/09/25)
Kernel: Linux 6.1.128-rt28 #530 SMP Mon Feb 3 06:12:04 +07 2025 armv7l
Reset: YES after GUI upgrade from r59171
Mode: 2.4 GHz only .. Firmware type VANILLA ..SFE Disabled
Errors: No reconnection to AP with virtual interface added

Where we are at: After upgrade GUI came back and it showed a network connection but I was unable to connect to my WDS AP. I then did a manual reset, entered my settings, disabling my virtual and rebooted. Instantly I connected to my AP with internet connection. I then added back my virtual WDS AP. Rebooted and no connection to my WDS AP again. I then tried my virtual as just "AP" and rebooted with no AP connection. I then disabled virtual, rebooted and instantly connected. Any help here would be appreciated.

EDIT: Rolled back to r59171, added my VAP and all is well again. Guess I`ll park here for a while.

[mrjcd]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r59582 std (02/09/25)
Linux 6.1.128-rt28 #530 SMP Mon Feb 3 06:12:04 +07 2025 armv7l
GUI install over r59468
all I'm using looky good so far

[tli]

Router/Version: TP-Link Archer C7 v2 (US)
File: tplink_archer-c7-v2-US [02-09-2025-r59582].bin
Kernel: Linux 3.18.140-d6 #229590 Sun Feb 9 07:21:14 +07 2025 mips
Previous: tplink_archer-c7-v2-US [01-14-2025-r59171].bin
Reset: No
Mode: Gateway Router (with WiFi disabled; 2 OEM WAPs connected via LAN)
Status: All gateway functions seem to be working for my setup.
Uptime: >8 hours

[lexridge]

[KACTET]

Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r59582 / Linux 3.18.140-d6 #229570 Sun Feb 9 06:43:58 +07 2025 mips
Previous/Reset: r59468/ / no
Mode/Status: AP wired and wireless / Up and running for 2:25
Issues/Errors: no

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[whitebeard]

Router/Version: Netgear R7500v2
Kernel: Linux 6.1.128-rt28 #530 SMP Mon Feb 3 06:12:04 +07 2025 armv7l
Previous/Reset: 59171 / No Reset
Mode: Gateway+AP, SFE Disabled, STP Disabled, Wifi 5(VANILLA)/2.4(VANILLA) Main+Guest(VAP), DNSMasq, USB(3.2, Ext2)/Entware, DNSCrypt, NAS/Samba, Static & DHCP, SSH, FTP.
Issues/Errors: All seems Ok.

Thanks to BS and crew for all your good work.

[lexridge]

Router/Version: Linksys MR7500
File/Kernel: dd-wrt-webflash-mr7500-r59582.bin
Previous/Reset: dd-wrt-webflash-mr7500-r59429.bin / Full reset
Mode/Status: Testing
Issues/Errors: Testing WDS w/VAPS

WDS does not work with a VAP attached to it. This results in killing both WDS and VAP.

wlan0 in Station(WDS) mode. vlan0.1 VAP. Looks like this is where it fails:

[mrjcd]

[bushant]

R7800 WDS AP

Previous 59171
No reset
SCP/CLI Upgrade

GUI never came up
reboot didn't help
stopservice httpd && startservicehttpd brought it up for a moment then vanished when I changed tab
Would not come back up

Everything else was working including bridged VAP on br1

[ewo32]

Update method: CLI / SSH flash from konsole over wireless
Router: Linksys MX4200 v1
Firmware: DD-WRT v3.0-r59582 std (02/09/25)
File: dd-wrt-webflash.bin
Kernel: Linux 6.6.75-rt29 #2465 SMP Sun Feb 9 05:37:04 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r59171 std (01/14/25) / No

• general - all settings default unless otherwise stated, telnet disabled, web access HTTPS only
  
• general wireless- domain Panama, max TX power 22dBm all radios
  
• setup - WAN to ONT, Gateway, AP, PPPOE, ignore WAN DNS, NSS-ECM, non-default router IP
  
• ddns - SSL/TLS, force update interval 1
  
• dnsmasq - encrypt DNS, quad9, DNSSEC, check unsigned DNS replies, no DNS rebind enabled, RFC4039 enabled
  
• wlan0 - 5GHz, AC-only, VHT80, WPA3 Personal AES
  
• wlan1 - 2.4GHz, N-only, HT40, WPA3 Personal AES
  
• wlan1.1 - 2.4GHz guest network, WPA2 Personal AES, unbridged, AP isolation, net isolation, DHCPD, web UI disabled
  
• wlan2 - 5GHz, AX-only, HE80, WPA3 Personal AES
  
• ssh - non-default port, public key, password login disabled
  
• wireguard server - non-default port, preshared key
  

Status: Stable.
Issues/Errors: None.

Thanks @mlandi and @dplotz for identifying and diagnosing the IP address problems for wireless VAPs over the past few builds. Earlier IP address problems for MX4200 v1 are now fixed - unbridged 2.4GHz guest network is now working again. Thanks also to mods for sending emails up the chain, and to @brainslayer for the fix. MX4200 v1 range and throughput have improved in this build. Leaving radios at region Panama for the time being, but will keep monitoring.

[dplotz]

Router/Version: Linksys MR7350 x 3
File/Kernel: DD-WRT v3.0-r59582 std (02/09/25), Linux 6.6.75-rt29 #2463 SMP Sat Feb 8 21:54:05 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r59171 std (01/14/25), last reset on 58785
Mode/Status: Gateway (NSS-ECM-SFE), Access Point (5GHZ AC/N mixed, WPA2/WPA3, 802.11r/v/k, guest network, domain:PANAMA), performance governor, IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 Wired access points (DD-WRT firmware, 2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k, guest network, domain:PANAMA)
Issues/Errors:
Up 6.5 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed (tested via nPerf.com) is very close to published, which is equal or favorable to the ISP router. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares. 5GHz showing 27dBm (set to 30dBm). 2.4GHz showing 28dBm (also set to 30dBm).

Thank you Brainslayer, the guest VAPs are now working as expected!

[Zyxx]

@dplotz:
Since I'm debugging my MR7350 related WiFi "Problem" ("Spurious quick kickout" messages under load, until devices cease to work at all (only 5GHz modes higher than N only 5GHz).

There are no similar messages in your syslogs at all?

It is enough to start a local iperf or visit nperf.com for a test and the log gets those messages for at least two devices of mine in 5GHz WiFi, until I reduce to N only.

I'm not sure how to proceed, since some devices of mine work flawless with higher modes, but all devices were working without such problem on my old netgear R7800.

[Deltabongo2]

Router/Version: D-Link DIR-859 rev A3
Firmware: DD-WRT v3.0-r59582 std (02/09/25)
File/Kernel: dir859-webflash.bin/Linux 3.18.140-d6 #229602 Sun Feb 9 07:47:46 +07 2025 mips
Previous: DD-WRT v3.0-r59468 std (02/02/25)
Update Method: GUI
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2 x 2.4 GHz guest (VAP), 5.0 GHz - Vanilla, IPv4, DHCP, DNSMasq, Port Forwarding, SFE automatically disabled due to unbridged guest VAPs.

Issues/Errors: None.

The issue I was having with clients connecting to the 2.4Ghz VAPs but not receiving an IP address from DHCP when running r59468 has been resolved.

Big thanks to the Devs!

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000
File/Kernel: DD-WRT v3.0-r59582 std (02/09/25) / Linux 4.9.337 #762 SMP Sat Jan 11 09:01:19 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r59171 std (01/14/25) / Linux 4.9.337 #762 SMP Sat Jan 11 09:01:19 +07 2025 armv7l
Mode/Status: Gateway / Working Normally
Issues/Errors: None

No issues at all with devices connecting to my VAP on the 2.4Ghz radio. No IP issues. Thanks, BS!