Posted: Mon Jan 13, 2025 1:01 Post subject: [BUILD PULLED] New Build - 01/12/2025 - r59156
Welcome to Atheros r59156 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 03 Nov 2015 Posts: 354 Location: Florida, USA
Posted: Mon Jan 13, 2025 3:42 Post subject:
ccbrianf wrote:
Caution: r7800 no Wireless tab on first flash!
Router: Netgear R7800 ... WDS AP
Firmware: DD-WRT v3.0-r59156 std (01/12/25)
Kernel: Linux 6.1.124-rt28 #525 SMP Sat Jan 11 09:32:40 +07 2025 armv7l
Reset: NO ... GUI upgrade from r59045
Mode: 2.4 GHz only .. Firmware type VANILLA ..SFE Disabled
Errors: Reboot issues
*** Similar to my last r7800 upgrade to r59045..... UPGRADE, WAIT 10 min. White page. NO GUI, NO internet connection. NO access to router..... REBOOT, WAIT 10 min. again. NO GUI or connection. This time, just for giggles, I unplugged the power strip and rebooted the ISP modem and r7800 together. In about 4 min. everything came back up together, on r59156 and with a wireless tab. All seems to be working fine. _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Linksys EA8500...main gateway
DD-WRT v3.0-r59156 std (01/12/25)
Linux 6.1.124-rt28 #525 SMP Sat Jan 11 09:32:40 +07 2025 armv7l
scp 'firmware.bin' install over r59045
worky ok so far ...up 'bout 30 minutes
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r59156 std (01/12/25)
Kernel Version Linux 3.18.140-d6 #227284 Sun Jan 12 06:03:54 +07 2025 mips
Update from r59093 via CLI
Reset: no
Working OK as AP, NG mixed, HT40.
Issue: I recently started using services prioritization in QOS tab. I noticed that the last service rule is always showing an enormous number for the packets. The number is not real, if I simply add another rule the new last one is showing a large number and the previously last one shows 0. I don't know when this issue started, I first noticed it a couple of days ago with r59093.
I attached screenshots with random rules added as last rule.
Posted: Mon Jan 13, 2025 13:55 Post subject: WR841ND
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r59156 / Linux 3.18.140-d6 #227284 Sun Jan 12 06:03:54 +07 2025 mips
Previous/Reset: r59093 / no
Mode/Status: AP wired and wireless / Up and running for 3:21
If your router's light turns red, don't worry. Internet connection is ok.
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 59468
Broadcom
Asus RT-AC87U R - DD-WRT 59468
Asus RT-N66U - DD-WRT 59468
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2